Hello all, I am new to pd and dont have any experience with pd to, i am learning. What i am trying to make is a controller for a rs-232 pan/tilt unit. I managed to give commands with zterm and it works fine. Command like pp2500 will set the pan movement to step 2500 for example. First thing i want to try is to give commands like that with Pd.
The settings for the pan/tilt unit are: The host terminal or computer should be set to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, and no parity. Hardware handshaking and XON/XOFF are not used.
Using OSX 10.3.9
The keyspan serial adaptor is: USA19QW181P1.]
I have been looking everywhere to see if i could find an example howto just give simple commands to the pan/tilt unit but i cant find it anywhere.
Would somebody be able to send me a Pd patch for it?
Thanks a lot, cheers
jasper