looks goooood! created: /Users/marius/devel/pd-rsync/pd-extended/packages/darwin_app/Pd-0.40.3-extended-20080411.dmg rm -f build.dmg hdiutil unflatten "Pd-0.40.3-extended-20080411.dmg" hdiutil: unflatten: unflattening "Pd-0.40.3-extended-20080411.dmg"... /Developer/Tools/Rez /Developer/Headers/FlatCarbon/*.r SLA.r -a \ -o "Pd-0.40.3-extended-20080411.dmg" hdiutil flatten "Pd-0.40.3-extended-20080411.dmg" hdiutil: flatten: flattening "Pd-0.40.3-extended-20080411.dmg"... upload specs darwin_app . dmg Uploading /Users/marius/devel/pd-rsync/pd-extended/packages/darwin_app/./Pd*.dmg @ERROR: access denied to upload from cpe-66-65-50-166.nyc.res.rr.com (66.65.50.166) rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-30/rsync/io.c(359) marius.
marius schebella wrote:
ok, the problem is that the following lines do not work on 10.5:
# this is necessary to deal with cross-platform echo issues with '-e' ifeq ($(shell echo -e|sed 's|^-||'),e) ECHO = /bin/echo else ECHO = echo endif
or maybe they work, but somehow this still calls /bin/echo, even if I uncomment the whole thing and hardcode it to "echo" some lines down, Makefile is still using /bin/echo, but should be using /sw/bin/echo, because which echo says /sw/bin/echo. I had to change $(ECHO) to /sw/bin/echo and then it compiled, but that's of course no solution for other platforms. let's see if the rest of pd-extended compiles... marius.
Hans-Christoph Steiner wrote:
you are probably running your tests in your default 'bash' environment. The script runs in its own 'sh' environment, which is most likely somewhat different.
Try the test in a test.sh script with #!/bin/sh at the top.
.hc
On Apr 11, 2008, at 11:12 AM, marius schebella wrote:
I cannot confirm that:
echo -e marius\nhans prints out
marius hans
as expected. but maybe the problem is that ECHO = echo prints out = echo marius.
Hans-Christoph Steiner wrote:
It's actually, the "-e" option to 'echo', which means "interpret extended syntax", like "\n". Not all 'echo's support it. Your 'echo' does not, it just echos the "-e" and "\n" unchanged. Basically, someone needs to rewrite that chunk to not rely on a specific version of 'echo'. I think it could be done with 'sed' easily, or perhaps 'printf', if anyone wants to give it a shot. .hc On Apr 10, 2008, at 9:05 PM, marius schebella wrote:
I think the toxy error results from some sed problem, in particular the "-e" option of sed. sed seems to write a strange line into setup.wiq if I open it, the first line starts like
-e // Do not edit this file (edit "../test/toxy/setup.wid", and run "make").\n//\nputs stderr [concat loading built-in widget definitions] package provide toxywidgets 0.1.0.17
i am not a frequent sed user, and I also don't know what the makefile hack means, I think, hans, you added that, maybe for 10.5 it needs a special treatment:
ROOT_DIR = .. WIDPATH = $(ROOT_DIR)/test/toxy/setup.wid WIQFILE = $(notdir $(WIDPATH:.wid=.wiq)) # this is necessary to deal with cross-platform echo issues with '-e' ifeq ($(shell echo -e|sed 's|^-||'),e) ECHO = /bin/echo else ECHO = echo endif redefault: checkwiq $(WIQFILE) default checkwiq: @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \ echo ERROR: empty file $(WIQFILE)... removed ; \ rm -f $(WIQFILE) ; fi $(WIQFILE): $(WIDPATH) @echo transferring widget definitions from "$<" to "$@" # LATER think how to replace puts with pdtk_post $(ECHO) -e '// Do not edit this file (edit "$<", and run "make").\n//\nputs stderr [concat loading built-in widget definitions]' \ | cat - $< | sed \ -e '1,|//$$|{p;d;}' \ -e 's/([\"])/\\1/g' \ -e 's/^.*$$/"&\n"/' > $@ @if [ -f $(WIQFILE) ] && ! [ -s $(WIQFILE) ] ; then \ echo ERROR: transfer failed... $(WIQFILE) removed ; \ rm -f $(WIQFILE) ; fi include $(ROOT_DIR)/Makefile.common
marius.
Hans-Christoph Steiner wrote:
10.4 builds work on 10.5 fine, as far as I know. Are you having problems building or using binaries? Yes, Fink is not perfect, but imagine trying to build all that stuff by hand... and then write up instructions for someone else to do it... shudder...
- My FTGL update has be included in Fink, so no need for the
manual file install: http://pdb.finkproject.org/pdb/package.php/libftgl1
- I haven't run into the ptex-nox-base problem myself, I
generally try installing all of the dependencies from 'stable', then switch to 'unstable' for the rest. If an 'unstable' package adds more dependencies, then I switch back to 'stable' and try building them all there, then switch back to 'unstable' to finish everything. It may sound complicated, but it is not really. It is just some copy-n- pasting of package names, and running 'fink configure' a few times.
- the toxy build problem is the classic 'nifty hack' issue, where
the dev stuck some write-only code in the Makefile as a quick hack to get things working, then built the library upon that hack... .hc On Apr 10, 2008, at 4:03 AM, David Plans Casal wrote: > On 10 Apr 2008, at 01:35, bsoisoi wrote: > >> are you on 10.5? Welcome to the mac os x pd-extended nightmare > Hear hear. 10.5 build is becoming the first reason in ten years I've > looked for another dev platform than pd. Mind, I think maybe a > switch > back to old Linux is a better option. > > David > >> !B >> >> >> On Apr 9, 2008, at 7:52 PM, marius schebella wrote: >> >>> tried fink install coreutils-default and... >>> ... then I tried fink install sed and... >>> ... then it did not work still. >>> marius. >>> >>> >>> Hans-Christoph Steiner wrote: >>>> Arg, this bug again. There is some crazy scripting in this >>>> makefile, it >>>> is quite problematic: >>>> >>>> http://pure-data.svn.sourceforge.net/viewvc/pure-data/trunk/ >>>> externals/miXed/toxy/Makefile >>>> >>>> >>>> .hc >>>> >>>> On Apr 9, 2008, at 6:22 PM, marius schebella wrote: >>>>> hi, >>>>> trying to build an intel build of pd-extended and get an >>>>> error for >>>>> toxy, >>>>> don't know what is wrong. thanks, >>>>> marius. >>>>> >>>>> gcc -Wall -W -Wstrict-prototypes -Wno-unused -Wno-parentheses >>>>> -Wno-switch -march=pentium4 -msse2 -mfpmath=sse -ftree-vectorize >>>>> -ftree-vectorizer-verbose=2 -DUNIX -DMACOSX -I . -I ../../../pd/ >>>>> src -I >>>>> ../shared -c -o widgettype.o widgettype.c >>>>> In file included from widgettype.c:16: >>>>> setup.wiq:2: error: ‘e’ undeclared here (not in a function) >>>>> setup.wiq:2: error: syntax error before ‘package’ >>>>> In file included from widgettype.c:16: >>>>> setup.wiq:2:29: error: too many decimal points in number >>>>> setup.wiq:4:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:5:3: error: invalid preprocessing directive #glue >>>>> setup.wiq:6:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:7:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:8:3: error: invalid preprocessing directive #way >>>>> setup.wiq:9:3: error: invalid preprocessing directive #right >>>>> setup.wiq:11:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:14:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:18: error: syntax error before ‘{’ token >>>>> setup.wiq:23:3: error: invalid preprocessing directive #valid >>>>> setup.wiq:32:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:33:3: error: invalid preprocessing directive #In >>>>> setup.wiq:34:3: error: invalid preprocessing directive #try >>>>> setup.wiq:39:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:40:7: error: invalid preprocessing directive #pd >>>>> setup.wiq:73:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:80: error: syntax error before ‘{’ token >>>>> setup.wiq:99: error: syntax error before ‘{’ token >>>>> setup.wiq:106:3: error: invalid preprocessing directive #LATER >>>>> setup.wiq:111: error: stray ‘\’ in program >>>>> setup.wiq:131:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:133:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:148:3: error: invalid preprocessing directive #puts >>>>> setup.wiq:150:7: error: invalid preprocessing directive #puts >>>>> setup.wiq:154: error: ‘catch’ undeclared here (not in a >>>>> function) >>>>> setup.wiq:154: error: syntax error before ‘{’ token >>>>> setup.wiq:175:3: error: invalid preprocessing directive #puts >>>>> setup.wiq:187: error: syntax error before ‘&’ token >>>>> setup.wiq:187: error: ‘concat’ undeclared here (not in a >>>>> function) >>>>> setup.wiq:187: error: syntax error before ‘tcl’ >>>>> setup.wiq:188: error: stray ‘\’ in program >>>>> setup.wiq:192:3: error: invalid preprocessing directive >>>>> #empirically >>>>> setup.wiq:193:3: error: invalid preprocessing directive #better >>>>> setup.wiq:196: error: stray ‘\’ in program >>>>> setup.wiq:202: error: stray ‘\’ in program >>>>> setup.wiq:207:3: error: invalid preprocessing directive >>>>> #pdtk_canvas_mouseup >>>>> setup.wiq:214: error: stray ‘\’ in program >>>>> setup.wiq:243:3: error: invalid preprocessing directive #undo >>>>> setup.wiq:248:3: error: invalid preprocessing directive #to >>>>> setup.wiq:273:3: error: invalid preprocessing directive >>>>> #standard >>>>> setup.wiq:275:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:278: error: stray ‘\’ in program >>>>> setup.wiq:290: error: stray ‘\’ in program >>>>> setup.wiq:292: error: stray ‘\’ in program >>>>> setup.wiq:298:3: error: invalid preprocessing directive #puts >>>>> setup.wiq:299: error: syntax error before ‘{’ token >>>>> setup.wiq:315:3: error: invalid preprocessing directive #FIXME >>>>> setup.wiq:318:2: error: invalid preprocessing directive #> >>>>> setup.wiq:319:2: error: invalid preprocessing directive #. >>>>> setup.wiq:320:2: error: invalid preprocessing directive #. >>>>> setup.wiq:321:2: error: invalid preprocessing directive #. >>>>> setup.wiq:323:2: error: invalid preprocessing directive #> >>>>> setup.wiq:324:2: error: invalid preprocessing directive #. >>>>> setup.wiq:325:2: error: invalid preprocessing directive #. >>>>> setup.wiq:326:2: error: invalid preprocessing directive #. >>>>> setup.wiq:327:2: error: invalid preprocessing directive #. >>>>> setup.wiq:329:2: error: invalid preprocessing directive #> >>>>> setup.wiq:330:2: error: invalid preprocessing directive #. >>>>> setup.wiq:331:2: error: invalid preprocessing directive #. >>>>> setup.wiq:333:2: error: invalid preprocessing directive #@ >>>>> setup.wiq:336:2: error: invalid preprocessing directive #> >>>>> setup.wiq:337:2: error: invalid preprocessing directive #. >>>>> setup.wiq:338:2: error: invalid preprocessing directive #. >>>>> setup.wiq:339:2: error: invalid preprocessing directive #. >>>>> setup.wiq:340:2: error: invalid preprocessing directive #. >>>>> setup.wiq:341:2: error: invalid preprocessing directive #. >>>>> setup.wiq:342:2: error: invalid preprocessing directive #. >>>>> setup.wiq:344:2: error: invalid preprocessing directive #@ >>>>> setup.wiq:345: error: stray ‘#’ in program >>>>> setup.wiq:345: error: stray ‘#’ in program >>>>> make[3]: *** [widgettype.o] Error 1 >>>>> make[2]: *** [toxy_install] Error 2 >>>>> make[1]: *** [externals_install] Error 2 >>>>> make: *** [extended_install] Error 2 >>>>> >>>>> _______________________________________________ >>>>> PD-dev mailing list >>>>> PD-dev@iem.at >>>>> http://lists.puredata.info/listinfo/pd-dev >>>> >>>> ------------------------------------------------------------------- >>>> --------- >>>> >>>> >>>> Access to computers should be unlimited and total. - the hacker >>>> ethic >>>> >>>> >>>> >>> >>> _______________________________________________ >>> PD-dev mailing list >>> PD-dev@iem.at >>> http://lists.puredata.info/listinfo/pd-dev >> >> _______________________________________________ >> PD-dev mailing list >> PD-dev@iem.at >> http://lists.puredata.info/listinfo/pd-dev > > _______________________________________________ > PD-dev mailing list > PD-dev@iem.at
> http://lists.puredata.info/listinfo/pd-dev
I spent 33 years and four months in active military service and during that period I spent most of my time as a high class muscle man for Big Business, for Wall Street and the bankers. - General Smedley Butler _______________________________________________ PD-dev mailing list PD-dev@iem.at http://lists.puredata.info/listinfo/pd-dev
¡El pueblo unido jamás será vencido!
There is no way to peace, peace is the way. -A.J. Muste