last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[2]: Leaving directory `/…
[View More]home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_02.39.…
[View Less]
last 20 errors ----------------------------------------
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
last 15 lines ----------------------------------------
configure.ac:101: installing `./config.sub'
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/…
[View More]pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/Users/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[1]: *** [externals_install] Error 2
make: *** [extended_install] Error 2
ls: /Users/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory
upload specs darwin_app . dmg
Uploading
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync: connection unexpectedly closed (4 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_03.15.…
[View Less]
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[2]: Leaving directory `/…
[View More]home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_02.39.…
[View Less]
last 20 errors ----------------------------------------
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
last 15 lines ----------------------------------------
configure.ac:101: installing `./config.sub'
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/…
[View More]pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/Users/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[1]: *** [externals_install] Error 2
make: *** [extended_install] Error 2
ls: /Users/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory
upload specs darwin_app . dmg
Uploading
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync: connection unexpectedly closed (4 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_03.15.…
[View Less]
last 20 errors ----------------------------------------
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for …
[View More]user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_02.39.…
[View Less]
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[2]: Leaving directory `/…
[View More]home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-14/logs/2011-06-14_02.39.…
[View Less]
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Pd-extended".
The branch, patch_series has been updated
discards 7fb826f54c6967f81aad8b4816243ad1f7453a94 (commit)
via cbc5ddc521279f9bbb169af140d99347309ceaab (commit)
via 888952da46faffeafc28b9d58b9544bf6c96ed29 (commit)
via 42ce2c5ef5b1d92febc34d6ba70c54f05683ca80 (commit)
This update added new revisions …
[View More]after undoing existing revisions. That is
to say, the old revision is not a strict subset of the new revision. This
situation occurs when you --force push a change and generate a repository
containing something like this:
* -- * -- B -- O -- O -- O (7fb826f54c6967f81aad8b4816243ad1f7453a94)
\
N -- N -- N (cbc5ddc521279f9bbb169af140d99347309ceaab)
When this happens we assume that you've already had alert emails for all
of the O revisions, and so we here report only the revisions in the N
branch from the common base, B.
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit cbc5ddc521279f9bbb169af140d99347309ceaab
Author: IOhannes m zmoelnig <zmoelnig(a)iem.at>
Date: Tue May 24 19:05:58 2011 +0200
cleanup soundfile parsers: reduce number of casts
rather than doing:
nchannels = swap4(((t_nextstep *)buf)->ns_nchans, swap);
format = swap4(((t_nextstep *)buf)->ns_format, swap);
headersize = swap4(((t_nextstep *)buf)->ns_onset, swap);
we now do:
t_nextstep*nsbuf=(t_nextstep *)buf;
nchannels = swap4(nsbuf->ns_nchans, swap);
format = swap4(nsbuf->ns_format, swap);
headersize = swap4(nsbuf->ns_onset, swap);
this gives less warnings about type-punning, and makes the code more readable
(fewer casts to parse by humans :-))
commit 888952da46faffeafc28b9d58b9544bf6c96ed29
Author: IOhannes m zmoelnig <zmoelnig(a)iem.at>
Date: Tue May 24 19:05:18 2011 +0200
replace float/int casts with unions.
using float/int casts won't work with heavy optimization, as it breaks
type-punning.
see http://gcc.gnu.org/onlinedocs/gcc-4.5.0/gcc/Optimize-Options.html#index-fst…
commit 42ce2c5ef5b1d92febc34d6ba70c54f05683ca80
Author: IOhannes m zmoelnig <zmoelnig(a)iem.at>
Date: Tue May 24 19:00:45 2011 +0200
implement PD_BIGORSMALL() with unions
using float/int casts won't work with heavy optimization, as it breaks
type-punning.
see http://gcc.gnu.org/onlinedocs/gcc-4.5.0/gcc/Optimize-Options.html#index-fst…
-----------------------------------------------------------------------
Summary of changes:
po/fr.po | 982 ++++++++++++-----------------------------------------
src/d_math.c | 51 ++-
src/d_soundfile.c | 96 +++---
src/m_pd.h | 47 +++-
4 files changed, 349 insertions(+), 827 deletions(-)
hooks/post-receive
--
Pd-extended
[View Less]
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
configure.ac:7: installing `./missing'
Base/Makefile.am: installing `./depcomp'
configure.ac:45: required file `extra/pix_drum/Makefile.in' not found
autoreconf: automake failed with exit status: 1
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1
make[2]: Leaving directory `/…
[View More]home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-13/logs/2011-06-13_08.05.…
[View Less]