Hi list,
anyone knows how to get current FileName, Patch, or CanvasName?
I tried with iemgut, but it isn't working in Pd Vanilla...
Thanks, Jong
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2014-01-27 04:45, Jonghyun Kim wrote:
Hi list,
anyone knows how to get current FileName, Patch, or CanvasName?
I tried with iemgut, but it isn't working in Pd Vanilla...
iemguts is developed against Pd-vanilla, so i'm pretty sure it *is* working with this flavour of Pd.
it's probably important to compile iemguts against the very version of Pd you are using (e.g. don't try to run iemguts shipped with Pd-extended-0.43 with Pd-vanilla-0.45)
fgdmasr4 IOhannes
Thanks IOhannes,
I'm using Pd-0.45-4 (Vanilla)
My iemguts were from Pd-extended 0.43-4. You said this cause problem, right?
So, which version of IEMGUTS should I use?
Thanks, Jong
On Mon, Jan 27, 2014 at 9:28 AM, IOhannes m zmoelnig zmoelnig@iem.atwrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2014-01-27 04:45, Jonghyun Kim wrote:
Hi list,
anyone knows how to get current FileName, Patch, or CanvasName?
I tried with iemgut, but it isn't working in Pd Vanilla...
iemguts is developed against Pd-vanilla, so i'm pretty sure it *is* working with this flavour of Pd.
it's probably important to compile iemguts against the very version of Pd you are using (e.g. don't try to run iemguts shipped with Pd-extended-0.43 with Pd-vanilla-0.45)
fgdmasr4 IOhannes
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Icedove - http://www.enigmail.net/
iQIcBAEBCAAGBQJS5hiOAAoJELZQGcR/ejb4esEP/jDJNjvuH1Ga/w1wvioUkdX6 Q49dKXJnNkqMyaFaAOJwcDhJmKvjppLNIgsWpomBaqT/ZV4riSOhaFyceef3pULH rVzxfVrNmTkYILDqdQN9WliueBdvd1X3uqH+QeZSequn8K1culiGn2yLl5q8ckce c0mx5G4lrjQJXcVDypj2NmemDUZi0l5M42lWPjitR6/xVxSh6UDl6wqN6P1I5sSs Rlu7jlfQ+LjAReZywiEiZMmjl1AYZk9eDCUc44wY76G8INYa5Z19GtcVuDTU2rMX 6sOB+3OTr2gSeU8tB8xk1DRMaOIkBbGupG8CsSmzlkTfzEJPcmNzCHQ9aMpzrzUf xYqHOjFlj3edIC+buY+g44B2GvGEtpDRJo7kfIuV+XS3W+FeKZGlkgsUr8e+bxp1 QysPdL6Ey58Vk1t1tiUASj75b22qbOMOHzYU/d2tnYnMMJ4GkSndkGNXWKEQ4OzK KS0UizFkR4zYpXpkCya13W72p+MFHReWu440bPWfX7E0Kxn5L+Gis9GwGpuvZm1m yyoA/DHRVb0aHqnW1gT00I5rcIjHFbHL0cYpvIqnrGzWYOMx21kW8w8UrmB3vxjN geexObb5MvN7XhLcYveShHhnDoQoqml5lmSNJOJdEtJVlU+tjsOWHsDh5DhFQC8I Jb0mAEu4IUIeW3OKW//p =PrfX -----END PGP SIGNATURE-----
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2014-01-28 00:57, Jonghyun Kim wrote:
Thanks IOhannes,
I'm using Pd-0.45-4 (Vanilla)
My iemguts were from Pd-extended 0.43-4. You said this cause problem, right?
So, which version of IEMGUTS should I use?
the version of iemguts doesn't matter - iirc iemguts doesn't have any version numbers yet, so just use the latest and greatest.
the problem is, that you should make sure that the iemguts binary you are using was compiled against the very Pd-version you are using.
i don't provide any binaries (this is on purpose, please don't ask me for binaries). the only binaries available for download are the ones shipped with Pd-extended.
this gives you two possibilities:
- either use Pd-extended 0.43-4 with it's version of iemguts
- or compile iemguts yourself (it's not complicated if you have a
compiler)
fgamsdr IOhannes
Thanks IOhannes for the tip! I'll try it. I know you made many libraries for pd. I thanks so much!
On Tue, Jan 28, 2014 at 9:39 AM, IOhannes m zmoelnig zmoelnig@iem.atwrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2014-01-28 00:57, Jonghyun Kim wrote:
Thanks IOhannes,
I'm using Pd-0.45-4 (Vanilla)
My iemguts were from Pd-extended 0.43-4. You said this cause problem, right?
So, which version of IEMGUTS should I use?
the version of iemguts doesn't matter - iirc iemguts doesn't have any version numbers yet, so just use the latest and greatest.
the problem is, that you should make sure that the iemguts binary you are using was compiled against the very Pd-version you are using.
i don't provide any binaries (this is on purpose, please don't ask me for binaries). the only binaries available for download are the ones shipped with Pd-extended.
this gives you two possibilities:
- either use Pd-extended 0.43-4 with it's version of iemguts
- or compile iemguts yourself (it's not complicated if you have a
compiler)
fgamsdr IOhannes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 Comment: Using GnuPG with Icedove - http://www.enigmail.net/
iQIcBAEBCAAGBQJS52y3AAoJELZQGcR/ejb4trwP/2ajIJbhVifVBVfGwsYukPt4 8rWnrCxSfkUulOeGzQF/BwUGBgMHx5jyYu0iW1/pb3qIxQMRJX5jaoOGFaKijEDg 0tlN0nTEtmfB0GW+del2ZC9VgFtgX+Bx9ThGaGGBUe+nUu0tRBHn6JsroHQM65PO sEija/mv6NjDZsJnJElRZHxUGvt7kh70v7aIpOQVDPbEf8Lke5anKiVw0f//p/1H 3lJx4rfVGgT3v1R4qM2z+ybVZ+MfrnDxyyytcr3bOBYahtNB79k1Krjbr5UvdaMy G/fDGsu5YmpX8iYjPabwH46ufRSL6ZAo0iRcPSaXsnuo3LIzekP5gVvJSpmQwbUU tN5jpQT8ZUBDaeV2iMZeJm5vGSFyTPVLvMHZC5LCOrZFkmER7iCuheEvRHTPws9o 5zSoihFlnJYUWuHP70aesH+yhdm5yQpKldQDJHqxonWXcxihv/dutKZtsL7lN79w 8Pa5UXeSUhcJ2rqEAHfnBtEE8ChmVZICTXYL8zk8X1E9M1dd/PZ24Dmsb/9V076q 4CaXQlcrspXGc3v6LF/ZkqWfXCQcBb14suxRFmJ98R08suoz7XKXQHg7Cxi6ddpc oc9c4BlyKQtpPGQ7Bpje8cxO74pTGvoH6eTGXUYcXXxwHBtiw5GEo7U9+TXNczq3 6obhZSPOduashgg9UCI7 =rYWJ -----END PGP SIGNATURE-----
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-
IOhannes m zmoelnig -
Jonghyun Kim