hello again !
well, that's exactly what i tried. in PD Media -> Jack i can change the outputs but it always falls back to 2 outputs even if i disable the checkbox. also tried modding the .pdsettings where i changed the flags: -outchannels 8 odd, no?
also edited jacks patchbay to have 8 inputs from puredata labeled output0 to output7. dac in PD is assigned to [dac~ 1 2 3 4 5] PD output message...
error: signal outlet connect to nonsignal inlet (ignored)
thanks for your help, Dominik
On Mon, Jan 17, 2011 at 8:25 AM, ailo ailo.at@gmail.com wrote:
You choose the amount of inputs and outputs in the Media->Jack menu item. You can choose as many as you want for jack, I think. Then use qjackctl to connect inputs and outputs with other software.
You can also make qjackctl remember your connections in "Patchbay". I think you need to enable "Activate Patchbay persistance" in qjackctl -> Setup after you've made a Patchbay settings file.
On 01/17/2011 09:04 AM, dom kun wrote:
Hi all,
just have some trouble finding the right software. currently running the puredyne distribution (a derivative of ubuntu)
which
means rosegarden doesn't work, i also tried qtracker to trigger PD.
However, the problem i am facing is that i have difficulties using PD as
an
input into the sequencer to make use of the effects (don't like to build all by my own in PD) as
well
as using the sequencer outputs as inputs to PD (vocoder). so, basically i am talking about some routing software that runs under
Jack.
Unfortunately PD is aways trying to only give me 2 outputs, also i tried
the
dac~ 1 2 3 4 to have 4 outs i could then run several independent synths.
anyone got some idea? how do people run their laptop systems?
Thanks in advance, Dominik
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
-- ailo
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hi Dominik,
dom kun wrote:
hello again !
well, that's exactly what i tried. in PD Media -> Jack i can change the outputs but it always falls back to 2 outputs even if i disable the checkbox.
Have you clicked on 'Save all settings' in that box? That way Pd should 'remember' your audio settings including jack input/output channels.
Lorenzo.
also tried modding the .pdsettings where i changed the flags: -outchannels 8 odd, no?
also edited jacks patchbay to have 8 inputs from puredata labeled output0 to output7. dac in PD is assigned to [dac~ 1 2 3 4 5] PD output message...
error: signal outlet connect to nonsignal inlet (ignored)
thanks for your help, Dominik
On Mon, Jan 17, 2011 at 8:25 AM, ailo <ailo.at http://ailo.at/@gmail.com http://gmail.com/> wrote:
You choose the amount of inputs and outputs in the Media->Jack menu item. You can choose as many as you want for jack, I think. Then use qjackctl to connect inputs and outputs with other software. You can also make qjackctl remember your connections in "Patchbay". I think you need to enable "Activate Patchbay persistance" in qjackctl -> Setup after you've made a Patchbay settings file. On 01/17/2011 09:04 AM, dom kun wrote: > Hi all, > > just have some trouble finding the right software. > currently running the puredyne distribution (a derivative of ubuntu) which > means rosegarden doesn't work, > i also tried qtracker to trigger PD. > > However, the problem i am facing is that i have difficulties using PD as an > input into the sequencer > to make use of the effects (don't like to build all by my own in PD) as well > as using the sequencer outputs as inputs to PD (vocoder). > so, basically i am talking about some routing software that runs under Jack. > Unfortunately PD is aways trying to only give me 2 outputs, also i tried the > dac~ 1 2 3 4 > to have 4 outs i could then run several independent synths. > > anyone got some idea? how do people run their laptop systems? > > Thanks in advance, Dominik > > > > > _______________________________________________ > Pd-list@iem.at <mailto:Pd-list@iem.at> mailing list > UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list -- ailo _______________________________________________ Pd-list@iem.at <mailto:Pd-list@iem.at> mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hi Lorenzo,
Yes, i did check the box. However, i noticed that it didn't make any changes to the .pdsettings file as far as i can tell.
Dominik
On Thu, Jan 27, 2011 at 9:48 AM, Lorenzo Sutton lsutton@libero.it wrote:
Hi Dominik,
dom kun wrote:
hello again !
well, that's exactly what i tried. in PD Media -> Jack i can change the outputs but it always falls back to 2 outputs even if i disable the checkbox.
Have you clicked on 'Save all settings' in that box? That way Pd should 'remember' your audio settings including jack input/output channels.
Lorenzo.
also tried modding the .pdsettings where i changed the flags:
-outchannels 8 odd, no?
also edited jacks patchbay to have 8 inputs from puredata labeled output0 to output7. dac in PD is assigned to [dac~ 1 2 3 4 5] PD output message...
error: signal outlet connect to nonsignal inlet (ignored)
thanks for your help, Dominik
On Mon, Jan 17, 2011 at 8:25 AM, ailo <ailo.at http://ailo.at/@ gmail.com http://gmail.com/> wrote:
You choose the amount of inputs and outputs in the Media->Jack menu item. You can choose as many as you want for jack, I think. Then use qjackctl to connect inputs and outputs with other software.
You can also make qjackctl remember your connections in "Patchbay". I think you need to enable "Activate Patchbay persistance" in qjackctl -> Setup after you've made a Patchbay settings file.
On 01/17/2011 09:04 AM, dom kun wrote:
Hi all,
just have some trouble finding the right software. currently running the puredyne distribution (a derivative of
ubuntu) which
means rosegarden doesn't work, i also tried qtracker to trigger PD.
However, the problem i am facing is that i have difficulties
using PD as an
input into the sequencer to make use of the effects (don't like to build all by my own in
PD) as well
as using the sequencer outputs as inputs to PD (vocoder). so, basically i am talking about some routing software that runs
under Jack.
Unfortunately PD is aways trying to only give me 2 outputs, also
i tried the
dac~ 1 2 3 4 to have 4 outs i could then run several independent synths.
anyone got some idea? how do people run their laptop systems?
Thanks in advance, Dominik
Pd-list@iem.at mailto:Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
-- ailo
Pd-list@iem.at mailto:Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list