hello list!
i finally tracked down why the vasp examples shipping with pd extended aren't working (the ones at \doc\examples\vasp\pd-ex). The examples use vasp abstractions like vasp.lower.pd or vasp.re.pd which aren't included with pd extended. (even the VASP-HELP.pd is missing). but they are included in the archives at http://grrrr.org/ext/vasp/ in the subfolder vasp\pd. (but funny that the vasp version there is older than the one shipping with pd extended).
i wonder why this folder isn't included with pd extended? °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
and two problems with the examples: when i include vasp as library and add the path to the abstractions, the examples load well and don't produce any errors. but i still can't get convolve.pd and loudness.pd to work. with convolve, "start convolution" doesn't produce any output in buf_res (yes, the source buffers are loaded and the lengths are adjusted), "pd do" only outputs the sample count but buf_res always stays empty. and with loudness, i only get a "+" at the output.
thanks for helping fabbre
It's most likely just a matter of someone doing the work to get it
all included. You can start with making bug reports, that makes it
easier to track what needs doing. Even better, you could do the work
needed. :)
.hc
On Apr 30, 2008, at 8:42 PM, Langsam Wieder wrote:
hello list!
i finally tracked down why the vasp examples shipping with pd extended aren't working (the ones at \doc\examples\vasp\pd-ex). The examples use vasp abstractions like vasp.lower.pd or vasp.re.pd which aren't included with pd extended. (even the VASP-HELP.pd is missing). but they are included in the archives at http://grrrr.org/ext/vasp/ in the subfolder vasp\pd. (but funny that the vasp version there is older than the one shipping with pd extended).
i wonder why this folder isn't included with pd extended? °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
and two problems with the examples: when i include vasp as library and add the path to the abstractions, the examples load well and don't produce any errors. but i still can't get convolve.pd and loudness.pd to work. with convolve, "start convolution" doesn't produce any output in buf_res (yes, the source buffers are loaded and the lengths are adjusted), "pd do" only outputs the sample count but buf_res always stays empty. and with loudness, i only get a "+" at the output.
thanks for helping fabbre
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther
King, Jr.
hi fabbre, I am not sure which pd-ext version you mean. but for the autobuilds there is no vasp binary at all, because it is flext based. you can get the latest releases at http://grrrr.org/ext/beta/pd (I am not sure why they are not linked on the main vasp page). I think it should be possible to get flext based externals working in autobuilds, too, it is really mainly a problem of someone having the time to do the work. for the next pd-extended release I could help getting all the vasp files together. marius.
Hans-Christoph Steiner wrote:
It's most likely just a matter of someone doing the work to get it
all included. You can start with making bug reports, that makes it
easier to track what needs doing. Even better, you could do the work
needed. :).hc
On Apr 30, 2008, at 8:42 PM, Langsam Wieder wrote:
hello list!
i finally tracked down why the vasp examples shipping with pd extended aren't working (the ones at \doc\examples\vasp\pd-ex). The examples use vasp abstractions like vasp.lower.pd or vasp.re.pd which aren't included with pd extended. (even the VASP-HELP.pd is missing). but they are included in the archives at http://grrrr.org/ext/vasp/ in the subfolder vasp\pd. (but funny that the vasp version there is older than the one shipping with pd extended).
i wonder why this folder isn't included with pd extended? °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
and two problems with the examples: when i include vasp as library and add the path to the abstractions, the examples load well and don't produce any errors. but i still can't get convolve.pd and loudness.pd to work. with convolve, "start convolution" doesn't produce any output in buf_res (yes, the source buffers are loaded and the lengths are adjusted), "pd do" only outputs the sample count but buf_res always stays empty. and with loudness, i only get a "+" at the output.
thanks for helping fabbre
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther
King, Jr.
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hi Fabian,
hard to say why it isn't working. I'm suspecting a version conflict,
as some of the vasp objects (min, max, and maybe more) slightly
changed their behavior some years ago and i have no idea which
version is included in pd-extended.
I'm somehow working on a solution to all those problems, but since
i'm very busy it can still take some time to get my externals into pd-
extended.
gr~~~
Am 30.04.2008 um 20:42 schrieb Langsam Wieder:
hello list!
i finally tracked down why the vasp examples shipping with pd extended aren't working (the ones at \doc\examples\vasp\pd-ex). The examples use vasp abstractions like vasp.lower.pd or vasp.re.pd which aren't included with pd extended. (even the VASP-HELP.pd is missing). but they are included in the archives at http://grrrr.org/ext/vasp/ in the subfolder vasp\pd. (but funny that the vasp version there is older than the one shipping with pd extended).
i wonder why this folder isn't included with pd extended? °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
and two problems with the examples: when i include vasp as library and add the path to the abstractions, the examples load well and don't produce any errors. but i still can't get convolve.pd and loudness.pd to work. with convolve, "start convolution" doesn't produce any output in buf_res (yes, the source buffers are loaded and the lengths are adjusted), "pd do" only outputs the sample count but buf_res always stays empty. and with loudness, i only get a "+" at the output.
thanks for helping fabbre
PD-list@iem.at maili
Hey Thomas,
The version of the flext externals included in the last Pd-extended
release were the most recent on your site when that version was
released.
About this upcoming release, do you think you'll have the autoconf
stuff working at all? I'd like to include that. If not, I'll just
use the binaries on your site for the final release.
.hc
On May 2, 2008, at 12:21 AM, Thomas Grill wrote:
Hi Fabian, hard to say why it isn't working. I'm suspecting a version conflict, as some of the vasp objects (min, max, and maybe more) slightly changed their behavior some years ago and i have no idea which version is included in pd-extended. I'm somehow working on a solution to all those problems, but since i'm very busy it can still take some time to get my externals into pd- extended. gr~~~
Am 30.04.2008 um 20:42 schrieb Langsam Wieder:
hello list!
i finally tracked down why the vasp examples shipping with pd
extended aren't working (the ones at \doc\examples\vasp\pd-ex). The examples use vasp abstractions like vasp.lower.pd or vasp.re.pd which aren't included with pd extended. (even the VASP-HELP.pd is missing). but they are included in the archives at http://grrrr.org/ext/vasp/ in
the subfolder vasp\pd. (but funny that the vasp version there is older than the one shipping with pd extended).i wonder why this folder isn't included with pd extended? °°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
and two problems with the examples: when i include vasp as library and add the path to the abstractions, the examples load well and don't produce any errors. but i still
can't get convolve.pd and loudness.pd to work. with convolve, "start convolution" doesn't produce any output in buf_res (yes, the source buffers are loaded and the lengths are adjusted), "pd do" only
outputs the sample count but buf_res always stays empty. and with loudness, i only get a "+" at the output.thanks for helping fabbre
PD-list@iem.at maili
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
kill your television
Am 02.05.2008 um 13:55 schrieb Hans-Christoph Steiner:
About this upcoming release, do you think you'll have the autoconf
stuff working at all? I'd like to include that. If not, I'll just
use the binaries on your site for the final release.
Hi Hans-Christoph,
i'm sure the autoconf stuff will soon work for flext and the
externals which don't depend on external packages (pool, xsample,
vasp etc.) as least. It would be good to include that into the
autobuilds.
For an upcoming release of pd-extended i'd recommend taking the
binaries from my site though. The flext version i'm using here (and
for autoconf) hasn't been published for many months and isn't really
tested under linux (but it has been working for me flawlessly).
gr~~~
the vasp external I tried yesterday from your site, crashed my pd (latest autobuild). I then compiled my own version of vasp and that crashed, too. I guess I have some version conflicts (compiled against the wrong version?), so I am not sure if this error also appears on other systems and is really a bug. but maybe someone else on os x 10.5 can test this? thanks, marius.
Thomas Grill wrote:
Am 02.05.2008 um 13:55 schrieb Hans-Christoph Steiner:
About this upcoming release, do you think you'll have the autoconf
stuff working at all? I'd like to include that. If not, I'll just
use the binaries on your site for the final release.Hi Hans-Christoph, i'm sure the autoconf stuff will soon work for flext and the
externals which don't depend on external packages (pool, xsample,
vasp etc.) as least. It would be good to include that into the
autobuilds. For an upcoming release of pd-extended i'd recommend taking the
binaries from my site though. The flext version i'm using here (and
for autoconf) hasn't been published for many months and isn't really
tested under linux (but it has been working for me flawlessly).gr~~~
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Hi Marius,
if you use other flext-based externals at the same time, flext
version conflicts often lead to crashes.
That's one of main the reasons why i'm spending time on the
integration into pd-extended.
gr~~~
Am 02.05.2008 um 14:49 schrieb marius schebella:
the vasp external I tried yesterday from your site, crashed my pd
(latest autobuild). I then compiled my own version of vasp and that
crashed, too. I guess I have some version conflicts (compiled
against the wrong version?), so I am not sure if this error also
appears on other systems and is really a bug. but maybe someone
else on os x 10.5 can test this? thanks, marius.Thomas Grill wrote:
Am 02.05.2008 um 13:55 schrieb Hans-Christoph Steiner:
About this upcoming release, do you think you'll have the
autoconf stuff working at all? I'd like to include that. If
not, I'll just use the binaries on your site for the final release.Hi Hans-Christoph, i'm sure the autoconf stuff will soon work for flext and the
externals which don't depend on external packages (pool, xsample,
vasp etc.) as least. It would be good to include that into the
autobuilds. For an upcoming release of pd-extended i'd recommend taking the
binaries from my site though. The flext version i'm using here
(and for autoconf) hasn't been published for many months and
isn't really tested under linux (but it has been working for me
flawlessly). gr~~~ _______________________________________________ PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
-
Hans-Christoph Steiner -
Langsam Wieder -
marius schebella -
Thomas Grill