Hello,
I have a question about inlet/outlet order. Let’s say I have a subpatch which accepts and outputs 3 signal inlets/outlets:
in1~ in2~ in3~
\ | /
[ pd subpatch ]
/ |
out1~ out2~ out~3
How do I know which inlet within the subpatch would work with in1~, in2~ and so on? What would be the best practice to ensure correct inlet/outlet order?
Best regards, Bektur
Le 22/08/2014 18:08, Bektur a écrit :
Hello,
I have a question about inlet/outlet order. Let’s say I have a subpatch which accepts and outputs 3 signal inlets/outlets:
in1~ in2~ in3~ \ | / [ pd subpatch ] / |
out1~ out2~ out~3How do I know which inlet within the subpatch would work with in1~, in2~ and so on? What would be the best practice to ensure correct inlet/outlet order?
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
cheers c
Best regards, Bektur _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
Thanks!
I’m a bit confused here though, does the order in which I created inlets/outlets matter? Or are they sorted only by left/right location within the subpatch?
Best regards, Bektur
On Aug 22, 2014, at 10:31 PM, Cyrille Henry ch@chnry.net wrote:
Le 22/08/2014 18:08, Bektur a écrit :
Hello,
I have a question about inlet/outlet order. Let’s say I have a subpatch which accepts and outputs 3 signal inlets/outlets:
in1~ in2~ in3~ \ | / [ pd subpatch ] / |
out1~ out2~ out~3How do I know which inlet within the subpatch would work with in1~, in2~ and so on? What would be the best practice to ensure correct inlet/outlet order?
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
cheers c
Best regards, Bektur _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Le 22/08/2014 18:36, Bektur a écrit :
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
Thanks!
I’m a bit confused here though, does the order in which I created inlets/outlets matter?
no.
Or are they sorted only by left/right location within the subpatch? they are sort only by location
to experiment this : create a patch with a subpatch, connect subpatch inlet, and change geographical position of the inlet object. you'll see connection in the main patch to change side...
cheers c
Best regards, Bektur
On Aug 22, 2014, at 10:31 PM, Cyrille Henry ch@chnry.net wrote:
Le 22/08/2014 18:08, Bektur a écrit :
Hello,
I have a question about inlet/outlet order. Let’s say I have a subpatch which accepts and outputs 3 signal inlets/outlets:
in1~ in2~ in3~ \ | / [ pd subpatch ] / |
out1~ out2~ out~3How do I know which inlet within the subpatch would work with in1~, in2~ and so on? What would be the best practice to ensure correct inlet/outlet order?
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
cheers c
Best regards, Bektur _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
They are sorted based on location. My advice would be to pack all the arguments into a single message and then unpack them in the sub patch whenever possible.
best,
J
On Aug 22, 2014, at 12:36 PM, Bektur ph318@yandex.ru wrote:
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
Thanks!
I’m a bit confused here though, does the order in which I created inlets/outlets matter? Or are they sorted only by left/right location within the subpatch?
Best regards, Bektur
On Aug 22, 2014, at 10:31 PM, Cyrille Henry ch@chnry.net wrote:
Le 22/08/2014 18:08, Bektur a écrit :
Hello,
I have a question about inlet/outlet order. Let’s say I have a subpatch which accepts and outputs 3 signal inlets/outlets:
in1~ in2~ in3~ \ | / [ pd subpatch ] / |
out1~ out2~ out~3How do I know which inlet within the subpatch would work with in1~, in2~ and so on? What would be the best practice to ensure correct inlet/outlet order?
the leftmost inlet (outlet) is the 1, the right is 3, and the middle is 2. the best practive is to allign inle (outlet) from left to right.
cheers c
Best regards, Bektur _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
-
Bektur -
Cyrille Henry -
Jaime E Oliver