Hi, anyone interested in adding rewire support for pd? So far I read the
protocoll is free, though proprietary. (but I don't know much about it)
João Pais
Hi Joao
As i understand -
there is nothing you can do with rewire, that cannot be done with
jack, right ?
Please correct me if i'am wrong
Luigi
Am 23.Mai.09 um 23.Mai.09 MESZ 13:25 schrieb João Pais:
Hi, anyone interested in adding rewire support for pd? So far I read
the protocoll is free, though proprietary. (but I don't know much
about it)João Pais
-- Friedenstr. 58 10249 Berlin (Deutschland) Tel +49 30 42020091 | Mob +49 162 6843570 jmmmpais@googlemail.com | skype: jmmmpjmmmp
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
------->>>>>>>>>>----------------->>>>>>>>>>>>-----
Dipl-Toning.(FH) Luigi Rensinghoff mobil: 0177-5412191 skype: gigischinke luigi.rensinghoff@freenet.de
On Sat, May 23, 2009 at 7:33 AM, Luigi luigi.rensinghoff@freenet.de wrote:
there is nothing you can do with rewire, that cannot be done with jack, right ?
Please correct me if i'am wrong
Stream audio into ProTools.
Am 23.Mai.09 um 23.Mai.09 MESZ 15:40 schrieb chris clepper:
On Sat, May 23, 2009 at 7:33 AM, Luigi
luigi.rensinghoff@freenet.de wrote: there is nothing you can do with rewire, that cannot be done with
jack, right ?Please correct me if i'am wrong
Stream audio into ProTools.
I think it is possible. With "JackInsert". I did it once not sure,
maybe you need
I used that (http://www.fxpansion.com/index.php?page=15), but right....
Rewire would be cool......
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
------->>>>>>>>>>----------------->>>>>>>>>>>>-----
Dipl-Toning.(FH) Luigi Rensinghoff mobil: 0177-5412191 skype: gigischinke luigi.rensinghoff@freenet.de
(sorry Luigi, forgot to include the list) Luigi wrote:
Hi Joao
As i understand -
there is nothing you can do with rewire, that cannot be done with jack, right ?
Please correct me if i'am wrong
ReWire has transport syncing and is widely supported by most commercial software. I know there's jack-transport, but I don't know of anything that's not an open source linux-based app that uses it. Also, on OSX ReWire is more reliable than IAC for sending MIDI.
The major downside to ReWire, though, is that audio can only go one way: from slave to master. This has pissed me off more than once. It'd be nice if jack-transport support could spread beyond open source software, as it would likely make open source software more accessible.
.mmb
Luigi
Am 23.Mai.09 um 23.Mai.09 MESZ 13:25 schrieb João Pais:
Hi, anyone interested in adding rewire support for pd? So far I read the protocoll is free, though proprietary. (but I don't know much about it)
João Pais
-- Friedenstr. 58 10249 Berlin (Deutschland) Tel +49 30 42020091 | Mob +49 162 6843570 jmmmpais@googlemail.com | skype: jmmmpjmmmp
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
------->>>>>>>>>>----------------->>>>>>>>>>>>-----
Dipl-Toning.(FH) Luigi Rensinghoff mobil: 0177-5412191 skype: gigischinke luigi.rensinghoff@freenet.de
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Funny you should say - here's an example of Jack transport being
incorporated into a closed source product (Linux only?!)
http://createdigitalmusic.com/2009/05/26/renoise-21-now-with-mac-pc-rewire-p...
On 23 May 2009, at 15:32, Mike Moser-Booth wrote:
(sorry Luigi, forgot to include the list) Luigi wrote:
Hi Joao
As i understand -
there is nothing you can do with rewire, that cannot be done with
jack, right ?Please correct me if i'am wrong
ReWire has transport syncing and is widely supported by most
commercial software. I know there's jack-transport, but I don't know of anything that's not an open source linux-based app that uses it. Also, on OSX ReWire is more reliable than IAC for sending MIDI.The major downside to ReWire, though, is that audio can only go one
way: from slave to master. This has pissed me off more than once. It'd be nice if jack-transport support could spread beyond open source
software, as it would likely make open source software more accessible..mmb
Luigi
Am 23.Mai.09 um 23.Mai.09 MESZ 13:25 schrieb João Pais:
Hi, anyone interested in adding rewire support for pd? So far I
read the protocoll is free, though proprietary. (but I don't know
much about it)João Pais
-- Friedenstr. 58 10249 Berlin (Deutschland) Tel +49 30 42020091 | Mob +49 162 6843570 jmmmpais@googlemail.com | skype: jmmmpjmmmp
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
------->>>>>>>>>>----------------->>>>>>>>>>>>-----
Dipl-Toning.(FH) Luigi Rensinghoff mobil: 0177-5412191 skype: gigischinke luigi.rensinghoff@freenet.de
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Uh, yeah. I should have said "open source/linux-based." I actually checked Renoise before I posted, as I though that might be the one that did have jack transport. Of course, jack is only available on the linux version.
.mmb
Si Mills wrote:
Funny you should say - here's an example of Jack transport being incorporated into a closed source product (Linux only?!)
http://createdigitalmusic.com/2009/05/26/renoise-21-now-with-mac-pc-rewire-p...
On 23 May 2009, at 15:32, Mike Moser-Booth wrote:
(sorry Luigi, forgot to include the list) Luigi wrote:
Hi Joao
As i understand -
there is nothing you can do with rewire, that cannot be done with jack, right ?
Please correct me if i'am wrong
ReWire has transport syncing and is widely supported by most commercial software. I know there's jack-transport, but I don't know of anything that's not an open source linux-based app that uses it. Also, on OSX ReWire is more reliable than IAC for sending MIDI.
The major downside to ReWire, though, is that audio can only go one way: from slave to master. This has pissed me off more than once. It'd be nice if jack-transport support could spread beyond open source software, as it would likely make open source software more accessible.
.mmb
Luigi
Am 23.Mai.09 um 23.Mai.09 MESZ 13:25 schrieb João Pais:
Hi, anyone interested in adding rewire support for pd? So far I read the protocoll is free, though proprietary. (but I don't know much about it)
João Pais
-- Friedenstr. 58 10249 Berlin (Deutschland) Tel +49 30 42020091 | Mob +49 162 6843570 jmmmpais@googlemail.com | skype: jmmmpjmmmp
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
------->>>>>>>>>>----------------->>>>>>>>>>>>-----
Dipl-Toning.(FH) Luigi Rensinghoff mobil: 0177-5412191 skype: gigischinke luigi.rensinghoff@freenet.de
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
related read:
http://audacityteam.org/wiki/index.php?title=Features_We_Can%27t_Implement
Am 23.05.2009 um 13:25 schrieb João Pais:
Hi, anyone interested in adding rewire support for pd? So far I read
the protocoll is free, though proprietary. (but I don't know much
about it)João Pais
-
chris clepper -
João Pais -
Luigi -
Max -
Mike Moser-Booth -
Ray Rashif -
Si Mills