I've started working on segmented patch cords. No promises that it will work, but I think I've gotten past the "proof of concept" stage (still need to figure out cut/paste and loading/saving). So before I go any further, I figured I'd ask and see if anyone out there is also working on this.
Hmm, I think this is premature... I'm hoping to make some changes in the way coordinates work that might make this hard to maintain. Also, I've gone and changed a lot of code since 0.34, which I'll put out if I can ever get it working again...
cheers Miller
On Sat, Dec 29, 2001 at 09:41:05PM -0500, Joseph A. Sarlo wrote:
I've started working on segmented patch cords. No promises that it will work, but I think I've gotten past the "proof of concept" stage (still need to figure out cut/paste and loading/saving). So before I go any further, I figured I'd ask and see if anyone out there is also working on this.
-- ______________________________ | | Joseph A. Sarlo | | jsarlo@mambo.peabody.jhu.edu |______________________________
Hi folks---not sure if the list is down of course the weekend i decide to update..:-) it's all mik's fault for teasing me about running 27
well i was able to get 32 and 31 running with stk and either ggee or ggext with the path to the /signal and experimentals working.
they both listed dev/dsp in read/write mode the last fully working version with MIDI that i have is pd.0-27 which states MIDILIB found ...midi00 and midi 01 but IT only opens dsp as read only
34 will not open /dev/dsp in read/write mode it will open 1 midi in port
everything else seems fine
On th eWindows machine running pd gives a MMSYSTEM out of range for midiinopen
what is the command to listedevices... there are so many flags now that half of them pass by on the ms-dos screen and i cannot find them listed anywhere
ALSO there is stklib.a missing from yves's stkdrone and sitar instrs.
please help Pat
Pat Pagano, Director South East Just Intonation Society http://www.screwmusicforever.com/SHREESWIFT/