BTW [creb/fdn~] is not working either anymore. I havn’t found any workaraound so far. Any ideas besides delaying turning on DSP later?

I’m also having problems with [delwrite~] / [delread~] working correctly. Again: delaying turning DSP on doesn’t help. Here I’m getting sound but it is distorted. Could be that the delay times are at minimum. But I haven’t heard any other cure that to delay “DSP 1”. Again – only with “-nogui”.

 

 


Von: Ingo Scherzinger [mailto:ingo@miamiwave.com]
Gesendet: Donnerstag, 6.
Mai 2010 11:38
An: 'Pedro Lopes'; 'Ingo Scherzinger'
Cc: 'pd-list'
Betreff: AW: [PD] [susloop~] not working with -nogui on Ubuntu 10.04

 

Actually, DSP 1 is even delayed several seconds to allow loading of the samples a little bit faster. The same patch is working with the older Linux version.

Anyway, never mind, I already took the time to create an abstraction with [loop~] and [samphold~] that takes the same parameters (for my purpose) as [susloop~].

Ingo

 

 

Long shot.. cause you probably already tryed this:

 

- Isn't that that typical -nogui issue? (the delayed one...) Just put a delay of about 100ms between your loadbang and the activation of the DSP 1; (the sound computation trigger). The thing is in -nogui sometimes stuff boots too fast =P

 

On Wed, May 5, 2010 at 9:15 AM, Ingo Scherzinger <ingo@miamiwave.com> wrote:

I’m having a strange problem with [susloop~].

[susloop~] does not produce any sound since I’ve changed to Ubuntu 10.04 with the –nogui flag. With the graphics turned on there is no problem at all.

I had this problem before but didn’t trace it down which was the reason why I stayed with Ubuntu 7.10 until now. Now I boiled it down to where I found out that the problem is definitively [susloop~]. I used the same sound path and simply “bypassed” [susloop~] by feeding some other signal into [tabread4~] and I got sound again. Garbled – but sound!

Has anybody else experienced this problem? Does anybody have a workaround (exept for using [loop~] which doesn’t accept the same data format)?

I’m using Pd-0.42.5-extended-ubuntu-lucid-i386 dated 03-May-2010.

Thank you, Ingo
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
--
Pedro Lopes
contacto:
jazz@radiozero.pt
website:
http://web.ist.utl.pt/Pedro.Lopes