You can do up to 6 or even 8 analog inputs, so you can handle that
many solar panels with Pduino/Firmata. For the ping sensors, the EZ1
and friends would be the best bet, then you can use 6/8 of those,
since they are just analog signals.
As for the PING sensors, you can know use the alpha Firmata library
in Arduino, and write an arduino firmware which handles the PING
sensors, and communicates using the Firmata protocol.
.hc
On Dec 24, 2007, at 4:47 AM, Marko Timlin wrote:
Hi Marius, you are absolutely right! After writing code for the arduino I can
use the Ping sensor without any problems within PD (using the
PD_inputs_to_PD patch). But that is not my problem. My problem is that if I work like that,
I have to change the arduino code all the time I change my sensor
setup. Like for instance: First I write arduino code for 3 Ping
sensors and 3 solar panles...but then I want to use 4 Ping sensors
with let's say 3 LEds. It would be great if I could do all that using only the arduino
patch in PD, without writing new code for arduino all the time. Of
course after uploading the Pd_firmware onto the arduino-board. Any idea how? And at the moment I would like to work with 8 Ping
sensors :-) and 5 solar panels at the same time.Best, Marko
hmm, I think arduino can handle the ping range finder. but you need to write your specific code. use a code that you find online (the routine is something like:
turn pin to outlet, set pin high, wait some milliseconds, set pin low, turn pin to inlet, measure the time until you receive the echo...) and then send the value to pd via serial port (115200). then measure next value. I think, you should be able to send at least 20 values per second, but that is a guess. do you need more info for the arduino code? how many sensors do you
have? marius.it is
Marko Timlin wrote:
Moi, does anybody know, if it is possible to control the Ping (ultrasonic range
finder)sensor using only Pduino (first uploading Pd-firmware to the
arduino, and then using the "arduino" pure data patch?). It doesn't work for
me at the moment.If I write my own ping-sensor-patch for arduino and then use the
PD_inputs_to_PD patch it works fine.
But I'd like to use several different sensors and it would
therefore be mucheasier to just control all of them with Pduino and not writing new
code for arduino all the time. Well, guess this was the original idea of
Pduino anyways :-)MArko
PD-list@iem.at mailing list UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
The arc of history bends towards justice. - Dr. Martin Luther
King, Jr.