Hi Derek and Johnny,
I remove the lrt but the problem now is -ljack:
console:
-ldl -lm -lpthread ld: can't locate file for: -ljack make: *** [../bin/pd] Error 1
I think is a good idea if Johnny could post the modded makefile. In the makefile I don't see any path to framework/jack.
Otherwise the Johnny's build work fine (http://www.meskalina.it/ elementicaotici/dev/downloads/pd-0.37-0-Jack.zip).
Thanks
Jose
Quoting Johnny - elementicaotici johnny@lato-b.com:
On Jan 8, 2004, at 16:34, derek holzer wrote:
Jose,
One thing you could try:
Open your Makefile and check to see that all the paths are correct.
You should see some notes that ask things like "Where is your m_pd.h?"
and such things. Do a manual search for anything that is listed as an
"include" and see if it is the correct path.Beyond that, I am not sure. This may be the first documented case of
compiling PD OSX with Jack. Something to tell your grandkids about...
;-)No... You must made some little mods in the makefile and all will
work.. I've already done this... lrt is a linux library and you must remove it from the makefile, and
also you must remove a file. btw you can download pd 0.37 compiled here:
http://www.meskalina.it/elementicaotici/dev/downloads/pd-0.37-0- Jack.zipJohnny from jackosx ...
best, D.
jmfernandez1@free.fr wrote:
I try to build pd with jack support. The ./configure --enable-jack
seems to work but when I run the "make" in the console I have:<snip!>
ld: can't locate file for: -lrt make: *** [../bin/pd] Error 1
-- derek holzer ::: http://www.umatic.nl ---Oblique Strategy # 91: "Infinitesimal gradations"
PD-list mailing list PD-list@iem.at http://iem.at/cgi-bin/mailman/listinfo/pd-list
PD-list mailing list PD-list@iem.at http://iem.at/cgi-bin/mailman/listinfo/pd-list