hey

I've put together a little abstraction (attached) to demonstrate the defaulting I mentioned earlier. Either give it no arguments for the range object to output 0 to 127 or set your top and bottom range with this. Unfortunately without arguments the fixed variable boxes stuck on zero, I've added some conditional logic so this will work unless you set the second argument as 0. Then it will default to 127. Either way, hope this helps. 

Andrew


Date: Mon, 20 Sep 2010 14:54:58 +0200
From: rafael.raccuia@blindekinder.com
To: jbturgid@hotmail.com
CC: pboivin@gmail.com; pd-list@iem.at
Subject: Re: [PD] midi learn

hi,
I also patched a midi learn abstraction... then I found this discussion and replaced all [select] by [==]... Thank's :-)
Hope you'll enjoy this one: both cc and channel values are saved in an external message box with a [set( message in the abstraction itself... so no need to re-learn on each session. Two arguments to scale your 0-127: can be negative numbers or reversed scale.
Maybe somebody can help me with that: I didn't found a way to set 0-127 as default. So the two arguments are obligatory...
cheers
raf

Andrew Faraday a écrit :
I actually prefer your solution to mine, the [==] boxes are exactly what I was looking for and would have saved quite a lot of logic. Also I didn't think of [t a a a] which would have saved quite a lot of time. Will have to keep an eye on these for future work. 

I've got you in one place, tho. you can use [*] for conditional logic (with a [bang]) to activate when the right inlet changes. instead of multiple spigots. The logic goes, if all of them are 1, the result is 1. If any are 0, the result is zero. Useful stuff. Although more useful when you're working in audio, usually with [expr~] and the inlets of [*~] are summing. 

I've gone on a bit of a tangent here. Always interested in approaches to logic in pd, tho. 

Andrew


> Date: Wed, 4 Aug 2010 13:20:51 -0400
> Subject: Re: [PD] midi learn
> From: pboivin@gmail.com
> To: jbturgid@hotmail.com
> CC: pd-list@iem.at
>
> Hi Andrew,
>
> I made something similar a couple of weeks ago, as I needed a quick
> way to map midi controllers. It's only for CC though...
>
>
> Patrick
>
>
> On Tue, Aug 3, 2010 at 1:09 PM, Andrew Faraday <jbturgid@hotmail.com> wrote:
> > Hey All,
> >
> > I don't know if anyone's done this but I've attached a midi learn
> > abstraction I've been working on. The logic's a bit messy but I got it
> > working in the end.
> >
> > Basically from banging the learn patch it listens to the next signal, either
> > a note or a control signal, and then filters out only the velocity or
> > control value from that. (I've started taking an interest in controlling
> > patches with the velocity, as opposed to the note number).
> >
> > Let me know what you think, and if you know of anything similar being done.
> >
> > Cheers
> >
> > Andrew
> >
> > _______________________________________________
> > Pd-list@iem.at mailing list
> > UNSUBSCRIBE and account-management ->
> > http://lists.puredata.info/listinfo/pd-list
> >
> >

_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list