I figured that would be what i would need to do run pd with -nogui and arduino stuff that Hans wrote for the potentiometer control a simple toggle on the faceplate that switches between maybe 5 patches that are unavailable in traditional analogia
1.) Phase Locking vocoder 2.) Granular synthesis 3.) FFT of some sort 4.) Sample and Hold, still need a patch that takes in a live osc~ 5.) a waveform patch that loads a simple osc~/phasor for RIngMod/Am/FM etc...
The other issue is that the raspi that i have does NOT have a line in, only a line out for sound i bought a little USB soundblaster card for that to see if i can get audio in to a ADC~
pp
Patrick Pagano B.S, M.F.A Audio and Projection Design Faculty Digital Worlds Institute University of Florida, USA (352)294-2020
From: Pd-list pd-list-bounces@mail.iem.at on behalf of Jonathan Wilkes via Pd-list pd-list@mail.iem.at Sent: Monday, April 20, 2015 5:37 PM To: pd-list@mail.iem.at Subject: Re: [PD] [Bulk] pd in a eurorack modular system
On 04/19/2015 08:58 AM, martin brinkmann wrote:
On 17/04/15 23:59, katja wrote:
Boot time for Raspbian varies with sd card class as well, but indeed it is in the order of half a minute even for RPi 2 with class 10 card. Maybe they've used a different OS for Nebulae, or programmed on bare metal?
the boot-time very much depends on the os. raspbian takes at least 30 seconds from power on to login promt. i have just installed arch on an old and rather slow sd card, and it took about 10 seconds until the login prompt. and there is a video on youtube, where an rpi boots in less than 5 secondes into some retro game emu.
Has anyone tried Linux From Scratch for the Raspberry Pi? In that case you could load the bare minimum needed for Pd in -nogui mode, which should give you the minimum system necessary.
-Jonathan
bis denn! martin
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list