A friend of mine (guitarist) loves that pedal, quoting: - "really study and heavy".

On Tue, Jun 8, 2010 at 11:25 PM, Jaime Oliver <jaime.oliver2@gmail.com> wrote:
Well, I have ordered the arduinos, but should get to them in about a week. I think I'll go with one of these:

http://www.midi-store.com/Moog-Moogerfooger-EP-2-Expression-pedal-p-16985.html


On Tue, Jun 8, 2010 at 3:02 PM, hghoyer <mail@hghoyer.de> wrote:
hmm, You want to read out some analog Voltage between 0 and 5 Volts and then takes this value out with a Midi Pitch Bend Message? Great Idea... I am very interessted in this patch... In 2 Weeks I will to a workshop. Ten i will discuss these Idea... If anyone hat such an Arduino - Patch, i ´m very interessted to get these!1

Hans

2010/6/8 Pedro Lopes <pedro.lopes@ist.utl.pt>

Nice idea, I didn't realize that. So I went and checked the MIDI 1.0 implementation chart[1] its a cool trick, it gives another byte of information apparently as stated here[2]:


Pitch Bend    MSB       +          LSB

Always learning...thanks :) 


On Tue, Jun 8, 2010 at 10:47 PM, Jaime Oliver <jaime.oliver2@gmail.com> wrote:
Or you can use an arduino and send midi messages through pitch-bend or one of those high-res midi messages...

J


On Tue, Jun 8, 2010 at 2:37 PM, Pedro Lopes <pedro.lopes@ist.utl.pt> wrote:
>Actually, an arduino is more than enough for what you want. you can have data from 0 to 1023, that is >quite a lot, plus, you can use it directly on puredta using pduino, no need for OSC.
I second that, arduino will do! 
But if you want to built an "pd-independent" device, you can use OSC in arduino - although much harder than simply reading values with pduino - some guys already posted code for sending OSC messages from arduino devices [1], so then you can plug it to whatever you want: pd, ardour, osc-to-midi apps, processing, supercollider :D

[1] http://recotana.com/recotanablog/?page_id=222 (this ships the messages from ethernet cable on the arduino's ethernet shield, but there might be more similar projects that ship from usb)


On Tue, Jun 8, 2010 at 10:24 PM, Ricardo Lameiro <ricardolameiro@gmail.com> wrote:
Actually, an arduino is more than enough for what you want. you can have data from 0 to 1023, that is quite a lot, plus, you can use it directly on puredta using pduino, no need for OSC.


2010/6/8 Pierre Massat <pimassat@gmail.com>
A gamepad would definitely be LESS precise as each potentiometer will map data between 0 and 255. But i've never found this to be a problem.

Pierre

2010/6/8 Pierre Massat <pimassat@gmail.com>
I guess it could, only Arduino is more expensive i suppose. I'll try to provide you with some pictures sometime soon.

Pierre

2010/6/8 Achim Bloch <achim.bloch@yahoo.fr>

Hi Pierre
could you provide more details on how you built your pedal? Could'nt the gamepad be replaced with an Arduino?
Thanks,
Cyrill


--- En date de : Mar 8.6.10, Pierre Massat <pimassat@gmail.com> a écrit :

De: Pierre Massat <pimassat@gmail.com>
Objet: Re: [PD] Looking for a pedal controller
À: "Achim Bloch" <achim.bloch@yahoo.fr>, "pd-list" <pd-list@iem.at>
Date: Mardi 8 juin 2010, 7h25


Hi Achim,
You'll have no latency problems with a USB pedal in Linux using the [hid] object. No "noticeable" latency at least.
There are two problems arising when attempting to built a USB pedal : first you need to actually make the pedal (the traditional cry baby design is probably the easiest way to go), then you need to connect it to a good usb gamepad. I insist on the "good" here because it is essential if you want to have a decent expression pedal. The best would be to test the gamepad before buying it and turning it into a pedal.

Pierre


2010/6/7 Achim Bloch <achim.bloch@yahoo.fr>
Hi Pierre
and thanx for your answer.
I am looking for an expression foot controller. Something working somehow like a wah-wah pedal. But I am unsure if I need a device with an OSC dedicated driver, or if any USB pedal would do the job. What I primarily expect from this device is accuracy, and low-latency.
Do you have any examples (photographs, audio samples) of the device you made? I am curious!
Achim

--- En date de : Dim 6.6.10, Pierre Massat <pimassat@gmail.com> a écrit :

De: Pierre Massat <pimassat@gmail.com>
Objet: Re: [PD] Looking for a pedal controller
À: "Achim Bloch" <achim.bloch@yahoo.fr>
Date: Dimanche 6 juin 2010, 20h40


Hi Achim,
I've built one myself, based on a usb gamepad. I can give you some tips. But you'll have to be more precise about what you really need (expression pedal or just switches?)

Pierre

2010/6/6 Achim Bloch <achim.bloch@yahoo.fr>
Hi listees
I'm looking for a pedal controller that is accurate enough to send OSC messages to pd, in order to control some effect patches for my guitar.
Can anyone help me in finding a good one, maybe providing a perqsonal experience feedback?
Thanks in advance,
Achim



_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list




_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list






_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list




--
Fagote / Contrafagote
Bassoon / Contra-bassoon
http://myspace.com/ricardolameiro

_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list




--

_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list




--
Jaime E Oliver LR

www.jaimeoliver.pe

858 750 0924 (cel)
858 202 1522 (home)
9168 Regents Rd. Apt. G
La Jolla, CA 92037
USA



--
Pedro Lopes
contacto: jazz@radiozero.pt
website: http://web.ist.utl.pt/Pedro.Lopes

_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list



_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list




--
Jaime E Oliver LR

www.jaimeoliver.pe

858 750 0924 (cel)
858 202 1522 (home)
9168 Regents Rd. Apt. G
La Jolla, CA 92037
USA



--
Pedro Lopes
contacto: jazz@radiozero.pt
website: http://web.ist.utl.pt/Pedro.Lopes