Hi, I've been looking the object again. I didn't remember, but there is a default option that sets the num. of bytes of data to 0. So that is the cause that there is no data in outlet 10. If you send a message [data x] where x is the max number of bytes of data to output. (you can see it in help files)
By default is 0 so the payload out is off, if data > 0 the payload out is on, BUT it can lock pd. The solution is to increase the delay between captures (default is 100ms). To increase the delay time: message [timeout ms] where ms is the num. of miliseconds between captures.
I hope it will solve your problem!!
2015-12-13 18:11 GMT+01:00 Benjamin ~ b01 benjah@free.fr:
Le 13/12/2015 13:11, Olivier Baudu a écrit :
Le 13/12/2015 11:39, Jordi Sala a écrit :
Hi,
I've compiled it again. I can see the problem with outlet 10 (Data). I'll check it during next days!
great if you can solve it, ++thanks for your work/time
b
Thanks a lot!!
Thanks a lot to you ! :-D
°1
2015-12-13 4:07 GMT+01:00 Olivier Baudu <01ivier@labomedia.net mailto:01ivier@labomedia.net>:
Le 13/12/2015 03:23, Jordi Sala a écrit : > Hi, > > I did pdpcap. It is based on libpcap (so it's like tcpdump). Whatis the
> problem of packet content? The data format? I can try to modifyit to
> get the content of packet correctly. (I'm not have a lot of time,but
> I'll try it). > Hi Jordi, First of all, thank you for your work. :-) Then, the problem with the packet content is that there is no content... :-/ Every outlets are working fine except the 10th : "Data bytes in hexadecimal (symbol)" I'm on an Ubuntu 14.04 with Pd 0.45.4 I'm quite a noob in compilation and I didn't know exactly whichpacket I
need to install so I did this : sudo apt-get install libpcap-dev libpcap0.8 libpcap0.8-dev and make Did I miss something ? Thanks for your help. °1ivier > > > 2015-12-13 2:56 GMT+01:00 Olivier Baudu <01ivier@labomedia.net> <mailto:01ivier@labomedia.net <mailto:01ivier@labomedia.net>>>: > > @IOhannes: :-D You're right... I should be more specific...sorry...
> A tcpdump-like tool is what I'm looking for... > > Le 12/12/2015 14:17, Benjamin ~ b01 a écrit : > > hello, > > > > the files are still available on this page : > >http://musa.poperbu.net/index.php/puredata-mainmenu-50#pdpcap
> > or directly http://musa.poperbu.net/files/pcap0.0.5.tar.gz > > I tired to compile it several times mainly on ubuntu &debian, it works
> > but I never managed to get the content of the packets inhex or ascii
> > format whereas I have the other infos > > so I switched to shell and tcpdump > >http://wiki.labomedia.org/index.php/Scripts_bash_linux_audiovisuel#Network_s...
> > let me know if it works for you > > > > Thanks a lot Benjamin. > Your wiki looks full of resources... :-p > > Well, as you said, the compilation was easy (for Ubuntu), andit works
> fine... > ... except for the data. :-/ > > So I tried tcpdump with [shell] as root... > And it works too... (until it freezes) > Now, I have to find a way to use the data... (before itfreezes) :-p
> > Thanks, again... > > (have you already ask Poperbu about the [tcpcap_device] issue?
> @Nicolas Montgermont : If you're in the corner, does the OSXversion
> give the data as expected ? Thank you. > ) > > °1ivier > > > ++ > > b > > > > Le 10/12/2015 14:45, IOhannes m zmoelnig a écrit : > >> On 2015-12-10 14:41, Olivier Baudu wrote: > >>> Does anyone have a version of the project somewhere ? > >>> Or, an other "pd native" way to sniff network ? > >> i don't. > >> > >> but you might be more specific on which level/layer youwant to sniff.
> >> (in a way a trivial [netreceive -b -u 7000] is a networksniffer that
> >> will sniff for all UDP/broadcast traffic on port 7000 ;-)) > >> > >> fgmasdr > >> IOhannes > >> > >> > >> > >> _______________________________________________ > >> Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at> <mailto:Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at>>mailing list
> >> UNSUBSCRIBE and account-management ->http://lists.puredata.info/listinfo/pd-list
> > > > > > _______________________________________________ > > Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at> <mailto:Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at>>mailing list
> > UNSUBSCRIBE and account-management ->http://lists.puredata.info/listinfo/pd-list
> > > > -- > "On ne peut pas vivre dans un monde où l'on croit quel'élégance exquise
> du plumage de la pintade est inutile. Ceci est tout à fait àpart. J'ai
> eu envie de le dire, je l'ai dit." Jean Giono, Un roi sans > divertissement. > > _______________________________________________ > Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at> <mailto:Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at>>mailing list
> UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > > > > -- > Jordi Sala > http://musa.poperbu.net > > > _______________________________________________ > Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at> mailing list > UNSUBSCRIBE and account-management ->http://lists.puredata.info/listinfo/pd-list
> -- "On ne peut pas vivre dans un monde où l'on croit que l'éléganceexquise
du plumage de la pintade est inutile. Ceci est tout à fait à part.J'ai
eu envie de le dire, je l'ai dit." Jean Giono, Un roi sans divertissement. _______________________________________________ Pd-list@lists.iem.at <mailto:Pd-list@lists.iem.at> mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list-- Jordi Sala http://musa.poperbu.net
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list