I'm thinking this one XL-MaxSonar - WRM1 look forward to checking tutorials. What's your github address?
Cheers,
Julian
On 12 March 2013 14:35, Alexandre Saunier saunier.alexandre@yahoo.comwrote:
'Power filters' are simple RC filters you can solder directly on the sensor, they help eliminating electric noise. Since the analog output of the sensor depends on the voltage with which it is fed, the cleaner the supply voltage, the better the analog output. I don't know which sensor you're gonna us, but assuming it works like the MB1000 or MB1200, you will find a lot of useful tips inside the datasheet and in the tutorial page.
I'll start cleaning up my mess and a few short tutorials should be on my github by this evening.
Best, Alex
*De :* Julian Brooks jbeezez@gmail.com **
Hi Alex,
Many thanks for the info.
What are 'power filters'?
Yes on RPi, so tutorials would be very helpful.
Best wishes,
Julian
On 12 March 2013 13:32, Alexandre Saunier saunier.alexandre@yahoo.comwrote:
Hi Julian,
As for the URF, I can't give you any infos but I've been using Maxbotix's indoor sensors a few times.
One thing you really want to take into acount is the fact that sensors interract with each others, you therefore need to chain them properly. You might want to take a look at power filters too. Maxbotix's tutorial page has been quite useful to me so far.
As to get the infos to pd, I've been using these sensors with a raspberry pi. My option has been to collect the data from the RPi's GPIO using python and then send them to pd using OSC. I'm starting to write small tutorials explaining what I've been through, if you use the RPi too I'd be happy to point them to you.
Have fun, Alex
*De :* Julian Brooks jbeezez@gmail.com *À :* PD List pd-list@iem.at *Envoyé le :* Mardi 12 mars 2013 13h58 *Objet :* [PD] Ultrasonic Range Finder
Hi,
I'm after some advice:
For an installation piece I'd like to do I'm investigating range finder sensors (for outdoors).
Has anyone experience of the Maxbotic URF's and any tips they'd like to share for getting the data into Pd?
Cheers,
Julian
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list