That's how i performed the compilation - the process, including the separation of the results into -bin, -dev and -doc packages should be made reproducible with some scripts. That is the wish of the picore repo keepers.
best, Thomas

Am 07.03.2018 um 15:48 schrieb Dan Wilcox <danomatika@gmail.com>:

It should work with makefile.gnu in src. We still need to update the autotools setup to support the "build in place" approach beyond the halfway symlinking it does now, so I wouldn't use the configure script et al. in the package for this yet.

On Mar 7, 2018, at 12:34 PM, Thomas Grill <gr@grrrr.org> wrote:

Ah, i forgot... it would be cool for the future to have a buildable package with source included and working build scripts.
Don't know when/whether i have the time for that, so if someone wants to stand in, please go for it.
best, Thomas

Am 07.03.2018 um 09:35 schrieb Thomas Grill <gr@grrrr.org>:

Dear all,
puredata-0.48-1 is now in the PiCore repository! That's a binary build for tinycorelinux on Raspberry Pi.
http://repo.tinycorelinux.net/9.x/armv6/tcz/
best, Thomas

--
Thomas Grill
http://grrrr.org



Am 16.02.2018 um 23:58 schrieb Thomas Grill <gr@grrrr.org>:

Dear all,
i have just submitted picore extension packages for pd-0.48-1 to the respective repertory.
I hope i have met all the requirements, so that the package can become canonical very soon.

If you want to install them in the meantime, please grab the files from http://l.grrrr.org/puredata_tcz
The manual installation procedure is the following:

-------

Copy the package files from your local machine to the tinycore:
scp $SOURCEDIR/puredata.tcz{,.dep,.md5.txt} tc@$TINYCOREIP:/etc/sysconfig/tcedir/optional/

then logon to the tinycore:
ssh tc@$TINYCOREIP
chown tc.staff /etc/sysconfig/tcedir/optional/puredata.tcz*
chmod 664 /etc/sysconfig/tcedir/optional/puredata.tcz*
echo puredata.tcz >> /etc/sysconfig/tcedir/onboot.lst

and reboot the tinycore

-------

These are just the binary files needed to run pd.
The doc/help files are in the puredata-doc.tcz package, the development header m_pd.h is in puredata-dev.tcz .
To install those permanently, follow the procedure from above with changed package names.

best, Thomas

--
Thomas Grill
http://grrrr.org



Am 15.02.2018 um 04:22 schrieb Dan Wilcox <danomatika@gmail.com>:

Sweet, good to know. I think it would be good if the Pd distribution tarball was built this way so you don't need autoconf/autogen installed to build.

On Feb 15, 2018, at 4:20 AM, Chris McCormick <chris@mccormick.cx> wrote:

Hi Dan,

On 07/02/18 16:50, Dan Wilcox wrote:
Looks like an issue with autoconf of your system. If we used a dist tarball with pregenerated configure scripts, this probably wouldn't be an issue since then autoconf and automaker are not needed, just gcc and make.
I followed your instructions to build the dist tarball:

./autogen.sh
./configure
make dist

Then copied the tarball pd-0.48.1.tgz to the Raspberry Pi running Tiny Core Linux and ran:

./configure
make

The resulting binary successfully runs a test tone Pd patch and outputs a sine wave to the audio jack.

Hope this helps!

Cheers,

Chris.

--
http://mccormick.cx/


_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list