Hi Jesse, Take this advise very loosely as I have no experience with DMX, I only studied the Art-Net protocol once for a friend that needed Lan connection with its hardware. Try updating @ 20 or 21 ms. [metro 21] If I remember correctly that is what it takes 1 full DMX cycle.
Try it. Mensaje telepatico asistido por maquinas.
From: jmejia@anestheticaudio.com Date: Sat, 11 Jun 2016 13:24:18 -0700 To: Pd-list@lists.iem.at Subject: [PD] uDMX hanging/locking up
Hi list, I’m using a uDMX device (http://www.anyma.ch/research/udmx/) and having some trouble with it. I’m running Pd 0.47 I’m sending a list (read out from a continually updated table) with 144 entries (for 144 DMX channels) every 50ms dispatched via [metro 50] After a few minutes of ‘inactivity' (meaning sending a list with 144 0’s every 50ms) - the uDMX interface activity light goes dark - and I can’t get anything out of my patch to it anymore. Re-instantiating the uDMX external object brings it back to life. Has anyone had trouble keeping these things alive? Or maybe I’m updating it too fast - but I get nicer light fades at a fast framerate (while it’s working). Or maybe there’s a better way to control this thing? Ultimately it’s for a an interactive/dynamic patch where any/all of the 144 channels will be triggered at any given time.. so traffic control as a table gets constantly updated seemed like a good approach. Thanks! -Jesse _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list