Hiya,
Could you test with xawtv to see if you get video from the card? The blue screen is output by the card if there is no video input going into it so maybe the problem is with the camera? Or do you want tv input into it? Again, live troubleshooting for something like this so try the irc channel.
Cheers,
Alexandre
On Friday 06 June 2008 10:34:14 brandt@subnet.at wrote:
Hi thank you. I like that 4in one. But as i am in austie, shipping takes to long time.
anyway: I´ve a haupage Wintv, the driver are loaded with modprobe and lsmod shows it correct loaded. if i switch through the channels, it just shows me a blue screen in pdp, and tells me that the frequency is not correct. Also Gem finds it, the same output, in fact nothing.
Thank you again der.brandt
On Thursday 05 June 2008 15:22:03 Ctrl Alt Back wrote:
On Thu, Jun 05, 2008 at 08:59:59PM +0200, brandt@subnet.at wrote:
thank you, sincerely
I got one but this does not work, can't get any picture. gem and PDP
find
it but dispkay no picture. and i willing to spent some money, in order
to
get it work
you have any further details ? like : what card you got what you are trying with it ? driver loaded ? try to run tvtime first on your card, go to menu > input configuration, select source composite 1, if it works, will work on Pd as well.
Good advice, these cards are susceptible to electrostatic shock (I have lost a couple over the years). I have had success with xawtv to test if video input worked.
You could also try with gridflow. Do 'lsmod' and see if you have the 'bttv' driver loaded. You should also have a device /dev/video0 and make sure you have the permissions ok... Try the irc channel if you want live troubleshooting help (irc.freenode.net, channel #dataflow).
Cheers,
Alexandre
Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list