Too tired to give you much help but here are a few pointers.
If you are getting sound out through the test patch then you ARE talking to your sound card. You need to do the midi explicitly - it defaults to disabled.
Set up a batch file to run pd - here is mine - note cut between the lines and copy into a file called pd.bat (you can use notepad for this). Note - you will have to change paths and things and you will probably not have all the libraries I am using...
_______________cut below here @echo off set VST_PATH=d:\pd\vstplugins set LIB= -lib d:\pd\bin\iemgui set LIB= -lib d:\pd\externs\zexy %LIB% set LIB= -lib d:\pd\bin\iemlib1 %LIB% set LIB= -lib d:\pd\bin\iemlib2 %LIB% set LIB= -lib d:\pd\bin\iem_t3_lib %LIB% set LIB= -lib d:\pd\bin\iem_mp3 %LIB% set LIB=-lib d:\pd\lib\lrshift~ %LIB% set LIB= -lib d:\pd\ext13w\ext13 %LIB% set LIB=-lib d:\pd\mjLib\mjLib %LIB% set LIB=-lib d:\pd\motex_1_1_3\motex %LIB% set LIB=-lib d:\pd\xeq\xeq %LIB% set LIB=-lib d:\pd\xsample\msvc-debug\xsample %LIB% set LIB=-lib d:\pd\vst\Debug\vst %LIB% set LIB= -lib \pd\lib\grantabr~ %LIB% set LIB= -lib \pd\lib\grantabw~ %LIB%
set DEV=-midioutdev 1 \pd\bin\pd %DEV% %LIB% -path d:\pd\iemabs;d:\pd\lib %* _______________cut above here
If you are getting errors about not being able to connect things when you load patches the chances are you have not got the required libraries - http://www.pure-data.org will help you out there.
Stick with it - there is one hell of a learning curve for the first few days but it soon levels off. And its well worth the climb :-)
cheers
mark
junklight - dark experimental electronics http://www.junklight.com
-----Original Message----- From: daobra daloosh [mailto:daobra@gmx.net] Sent: 11 July 2002 23:40 To: pd-list@iem.kug.ac.at Subject: [PD] no luck yet.
hello,
i am new to the list and PD, very green, and in need of a little help, please,
i have been trying to get pd up and running on my system running xp and 98se but without much success.
i do get audio signals through my RME HDSP out so far but this is only with the testing audio patch, any other patch or .pd file i tried to load generates a lot of errors.
MMSYSTEM02, device out of range. this is under 98.
under XP: MidiInOpen: a device ID has been used that is out of range for your system.
and i get just a lot of errors when i try to load just about any .pd. Nothing will work, connection failed; all kinds of error's --> the program can't seem to connect or comunicate with audiocard or pd, no commands can be exectuted.
could this be a networking setup related thing? the pc has normal internet setup for cable. this only just came to mind, actually.
do i need drivers or special tcp/ip networking setup config to get things running smooth?
i have basically no idea now how to get the command promt actually executing some flags, this is command line talk, i understand , but following the manual doens't help much.
pd seems really quite powerful, however, also a little intimidating to me. i would really like to have any hints or pointers that get me up and running.
sorry for the long newbie type of post, if you think i better keep my hands of PD, just tell me.
but still, any help appreciated.
celeron 900/256 RME HDSP multiface
best, daobra