Joining late to the discussion--is there now a native Pd external that allows direct connection to RPi pins or is there still a need to use middleware to access the data steam? If former, where can one get their hands on the source--I would love to include it in the next pd-l2ork RPi release?
Please advise.
Just checked it again and noticeably in comparison to all our previous testing there is now (as good as) zero errors from the sensors. Rock solid. Joy.On 23 May 2013 13:16, Julian Brooks <jbeezez@gmail.com> wrote:P.S. Will give this thread a nudge when I've documented it all (it's a whopper)JulianBeen much fun,Thank you thank you thank you.Long way of saying that I've updated my C file to reflect this and all working lovely.and works really well so far-which is good. Didn't get my patching done though:)So spent until 4am building a fresh image fromThe RPi was a rev1 board and my other is rev2 and the custom image I made doesn't work on the rev2 board. Always know this was a possible issue but, you know, got a ton of other stuff to be getting on with.OAN - Whilst wanting to progress the Pd patch last night, having left it since last Friday, I plugged the box with all our gubbins in and promptly blew up the Pi - proper fried it it seems. Loose power cable to the Pi and we think it was touching a screw on the box. Kapput.So working now - blimey.This is also after spending a half hour this morning checking and double checking all the various lines and connections.To try and keep the protoplate reasonably tidy we'd soldered to the underneath of the plate. Somehow in the flipping from one side to the other we'd messed up and missed by two connecting it to ground and therefore making complete sense as to why only one sensor was working.In the process of doing that we also discovered that the line from gpio17 to IC pin11 was in fact not connected to gpio17 at all!That was really useful as it was the first definite confirmation that both sensors are working correctly.We managed to confirm both sensors are working via pin11 from the IC going between earth & 3v with gpio17 disconnected and running i2cdetect.Hey Martin,Many thanks for the extra wiring diagram.
http://moebiuslinux.sourceforge.net/
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list