Pi 2 is a different architecture than the Pi (ARMv7 vs ARMv6 - huge changes for floating point etc). Try the Pd on Miller's site compiled for the UDOO
- should run fine.
On Mon, Jul 6, 2015 at 1:42 PM, Rick Snow ricksnow@gmail.com wrote:
Just to clarify: This is a Raspberry Pi 2 I am using. Maybe it needs a different architecture?
I tried renaming as wiringPi_gpio.pd_linux then when instantiating the object it crashes pd.
i really appreciate the suggestions. Hopefully this will help some other folks as well.
cheers, Rick
On Mon, Jul 6, 2015 at 1:11 PM, Antoine Villeret < antoine.villeret@gmail.com> wrote:
hum, strange,
I was pretty sure that pd loads l_arm on RPi,
btw, did you try to rename the .l_arm in .pd_linux ?
a
-- do it yourself http://antoine.villeret.free.fr
2015-07-05 23:53 GMT+02:00 Rick Snow ricksnow@gmail.com:
Thanks Antoine.
The pi2 does not seem to be looking for .l_arm When I try to load the object with verbose checked I get: tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio.l_i386 and failed tried /usr/local/lib/pd-externals/wiringPi_gpio.l_i386 and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.l_i386 and failed tried /usr/lib/pd/extra/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio.pd_linux and failed tried /usr/local/lib/pd-externals/wiringPi_gpio.pd_linux and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd_linux and failed tried /usr/lib/pd/extra/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.l_i386 and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /usr/local/lib/pd-externals/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /usr/lib/pd/extra/wiringPi_gpio/wiringPi_gpio.pd_linux and failed tried /home/pi/pd-externals/wiringPi_gpio.pd and failed tried /home/pi/pd-externals/wiringPi_gpio.pd and failed tried /home/pi/pd-externals/wiringPi_gpio.pd and failed tried /usr/local/lib/pd-externals/wiringPi_gpio.pd and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pd and failed tried /usr/lib/pd/extra/wiringPi_gpio.pd and failed tried /home/pi/pd-externals/wiringPi_gpio.pat and failed tried /home/pi/pd-externals/wiringPi_gpio.pat and failed tried /home/pi/pd-externals/wiringPi_gpio.pat and failed tried /usr/local/lib/pd-externals/wiringPi_gpio.pat and failed tried /usr/lib/puredata/tcl/../extra/wiringPi_gpio.pat and failed tried /usr/lib/pd/extra/wiringPi_gpio.pat and failed wiringPi_gpio
On 7/5/15, Antoine Villeret antoine.villeret@gmail.com wrote:
2015-07-05 23:00 GMT+02:00 Rick Snow ricksnow@gmail.com:
Dear list,
In addition to having trouble getting pd 46.6 to install on the
Raspberry
Pi 2 I am having trouble compiling the NYU wiringPi objects.
Does anyone know which architecture the Pi 2 requires? l_arm or .pd_linux?t
both are good candidates but pd_linux could be of arch i686, x86_64 or arm (or even something
else)
I am able to compile the objects using the provided makefile as an
l_arm
object but when I try to create a .pd_linux object with the makefile terminal returns: "* No rule to make target 'wiringPi_gpio.pd_linux'. Stop."
run pd with -verbose option and look at pd's console to know what it is trying to load when you make a [wiringPi_gpio] object it should try to load .l_arm
a
same goes for the wiringPi_mcp3008.pd_linux object.
Any advice greatly appreciated! Rick
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list