Hi Patrick

If I understand correctly what you're trying to do, an Arduino on its own is too slow. There's an audio shield you can get that will play samples, but anything Pd-style you need something faster.

If you're using Pduino anyway, could you use the Arduino for control and just run the audio on the computer?

cheers
dafydd

On Fri, Nov 25, 2011 at 1:17 PM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
So that worked fine. Is there a way to include the pd patch onto the micro controller a la RJDJ? I would like to put bill orcutts grain/granny patch via pd onto the arduino board and control it via pduino. Is this possible or does te instrument have to be coded in .pde form? 

Patrick Pagano B.S.,M.F.A
Digital Media Engineer
UF Digital Worlds Institute


On Nov 25, 2011, at 12:31 AM, "Dafydd Hughes" <dafydd61@gmail.com> wrote:

Welcome. Glad I could help.

On Fri, Nov 25, 2011 at 12:30 AM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
That seems to work then i just ignore the 0 bang.
thanks!
pp
From: Dafydd Hughes [dafydd61@gmail.com]
Sent: Friday, November 25, 2011 12:22 AM

To: Pagano, Patrick
Cc: pd-list@iem.at
Subject: Re: [PD] arduino question

Try this.

On Fri, Nov 25, 2011 at 12:19 AM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
Yes.

r_ANA_0

i assume it sees it as constantly sending something but i do not know how to control it.

pp

From: Dafydd Hughes [dafydd61@gmail.com]
Sent: Friday, November 25, 2011 12:18 AM

To: Pagano, Patrick
Cc: pd-list@iem.at
Subject: Re: [PD] arduino question

Oh cool - is this your stuff coming out of ANA_0?

On Fri, Nov 25, 2011 at 12:16 AM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
it's a number box that is constantly sending 0 or 1 depending on whether the sensor is on or off.

the value is a constant stream and i am just unsure how to just get ONE bang when it's turned on and  ignore the 0 bang when it turns off.


From: Dafydd Hughes [dafydd61@gmail.com]
Sent: Friday, November 25, 2011 12:12 AM

To: Pagano, Patrick
Cc: pd-list@iem.at
Subject: Re: [PD] arduino question

Hi Patrick

Do you mean you only want a bang when the sensor turns on?

What do the messages look like coming from the arduino? What is that second value?

I hope I'm able to help here!

cheers
dafydd

On Fri, Nov 25, 2011 at 12:04 AM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
Kind of. I am still a newbie to this but i have been using pduino_playaround.
So are you suggesting removing the second value that is sent by Arduino?
What is happening is that pd receives the "on" from the sensor and keeps baninging until the sensor turns off and then it sends another bang when it turns off so if the sensor turns it on it eventually bangs again and resets to 0 again. whereas i just want it to send  bang when it's activated to play a sound and not band when it's done.

pp
From: Dafydd Hughes [dafydd61@gmail.com]
Sent: Friday, November 25, 2011 12:00 AM
To: Pagano, Patrick
Cc: pd-list@iem.at

Subject: Re: [PD] arduino question

You know what? I'm not sure. I've never worked with those sensors. What do you mean by "message to bang?" are you doing a call-and-response between Pd and the Arduino?

Are you working with this sketch? http://www.arduino.cc/playground/Code/PIRsense

On Thu, Nov 24, 2011 at 11:28 PM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
that kind of works but after it sends it's message to bang something the PIRturns off when the sensor goes "off" and it sends another value is there a way to ignore that?
 
pp
From: Dafydd Hughes [dafydd61@gmail.com]
Sent: Thursday, November 24, 2011 10:43 PM
To: Pagano, Patrick
Subject: Re: [PD] arduino question

Hi Patrick

Are you trying to turn the sample on/off by comparing it to a range?

If so, have you tried something like:

[< 0.3]
|
[change]

?

cheers
dafydd

On Thu, Nov 24, 2011 at 10:31 PM, Pagano, Patrick <pat@digitalworlds.ufl.edu> wrote:
Hi

I am using a PIR sensor with pduino playground and I have the sensor picking up movement. It's my first pd-arduino excursion so forgive the noobie-ness. When I get the out form the PIR sensor it give me a constant value of SOMETHING The entire time. It's output values range from 0.13-0.664/0.665 constantly. I just want to use the sensor to turn off/on a sample but the file is constantly being "banged" a value. How do I just out put an on/off based upon  this constant stream of Data? I tried select bit that does seem to be working.

It's a simple parallax PIR sensor and I have been having good luck getting usd to wiring and  the breadboard etc. but when I take the analog0 stream/port into pd I do not know how to control that data/

Any help?

pp

_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list