Aha! That must be it! The HC-06 is configured at a 9600 baud rate by default, and the AnalogFirmata runs at 57600 (in the setup function). You should either configure the bluetooth to that baud rate, or change the AnalogFirmata sketch. All three, the bluetooth, the Arduino sketch, and [comport], should run at the same baud rate.
This worked for me for configuring the bluetooth http://www.plastibots.com/index.php/2013/12/31/hc-06-bluetooth-module-getting-this-sucker-into-at-command-mode/

On Thu, Sep 3, 2015 at 8:09 PM, Mirko Petrovich <mirko.petrovich@gmail.com> wrote:
have you tried firmata at 115200 baud ?

M

On Thu, Sep 3, 2015 at 6:54 PM, ray Y <raybuay@hotmail.com> wrote:

yeah, that is correct. also you need to reset the board with the button, something i didn't

know because i'm very new to the arduino. right now when i'm in the arduino test patch with

the analogfirmata loaded into the board the usb serial works but when i change the comport

to where the bluetooth is, the red light stops blinking (indication that it is linking up) but

when i move the variable resistor pd returns an UNKNOWN_INPUT_COMMAND and a bunch 

of numbers and it gets kind of stuck. if i switch back to the usb cable connection it works fine.

is there something that should be done with the firmata?


regards

r.y





De: Alexandros Drymonitis <adrcki@gmail.com>
Enviado: miércoles, 2 de septiembre de 2015 01:43 a. m.
Para: ray Y
Cc: pd-list@lists.iem.at
Asunto: Re: [PD] bluetooth PDuino
 
I think that you can't upload code to the Arduino via the bluetooth, so you'll have to upload it via USB, and then unplug it and use the bluetooth. [comport] will be able to see it without problems.

On Wed, Sep 2, 2015 at 1:03 AM, ray Y <raybuay@hotmail.com> wrote:



From: raybuay@hotmail.com
To: adrcki@gmail.com
Subject: RE: [PD] bluetooth PDuino
Date: Tue, 1 Sep 2015 14:57:32 -0700


usb cable uploads the code to the board 
but when i change the comport to use the
board via bluetooth after pairing, the arduino 
program sends errors and doesn't complete the upload. 

i need to be able to use the arduino exactly as it works
but wirelessly via bluetooth (or wifi if is not more complicated)
i know that you can do this without doing anything with an arduino BT
but i don't have one so i've been trying to make it work with the uno
an hc-06 bluetooth module

regards

r.y


Date: Wed, 2 Sep 2015 00:35:17 +0300
Subject: Re: [PD] bluetooth PDuino
From: adrcki@gmail.com
To: raybuay@hotmail.com
CC: pd-list@lists.iem.at

Yes, what is the problem exactly?

On Wed, Sep 2, 2015 at 12:23 AM, ray Y <raybuay@hotmail.com> wrote:
hello 

i've been trying to use an hc-06 bluetooth module to link up with an arduino
board running the firmata for pduino and this stupid thing is killing me!
i just need to cut up the stupid usb serial cable!

has anyone done this before

thanks

r.y

_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list



_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list



_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list