On Apr 26, 2007, at 9:45 AM, João Miguel Pais wrote:
Hello Hans and list,
we're in the workshop with Sukandar in Berlin, and something
strange just happened. My arduino isn't the newest, it has with the ATMEGA8 chip
(the one we got in Zürich some time ago). I've put the latest firmata
into it, and the analogue stuff worked quite well.While doing some digital inputting (just simple switches) a few things happen:
- the inputs/outputs don't match: if the switch is connected in the
input 2, it comes out from 5 (the same to all other inputs, although I
didn't mapped them). But consequently, if I switch the input 2 off, the
output 5 switches off. This doesn't happen on other participants who have the newest arduino board.
- someone here mentioned that the arduino has its own pull-up
resistors. but in the firmware they're switched off, and we found no
possibility to switch it in the arduino-test patch. so we must build our own pull-up resistors in the circuit, outside. is it possible with this firmata to activate the pull-up resistor in arduino from the pd patch? if not, do you think you're going to
implement it? or could you tell just quickly how enable it?
Hmm, I am still mostly working with the ATMEGA8 boards. I am unaware
of a way to disable or enable pull-up resistors in the ATMEGA8/
Arduino. If such is a thing is a possibility, I would happily add it
to the Firmata firmware.
Do you have any docs on how to do this? Have you tried the Arduino
forums?
.hc
Thanks,
João Miguel Pais
-- Friedenstr. 58 10249 Berlin Deutschland Tel +49 30 42020091 Mob +49 162 6843570 jmmmpais@googlemail.com skype: jmmmpjmmmp http://www.puredata.org/Members/jmmmp IBM Thinkpad R51, XP, Pd-Ext-0.39-2-t5
PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/ listinfo/pd-list
Using ReBirth is like trying to play an 808 with a long stick. - David Zicarelli