Pd-list February 2020

pd-list@lists.iem.at

46 participants
65 discussions

Fwd: bytebeat example
by Simon Iten 14 Feb '20

14 Feb '20

sorry, went off list... ---------- Forwarded message --------- From: Simon Iten <itensimon(a)gmail.com> Date: Fri, Feb 14, 2020, 07:36 Subject: Re: [PD] bytebeat example To: Kylee Kennedy <kmkennedy(a)gmail.com> sure, well it is so obvious i figured i don't need to mention. just adjust the signal that goes into the rpole. i ended up replacing the whole section with a phasor~ since i can reverse formula playback that way. On Thu, Feb 13, 2020, 22:07 Kylee Kennedy <kmkennedy(a)gmail.com> wrote: > It would be helpful to say How you figured it out so others can learn. > Nothing worse that looking up a question in google and finding someone > with the same question and then just a "nevermind figured it out" response. > > Cheers, > Kylee > > On Wed, Feb 12, 2020 at 3:09 PM Simon Iten <itensimon(a)gmail.com> wrote: > >> nevermind, figured it out :-) lots of fun >> >> > On 12 Feb 2020, at 21:07, Simon Iten <itensimon(a)gmail.com> wrote: >> > >> > hi there, >> > >> > stumbled across your bytebeat example, great! >> > >> > i am using the all pd variant with expr~ (dexpr~). is there a way to >> change the speed at which the formula runs? i assume it runs at samplerate, >> but it is hard to change that dynamically, right? >> > >> > i did not succed with my first attempts. (without using the buffer >> subpatch) >> > >> > thanks for any insights? >> > >> > >> >> >> >> >> _______________________________________________ >> Pd-list(a)lists.iem.at mailing list >> UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list >> >

1 0

Delay samples in samples in Vanilla
by Ricky Graham 13 Feb '20

13 Feb '20

Hello, How does one delay samples (input) in samples (unit) these days? Is there a [z~] or [delay~] equivalent? Thanks! Ricky

3 2

bytebeat example
by Simon Iten 12 Feb '20

12 Feb '20

hi there, stumbled across your bytebeat example, great! i am using the all pd variant with expr~ (dexpr~). is there a way to change the speed at which the formula runs? i assume it runs at samplerate, but it is hard to change that dynamically, right? i did not succed with my first attempts. (without using the buffer subpatch) thanks for any insights?

1 1

Re: [PD] Automatically add deken packages to path ?
by nik＠parkellipsen.de 12 Feb '20

12 Feb '20

Hi, yes, it fixes the problem. I haven't used Pd heavily in recent times, and wasn't aware of the [declare] thing (and I guess my general expectation was that something installed by a package manager is available right away without any further interaction). But now, if someone asks me why stuff installed with deken isn't available I at least know the answer :) Best, Niklas Antoine Rousseau wrote on 12.02.2020 13:41 (GMT +01:00): > > > Hi, > > > the best way IMO is to add a declaration into the patch which is using the > library. > > E.g use [declare -path ggee] > > > If this doesn't fix your problem please give use a more detailed > description (OS, Pd version, what external you try to load, which paths > are declared in configuration etc...). > > > Le mer. 12 févr. 2020 à 10:19, <nik(a)parkellipsen.de > <mailto:nik@parkellipsen.de> > a écrit : > >> Hi, >> >> whenever installing a package with deken, I still have to add the path >> manually for the extensions to be found. >> >> The base path is present, but the package paths are not. >> >> Is this the expected behaviour ? If not, is there a setting >> so that the installed packages are found automatically ? >> >> Best, >> Niklas >> >> >> _______________________________________________ >> Pd-list(a)lists.iem.at <mailto:Pd-list@lists.iem.at> mailing >> list >> UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list > >

2 1

Re: [PD] Automatically add deken packages to path ?
by Dan Wilcox 12 Feb '20

12 Feb '20

The idea with [declare] is similar to Python "import". We have moved away from Pd-extended's "just load everything into the same name space" approach towards a more explicit declaration for paths and libs. This requires an extra step but it also *helps* make patches more portable in that it is much clearer to see what libraries the original author specifies as opposed to "oh I guess it worked in Pd-extedend but I have no idea what externals those objects come from." > Hi, > > yes, it fixes the problem. > > I haven't used Pd heavily in recent times, > and wasn't aware of the [declare] thing (and I guess my general expectation > was that something installed by a package manager is available right away > without any further interaction). > > But now, if someone asks me why stuff installed with deken isn't available > I at least know the answer :) > > Best, > Niklas -------- Dan Wilcox @danomatika <http://twitter.com/danomatika> danomatika.com <http://danomatika.com/> robotcowboy.com <http://robotcowboy.com/>

1 0

start and end point (WAV files)
by Mario Buoninfante 12 Feb '20

12 Feb '20

Hi, >From what I read this may be not needed, but for those interested here you can find the wav specs http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html Cheers, Mario

2 1

Re: [PD] Automatically add deken packages to path ?
by Dan Wilcox 12 Feb '20

12 Feb '20

Deken initially did this, but there are problems with this approach as it partially negates the usage of [declare]. It is *highly* recommended to use [declare] moving forward. Do you use the Pd Documents directory? If so, the Documents/Pd/externals directory is part of the path so externals there can be loaded via declare, ie. something like Documents/Pd/externals/cyclone & [declare -path cyclone]. This was a compromise, in the end. > On Feb 12, 2020, at 10:54 AM, pd-list-request(a)lists.iem.at wrote: > > Date: Wed, 12 Feb 2020 10:19:41 +0100 (CET) > From: nik(a)parkellipsen.de <mailto:nik@parkellipsen.de> > To: pd-list(a)lists.iem.at <mailto:pd-list@lists.iem.at> > Subject: [PD] Automatically add deken packages to path ? > Message-ID: <20200212091941.6349C6120343(a)dd39102.kasserver.com <mailto:20200212091941.6349C6120343@dd39102.kasserver.com>> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi, > > whenever installing a package with deken, I still have to add the path > manually for the extensions to be found. > > The base path is present, but the package paths are not. > > Is this the expected behaviour ? If not, is there a setting > so that the installed packages are found automatically ? > > Best, > Niklas -------- Dan Wilcox @danomatika <http://twitter.com/danomatika> danomatika.com <http://danomatika.com/> robotcowboy.com <http://robotcowboy.com/>

2 1

Automatically add deken packages to path ?
by nik＠parkellipsen.de 12 Feb '20

12 Feb '20

Hi, whenever installing a package with deken, I still have to add the path manually for the extensions to be found. The base path is present, but the package paths are not. Is this the expected behaviour ? If not, is there a setting so that the installed packages are found automatically ? Best, Niklas

1 0

Pd Workshop in Oakland/CA next sunday (february 16th 2020)
by Alexandre Torres Porres 12 Feb '20

12 Feb '20

Hi there, I'm giving a workshop followed by a performance on sunday the 16th at *Pro Arts Gallery & Commons 150 Frank H Ogawa Plz, Oakland, California 94612* - workshop is from 2pm to 6pm, performance should start like 7pm and include other people (yet to be announced). The workshop presents my ELSE library and my Live Electronics tutorial. We'll cover some synthesis and processing techniques. We'll build a modular synth and other creative examples with the provided tools and topics. See more info in the facebook event. Thanks! *About me:* Alexandre Torres Porres has a masters in composition and a PhD in computer music. He's a Pure Data expert and active in the Pd community as a developer of externals and tutorials. As a composer and musician, he's collaborated with several different projects in pop/experimental, interactive installations, eletroacoustics, improvisation, noise & chamber/orchestral music. He's mostly active in the experimental music scene. His solo performances are mostly live electronics setups developed with Pure Data and his externals, and they usually follow a drone and noise aesthetics. More details and information on the facebook event: https://www.facebook.com/events/575218576632474 Or just write me and ask me about it. Thanks *Porres*

1 0

pdinfo.com is down
by Alexandre Torres Porres 11 Feb '20

11 Feb '20

that's it, can't download from deken and stuff xheers

3 3

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list February 2020