Pd-list December 2010

pd-list@lists.iem.at

120 participants
216 discussions

masking or routing individual particles in syncgrain~
by ronni montoya 31 Dec '10

31 Dec '10

Hi dear list, i was wondering how can i mask or anulate individual grains from an train generated with syncgrain? I was wondering also if its posible to route an individual grain? Por example if i would like to apply an effect just to a particle and not the whole particle train thanks in advance R.

2 1

CUBEmixer issues (IEM site unresponsive)
by michael noble 31 Dec '10

31 Dec '10

hi, Is this at all the right place to be posting issues with CUBEmixer? There doesn't seem to be a dedicated support avenue at sourceforge, and I can't check the iem.at site as it's been unresponsive (timeouts) for a few days now from both where I am in Korea and from the US via an SSH tunnel. After apparently successfully building CUBEmixer (the gui comes up and finds the dsp engine), I've run into problems running the configurator. Running configurator.sh in /bin always fails with an unexpected ")" in functions.sh, which seems to be some sort of version check for pd. Running the confugrator directly from /tools will get it to load, but it then fails upon trying save settings as it ends up using convoluted paths (it seems as though its appending the path of the relevant files twice to make a non-existent path). Does anyone have any familiarity with CUBE mixer that they might have a clue what's going on here? thanks Michael

2 2

Re: [PD] : pd + sc with jackd
by oskoff lovich 30 Dec '10

30 Dec '10

Hi Miquel and all, sometimes i used sc and puredata with jackd and they work very good,, with ubuntu karmic koala 9.10 in a cheap acer laptop i usually open first jack at 48000 sample rate, then supercollider and after pd -jack maybe is a problem with diferent sample rate options or try with diferents settings of jack ( on/off realtime ect) salut! zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz Hello. I use pd plus sc in puredyne and maverick. The OSC communication is fine and fast, but the audio in puredata is plenty of dio errors. I have tried many combinations of command line options, with jackd and with pd. I have compiled and jackd and puredata. Someone is using these two environments, whitou audio problems? How? In what operating system? With that computer? Thanks. -- >>>http://noconventions.mobi/noish

3 2

building pd's: libjack-dev unistalls jackd2
by Pedro Lopes 30 Dec '10

30 Dec '10

Don't know if its worth to mention in this page [1], but when I installed the needed libjack-dev package (towards building pd 0.43 in Ubuntu Maverick 32 bits) it removed jackd2. It seems that they cannot sit together (maybe this should be posted in the jackd mailing list). The simple workaround is to install the jackd1 package, that can live happily alongside the dev one. Anyway kudos for the wiki maintainers, that how-to is very easy. If you feel that the warning about "jackd2 vs. lib-jackdev" is worth noting, I can edit the page. Best regards, Pedro [1] http://puredata.info/docs/developer/UbuntuMaverick -- Pedro Lopes (MSc) contact: pedro.lopes(a)ist.utl.pt website: http://web.ist.utl.pt/Pedro.Lopes

2 2

Re: [PD] [PD-dev] PD L2Ork 20101229 snapshot now available
by Ivica Ico Bukvic 30 Dec '10

30 Dec '10

You're absolutely right. I completely forgot there are other tcl files that the pd.tk now relies upon and that they need to be copied is well. I will reupload to the tarball with this change. Many thanks for the feedback! Cheers! Patrick Boivin <pboivin(a)gmail.com> wrote: >On Wed, Dec 29, 2010 at 9:09 PM, Ivica Ico Bukvic <ico(a)vt.edu> wrote: >>> If you are trying to run the app without installing, then copy pd.tk from >>> pd/src/ dir into pd/bin/ dir. I forgot to add this as it is actually not a part >>> of the actual install. I will reupload another version that includes this but >>> please understand this is not the "default" way of things. You will likely >>> have a much better experience with doing actually make install and >>> now that pd-l2ork exists in a separate path from the pd-vanilla and >>> extended, it should happily coexist next to them. >> >> Actually, I stand corrected. Because pd-l2ork is now looking for pd.tk in a specific folder (namely due to the way binaries were configured in /usr/local/lib/pd-l2ork/bin), you will not be able to run pd-l2ork any more without installing. > >Hi, > >After copying *.{tcl,tk} from pd/src/ to pd/bin/ I was able to run the >pd-l2ork executable from the unpacked tarball. (without installing...) > > >Patrick

1 0

kinect object?
by Jordi Sala 30 Dec '10

30 Dec '10

Hi, I'd like to know if someone is working for a kinect object for pd. Thanks! -- Jordi Sala http://musa.poperbu.net

5 4

Re: [PD] [PD-dev] is there a way for an object to detect whethere its inlet is connected to something
by patko 30 Dec '10

30 Dec '10

hello, it's usually done in a patch by using [switch~] best ----- "Ivica Ico Bukvic" <ico(a)vt.edu> a écrit : > Hi all, > > I guess subject says it all. For the sake of efficiency I am hoping > to > detect whether an inlet is connected to anything and if so to perform > its signal-based operations. Otherwise, it should remain dormant. Is > there anything in the existing API that allows for this? > > Many thanks! > > Ico > > > _______________________________________________ > Pd-dev mailing list > Pd-dev(a)iem.at > http://lists.puredata.info/listinfo/pd-dev -- Patrice Colet

4 6

pidip error color mode
by Jose Luis Santorcuato 30 Dec '10

30 Dec '10

Hi all, I am working with the library PiDiP, I have previously worked with osx and linux ubuntu, had worked with the netbook acer and had no problems, but now I get the following error when trying to open the video window (i want to show a live video from webcam, easy in olds projects): pdp_v4l2: unsupported color model: 1497715271 also pdp_v4l2: unsupported color model: 1195724874 What is it? Greetings Josè -- http://arselectronicachile.blogspot.com http://comunicacionnativa.blogspot.com/ http://www.myspace.com/santorcuato

3 7

soft edge
by cyrille henry 30 Dec '10

30 Dec '10

Hello, i've updated the soft edge patch for Gem. you can now have different matrices geometry between the screen and the computer. i.e : 4 screen in a raw connected to the computer can be used to display an image based on 2x2 screen. i think this patch need a small gui cleanup (jack?) to be add to Gem examples. Cyrille

2 5

pd + sc with jackd
by miquel parera 30 Dec '10

30 Dec '10

Hello. I use pd plus sc in puredyne and maverick. The OSC communication is fine and fast, but the audio in puredata is plenty of dio errors. I have tried many combinations of command line options, with jackd and with pd. I have compiled and jackd and puredata. Someone is using these two environments, whitou audio problems? How? In what operating system? With that computer? Thanks. -- Creative Commons & Open Source experimental electronic & computer sounds. http://musicnumbers.wordpress.com/

1 0

← Newer
1
2
3
4
5
6
7
...
22
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Pd-list December 2010