Weird. It crashes for me on OSX when libpd is built with -O3 and the program is built with or without -O3.
*Note: I just finished reorganizing the libpd samples by language name. If you do a pull, the multi instance test is now located in samples/c/pdtest_multi
Rebuilding and running it again yields:
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: 13 at address: 0x0000000000000000
outlet_float (x=0x3f7ffc2a3f7ffc38, f=0) at m_obj.c:388
388 for (oc = x->o_connections; oc; oc = oc->oc_next)
#0 outlet_float (x=0x3f7ffc2a3f7ffc38, f=0) at m_obj.c:388
#1 0x000000010006f0b9 in outlet_bang (x=<value temporarily unavailable, due to optimizations>) at m_obj.c:363
#2 0x00000001000953f9 in metro_tick (x=0x10021ad90) at x_time.c:162
#3 0x0000000100071010 in sched_tick () at m_sched.c:418
#4 0x0000000100096733 in libpd_process_float (ticks=1, inBuffer=<value temporarily unavailable, due to optimizations>, outBuffer=<value temporarily unavailable, due to optimizations>) at z_libpd.c:185
#5 0x0000000100000d67 in main ()
some frame detail:
(gdb) frame 0
#0 outlet_float (x=0x3f7ffc2a3f7ffc38, f=0) at m_obj.c:388
388 for (oc = x->o_connections; oc; oc = oc->oc_next)
(gdb) frame 1
#1 0x000000010006f0b9 in outlet_bang (x=<value temporarily unavailable, due to optimizations>) at m_obj.c:363
363 pd_bang(oc->oc_to);
(gdb) frame 2
#2 0x00000001000953f9 in metro_tick (x=0x10021ad90) at x_time.c:162
162 outlet_bang(x->x_obj.ob_outlet);
(gdb) frame 3
#3 0x0000000100071010 in sched_tick () at m_sched.c:418
418 (*c->c_fn)(c->c_owner);
(gdb) frame 4
#4 0x0000000100096733 in libpd_process_float (ticks=1, inBuffer=<value temporarily unavailable, due to optimizations>, outBuffer=<value temporarily unavailable, due to optimizations>) at z_libpd.c:185
185 PROCESS(,)
(gdb) frame 5
#5 0x0000000100000d67 in main ()
On Apr 22, 2015, at 12:15 AM, Miller Puckette <
msp@ucsd.edu> wrote:
I think it was optimized since I had already made libpd, not from the
sampes/.../multi directory. But anyhow I re-did it as you suggest with
the same result.... can't make it fail...
cheers
M
On Wed, Apr 22, 2015 at 12:03:28AM -0400, Dan Wilcox wrote:
You ran it without the optimizations since I added the debug option. Remove DEBUG=true from line 33 in the Makefile: https://github.com/libpd/libpd/blob/master/samples/c_samples/multi/Makefile#L33 <https://github.com/libpd/libpd/blob/master/samples/c_samples/multi/Makefile#L33> and do a full clean before rebuilding:
cd ../../../ && make clobber && cd - && make
--------
Dan Wilcox
@danomatika
danomatika.com <http://danomatika.com/>
robotcowboy.com <http://robotcowboy.com/>
On Apr 21, 2015, at 11:57 PM, Miller Puckette <msp@ucsd.edu> wrote:
Hi Dan et al -
I gave this a try:
git clone https://github.com/libpd/libpd.git
[copies pd sources into libpd/pure-data]
cd libpd
make
cd samples/c_samples/multi/
make
./multi_pdtest multi_test.pd `pwd`
and got output:
print: 0
1003-frequency: bang
print: 0
1004-frequency: bang
1003-frequency: 1
1004-frequency: 2
1.000000 1.000000 0.999999 0.999999 0.999998 0.999998 0.999997 0.999997
1.000000 1.000000 0.999998 0.999998 0.999996 0.999996 0.999995 0.999995
print: 1
0.999944 0.999944 0.999943 0.999943 0.999942 0.999942 0.999941 0.999941
print: 1
0.999815 0.999815 0.999810 0.999810 0.999804 0.999804 0.999799 0.999799
print: 2
print: 2
This on Fedora 21, 64 bits, Intel hardware.
I guess something subtle is happening, maybe in Pd and unrelated to libpd?
cheers
Miller
On Tue, Apr 21, 2015 at 06:00:15PM -0400, Dan Wilcox wrote:
Howdy Miller,
Following up from the dev list last year, I added your multi instance test to the c samples included with libpd: https://github.com/libpd/libpd/tree/master/samples/c_samples/multi <https://github.com/libpd/libpd/tree/master/samples/c_samples/multi>
The one thing I want to double check is the changes to z_libpd.c you mentioned in http://lists.puredata.info/pipermail/pd-dev/2014-05/019832.html: <http://lists.puredata.info/pipermail/pd-dev/2014-05/019832.html:>
Here's how I modified libpd_wrapper/z_libpd.c:
55d54
< sys_time = 0;
110c109
< sched_tick(sys_time + sys_time_per_dsp_tick);
---
sched_tick();
130c129
< sched_tick(sys_time + sys_time_per_dsp_tick); \
---
sched_tick(); \
Currently, that line is https://github.com/libpd/libpd/blob/master/libpd_wrapper/z_libpd.c#L171 <https://github.com/libpd/libpd/blob/master/libpd_wrapper/z_libpd.c#L171> and I’m getting a segfault if I replace it with sched_tick(); AND set gcc optimization to -O3
Here’s a gdb backtrace:
#0 0x0000000100091f2f in outlet_float (x=0x3f7ffc2a3f7ffc38, f=0.999937057) at m_obj.c:388
#1 0x00000001000ac572 in pdfloat_bang (x=0x10021ac20) at x_connective.c:89
#2 0x0000000100093d58 in pd_bang (x=0x10021ac20) at m_pd.c:267
#3 0x0000000100091ddd in outlet_bang (x=0x10021ae20) at m_obj.c:363
#4 0x00000001000c45e4 in metro_tick (x=0x10021ada0) at x_time.c:162
#5 0x0000000100095021 in sched_tick () at m_sched.c:418
#6 0x00000001000c5d4d in libpd_process_float (ticks=1, inBuffer=0x7fff5fbffa50, outBuffer=0x7fff5fbff750) at z_libpd.c:173
#7 0x0000000100000d18 in main ()
If I don’t optimize, it works fine:
print: 0
1003-frequency: bang
print: 0
1004-frequency: bang
1003-frequency: 1
1004-frequency: 2
1.000000 1.000000 0.999999 0.999999 0.999998 0.999998 0.999997 0.999997
1.000000 1.000000 0.999998 0.999998 0.999996 0.999996 0.999995 0.999995
print: 1
0.999944 0.999944 0.999943 0.999943 0.999942 0.999942 0.999941 0.999941
print: 1
0.999815 0.999815 0.999810 0.999810 0.999804 0.999804 0.999799 0.999799
print: 2
print: 2
--------
Dan Wilcox
@danomatika
danomatika.com <http://danomatika.com/>
robotcowboy.com <http://robotcowboy.com/>
On Apr 21, 2015, at 10:56 AM, Kjetil Matheussen <k.s.matheussen@gmail.com> wrote:
But for libpd, are you sure you need to add anything? Can't just the user
call the pdinstance_new and pd_setinstance functions directly?
http://lists.puredata.info/pipermail/pd-dev/2014-05/019832.html <http://lists.puredata.info/pipermail/pd-dev/2014-05/019832.html>
(BTW. When I wrote about libpds, I hadn't forgotten about the support for pd instances,
but since I didn't have all details in my head then, I didn't mention it. I should have though.)
On Tue, Apr 21, 2015 at 4:42 PM, Dan Wilcox <danomatika@gmail.com <mailto:danomatika@gmail.com>> wrote:
This should be possible with the current version of libpd which includes Miller’s multiple instance updates, see http://lists.puredata.info/pipermail/pd-dev/2014-05/019839.html <http://lists.puredata.info/pipermail/pd-dev/2014-05/019839.html>
I just haven’t gotten around to adding libpd-specific wrapper functions for this yet, but Miller provides code in that dev list exchange.
--------
Dan Wilcox
@danomatika
danomatika.com <http://danomatika.com/>
robotcowboy.com <http://robotcowboy.com/>
On Apr 21, 2015, at 6:00 AM, pd-dev-request@lists.iem.at <mailto:pd-dev-request@lists.iem.at> wrote:
From: Oliver Greschke <info@o-g-sus.de <mailto:info@o-g-sus.de>>
Subject: [PD-dev] Can somebody help to create a desktop / VST / AU version of a PD / libPD / app ?
Date: April 21, 2015 at 3:15:44 AM EDT
To: pd-dev@lists.iem.at <mailto:pd-dev@lists.iem.at>
Hi,
I am the creator of the Elastic Drums iOS app (with great PD help from Matt Davey).
It’s made with PureData, libPD and Objective-C.
I got asked a couple of times now, if there will be ever a standalone desktop version or even better Plugin (VST, AU) version of the app.
As far as I know, there are not ready to use workarounds to do so. Which is sad, because I can imagine a lot of fantastic plugins emerging from PD
Has somebody here some experience with doing such ports?
Then please contact me.
Cheers,
Oliver
info@o-g-sus.de <mailto:info@o-g-sus.de>
_______________________________________________
Pd-dev mailing list
Pd-dev@lists.iem.at <mailto:Pd-dev@lists.iem.at>
http://lists.puredata.info/listinfo/pd-dev <http://lists.puredata.info/listinfo/pd-dev>
_______________________________________________
Pd-dev mailing list
Pd-dev@lists.iem.at
http://lists.puredata.info/listinfo/pd-dev