[PD-cvs] externals/hardware/arduino/examples PD_all_inputs.pd, NONE, 1.1 PD_two_potentiometers.pd, NONE, 1.1 PD_inputs_to_PD.pd, 1.1, 1.2 PD_send_potentiometer.pd, 1.1, 1.2 - Pd-cvs

5 Mar 2006


      Update of /cvsroot/pure-data/externals/hardware/arduino/examples
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv20865
Modified Files:
    PD_inputs_to_PD.pd PD_send_potentiometer.pd 
Added Files:
    PD_all_inputs.pd PD_two_potentiometers.pd 
Log Message:
some example patches for the existing puredata firmwares, and the start of firmware for getting all inputs into Pd as fast as possible.  Some clean-up needed before a real release
Index: PD_inputs_to_PD.pd
===================================================================
RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_inputs_to_PD.pd,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** PD_inputs_to_PD.pd	4 Mar 2006 22:21:55 -0000	1.1
--- PD_inputs_to_PD.pd	5 Mar 2006 06:48:01 -0000	1.2
***************
*** 1,3 ****
! #N canvas 583 37 658 481 10;
  #X obj 29 56 r pushButton2;
  #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
--- 1,3 ----
! #N canvas 583 37 662 485 10;
  #X obj 29 56 r pushButton2;
  #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
***************
*** 27,31 ****
  -3754 -1 -1 0 256;
  #X obj 369 109 r potentioMeter2;
- #X msg 246 316 devicename /dev/tty.usbserial-181;
  #X text 242 298 On Mac OS X , set this to the right value:;
  #X msg 192 255 open $1;
--- 27,30 ----
***************
*** 66,69 ****
--- 65,69 ----
  #X restore 192 232 pd serin;
  #X text 273 233 serial port #;
+ #X msg 246 316 devicename /dev/tty.usbserial-191;
  #X connect 0 0 1 0;
  #X connect 2 0 3 0;
***************
*** 75,83 ****
  #X connect 15 0 14 0;
  #X connect 17 0 16 0;
! #X connect 18 0 21 0;
! #X connect 20 0 21 0;
! #X connect 21 0 29 0;
! #X connect 28 0 21 0;
! #X connect 29 0 32 0;
! #X connect 29 1 31 0;
! #X connect 34 0 20 0;
--- 75,83 ----
  #X connect 15 0 14 0;
  #X connect 17 0 16 0;
! #X connect 19 0 20 0;
! #X connect 20 0 28 0;
! #X connect 27 0 20 0;
! #X connect 28 0 31 0;
! #X connect 28 1 30 0;
! #X connect 33 0 19 0;
! #X connect 35 0 20 0;
--- NEW FILE: PD_all_inputs.pd ---
#N canvas 159 48 492 617 10;
#X obj 346 18 import zexy;
#X text 112 148 On Mac OS X , set this to the right value:;
#X text 5 38 You might need to select another port , check the Pd
window to see if it connected successfully:;
#X msg 136 120 close;
#X msg 116 165 devicename /dev/tty.usbserial-191;
#X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10
-3754 -1 -1 508 256;
#N canvas 162 133 518 368 serin 0;
#X obj 160 101 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
-1 0;
#X obj 241 251 s $0-number-canvas;
#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
-1 0;
#X obj 101 134 + 1;
#X obj 100 173 outlet;
#X obj 101 39 inlet;
#X msg 241 228 label $1;
#X obj 241 206 makefilename %d;
#X connect 2 0 3 0;
#X connect 3 0 4 0;
#X connect 3 0 7 0;
#X connect 5 0 2 0;
#X connect 6 0 1 0;
#X connect 7 0 6 0;
#X coords 0 -1 1 1 76 17 1 100 100;
#X restore 77 71 pd serin;
#X msg 77 119 open $1;
#X text 4 -3 This patch works with the example Arduino firmware of
the same name.;
#X text 9 552 CAUTION! Watch out if you connect your potentiometer
without an extra resistor , when you turn it all the way up , the
full voltage and current will go to the input. This could fry your
board!;
#X obj 79 357 +;
#X obj 78 259 trigger float bang;
#X obj 95 318 float;
#X obj 95 337 * 10;
#X obj 176 345 float;
#X msg 196 290 0;
#X text 250 459 ASCII for A B C D E F;
#X obj 77 235 - 48;
#X obj 79 460 route 65 66 67 68 69 70;
#X obj 79 378 trigger bang float;
#X obj 79 417 float;
#X obj 247 386 float;
#X obj 79 440 pack float float;
#X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10
-3754 -1 -1 0 256;
#X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10
-3754 -1 -1 10 256;
#X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10
-3754 -1 -1 98 256;
#X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10
-3754 -1 -1 158 256;
#X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10
-3754 -1 -1 623 256;
#X obj 320 511 print ERRANT_VALUE;
#X obj 247 250 float;
#X obj 77 211 moses 58;
#X text 84 88 (sometimes it takes up to 10 seconds to close the serial
port , if things are running fast);
#X text 181 121 <-- close before uploading a new firmware!;
#X obj 77 188 comport 1 19200;
#X connect 3 0 33 0;
#X connect 4 0 33 0;
#X connect 6 0 7 0;
#X connect 7 0 33 0;
#X connect 10 0 14 0;
#X connect 10 0 19 0;
#X connect 11 0 10 0;
#X connect 11 1 12 0;
#X connect 12 0 13 0;
#X connect 13 0 10 1;
#X connect 14 0 12 1;
#X connect 15 0 12 1;
#X connect 17 0 11 0;
#X connect 18 0 5 0;
#X connect 18 1 23 0;
#X connect 18 2 24 0;
#X connect 18 3 25 0;
#X connect 18 4 26 0;
#X connect 18 5 27 0;
#X connect 18 6 28 0;
#X connect 19 0 20 0;
#X connect 19 1 22 1;
#X connect 20 0 22 0;
#X connect 21 0 20 1;
#X connect 22 0 18 0;
#X connect 29 0 15 0;
#X connect 29 0 21 0;
#X connect 30 0 17 0;
#X connect 30 1 29 0;
#X connect 33 0 30 0;
Index: PD_send_potentiometer.pd
===================================================================
RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_send_potentiometer.pd,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** PD_send_potentiometer.pd	4 Mar 2006 22:21:55 -0000	1.1
--- PD_send_potentiometer.pd	5 Mar 2006 06:48:01 -0000	1.2
***************
*** 1,15 ****
! #N canvas 66 362 494 354 10;
! #X text 153 122 On Mac OS X , set this to the right value:;
! #X obj 103 182 comport 1 9600;
! #X text 30 11 You might need to select another port , check the Pd
  window to see if it connected successfully:;
! #X msg 163 87 close;
! #X msg 157 139 devicename /dev/tty.usbserial-191;
! #X obj 102 215 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 79 256;
! #X text 36 252 CAUTION! Watch out if you connect your potentiometer
! without an extra resistor , when you turn it all the way up , the
! full voltage and currrent will go to the input. This could kill your
! board!;
  #N canvas 162 133 518 368 serin 0;
  #X obj 160 101 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
--- 1,11 ----
! #N canvas 66 362 498 358 10;
! #X text 151 136 On Mac OS X , set this to the right value:;
! #X obj 101 196 comport 1 9600;
! #X text 28 25 You might need to select another port , check the Pd
  window to see if it connected successfully:;
! #X msg 161 101 close;
! #X msg 155 153 devicename /dev/tty.usbserial-191;
! #X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 13 256;
  #N canvas 162 133 518 368 serin 0;
  #X obj 160 101 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
***************
*** 30,41 ****
  #X connect 7 0 6 0;
  #X coords 0 -1 1 1 76 17 1 100 100;
! #X restore 103 61 pd serin;
! #X msg 103 86 open $1;
! #X text 184 62 serial port #;
! #X text 30 -20 This patch works with the example Arduino firmware of
  the same name.;
  #X connect 1 0 5 0;
  #X connect 3 0 1 0;
  #X connect 4 0 1 0;
! #X connect 7 0 8 0;
! #X connect 8 0 1 0;
--- 26,41 ----
  #X connect 7 0 6 0;
  #X coords 0 -1 1 1 76 17 1 100 100;
! #X restore 101 75 pd serin;
! #X msg 101 100 open $1;
! #X text 182 76 serial port #;
! #X text 28 -6 This patch works with the example Arduino firmware of
  the same name.;
+ #X text 34 266 CAUTION! Watch out if you connect your potentiometer
+ without an extra resistor , when you turn it all the way up , the
+ full voltage and current will go to the input. This could kill your
+ board!;
  #X connect 1 0 5 0;
  #X connect 3 0 1 0;
  #X connect 4 0 1 0;
! #X connect 6 0 7 0;
! #X connect 7 0 1 0;
--- NEW FILE: PD_two_potentiometers.pd ---
#N canvas 327 35 530 629 10;
#X obj 420 2 import zexy;
#X text 127 139 On Mac OS X , set this to the right value:;
#X obj 77 195 comport 1 9600;
#X text 5 42 You might need to select another port , check the Pd
window to see if it connected successfully:;
#X msg 137 104 close;
#X msg 131 156 devicename /dev/tty.usbserial-191;
#X obj 111 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15
30 1 14 -3754 -1 -1 0 256;
#N canvas 162 133 518 368 serin 0;
#X obj 160 101 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
-1 0;
#X obj 241 251 s $0-number-canvas;
#X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
-1 0;
#X obj 101 134 + 1;
#X obj 100 173 outlet;
#X obj 101 39 inlet;
#X msg 241 228 label $1;
#X obj 241 206 makefilename %d;
#X connect 2 0 3 0;
#X connect 3 0 4 0;
#X connect 3 0 7 0;
#X connect 5 0 2 0;
#X connect 6 0 1 0;
#X connect 7 0 6 0;
#X coords 0 -1 1 1 76 17 1 100 100;
#X restore 77 78 pd serin;
#X msg 77 103 open $1;
#X text 158 79 serial port #;
#X text 4 -3 This patch works with the example Arduino firmware of
the same name.;
#X text 6 550 CAUTION! Watch out if you connect your potentiometer
without an extra resistor , when you turn it all the way up , the
full voltage and current will go to the input. This could fry your
board!;
#X obj 156 246 makefilename %c;
#X obj 77 225 select 13 10;
#X text 266 246 <-- convert integer to ASCII;
#X obj 223 424 +;
#X obj 193 470 float;
#X obj 221 315 trigger float bang;
#X obj 239 385 float;
#X obj 239 404 * 10;
#X obj 221 289 symbol2list;
#X obj 320 412 float;
#X msg 164 337 0;
#X obj 150 470 float;
#X text 197 339 <-- reset for the next pot reading;
#X text 303 285 <-- converts the ASCII digit;
#X text 332 297 symbol to a float;
#X text 169 225 <-- filter out newline characters;
#X obj 156 267 select B A;
#X obj 209 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15
30 1 14 -3754 -1 -1 0 256;
#X connect 2 0 13 0;
#X connect 4 0 2 0;
#X connect 5 0 2 0;
#X connect 7 0 8 0;
#X connect 8 0 2 0;
#X connect 12 0 28 0;
#X connect 13 2 12 0;
#X connect 15 0 16 1;
#X connect 15 0 21 0;
#X connect 15 0 23 1;
#X connect 16 0 29 0;
#X connect 17 0 15 0;
#X connect 17 1 18 0;
#X connect 18 0 19 0;
#X connect 19 0 15 1;
#X connect 20 0 17 0;
#X connect 21 0 18 1;
#X connect 22 0 18 1;
#X connect 23 0 6 0;
#X connect 28 0 22 0;
#X connect 28 0 23 0;
#X connect 28 1 22 0;
#X connect 28 1 16 0;
#X connect 28 2 20 0;