Revision: 10605 http://pure-data.svn.sourceforge.net/pure-data/?rev=10605&view=rev Author: mukau Date: 2009-01-23 21:26:14 +0000 (Fri, 23 Jan 2009)

Log Message: ----------- + added locale/ : basic C99 locale support

Added Paths: ----------- trunk/externals/moocow/locale/ trunk/externals/moocow/locale/COPYING trunk/externals/moocow/locale/Changes trunk/externals/moocow/locale/Makefile.am trunk/externals/moocow/locale/Makefile.in trunk/externals/moocow/locale/README.cvs trunk/externals/moocow/locale/README.pod trunk/externals/moocow/locale/README.txt trunk/externals/moocow/locale/aclocal.m4 trunk/externals/moocow/locale/autogen.sh trunk/externals/moocow/locale/config/ trunk/externals/moocow/locale/config/Makefile.am trunk/externals/moocow/locale/config/Makefile.in trunk/externals/moocow/locale/config/depcomp trunk/externals/moocow/locale/config/install-sh trunk/externals/moocow/locale/config/missing trunk/externals/moocow/locale/configure trunk/externals/moocow/locale/configure.ac trunk/externals/moocow/locale/src/ trunk/externals/moocow/locale/src/Makefile.am trunk/externals/moocow/locale/src/Makefile.in trunk/externals/moocow/locale/src/config.h.in trunk/externals/moocow/locale/src/locale-help.pd trunk/externals/moocow/locale/src/locale-test.pd trunk/externals/moocow/locale/src/locale.c

Property changes on: trunk/externals/moocow/locale ___________________________________________________________________ Added: svn:ignore + *~ .*~ *.gz .cvsignore Makefile .libs .deps autom4te.cache config.log config.status config.cache

Added: trunk/externals/moocow/locale/COPYING =================================================================== --- trunk/externals/moocow/locale/COPYING (rev 0) +++ trunk/externals/moocow/locale/COPYING 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,290 @@ +GNU GENERAL PUBLIC LICENSE + +Version 2, June 1991 + +Copyright (C) 1989, 1991 Free Software Foundation, Inc. +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. + +Preamble + +The licenses for most software are designed to take away your freedom +to share and change it. By contrast, the GNU General Public License is +intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This General +Public License applies to most of the Free Software Foundation's +software and to any other program whose authors commit to using it. +(Some other Free Software Foundation software is covered by the +GNU Library General Public License instead.) You can apply it to your +programs, too. + +When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new free +programs; and that you know you can do these things. + +To protect your rights, we need to make restrictions that forbid anyone +to deny you these rights or to ask you to surrender the rights. These +restrictions translate to certain responsibilities for you if you distribute +copies of the software, or if you modify it. + +For example, if you distribute copies of such a program, whether gratis +or for a fee, you must give the recipients all the rights that you have. You +must make sure that they, too, receive or can get the source code. And +you must show them these terms so they know their rights. + +We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + +Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, +we want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + +Finally, any free program is threatened constantly by software patents. +We wish to avoid the danger that redistributors of a free program will +individually obtain patent licenses, in effect making the program +proprietary. To prevent this, we have made it clear that any patent must +be licensed for everyone's free use or not licensed at all. + +The precise terms and conditions for copying, distribution and +modification follow. + +TERMS AND CONDITIONS FOR +COPYING, DISTRIBUTION AND +MODIFICATION + +0. This License applies to any program or other work which contains a +notice placed by the copyright holder saying it may be distributed under +the terms of this General Public License. The "Program", below, refers +to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, either +verbatim or with modifications and/or translated into another language. +(Hereinafter, translation is included without limitation in the term +"modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of running +the Program is not restricted, and the output from the Program is +covered only if its contents constitute a work based on the Program +(independent of having been made by running the Program). Whether +that is true depends on what the Program does. + +1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the notices +that refer to this License and to the absence of any warranty; and give +any other recipients of the Program a copy of this License along with the +Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide a + warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but does + not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, and +can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based on +the Program, the distribution of the whole must be on the terms of this +License, whose permissions for other licensees extend to the entire +whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest your +rights to work written entirely by you; rather, the intent is to exercise the +right to control the distribution of derivative or collective works based +on the Program. + +In addition, mere aggregation of another work not based on the +Program with the Program (or with a work based on the Program) on a +volume of a storage or distribution medium does not bring the other +work under the scope of this License. + +3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding + machine-readable source code, which must be distributed under + the terms of Sections 1 and 2 above on a medium customarily + used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your cost + of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a + medium customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with + such an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to control +compilation and installation of the executable. However, as a special +exception, the source code distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies the +executable. + +If distribution of executable or object code is made by offering access to +copy from a designated place, then offering equivalent access to copy +the source code from the same place counts as distribution of the source +code, even though third parties are not compelled to copy the source +along with the object code. + +4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt otherwise +to copy, modify, sublicense or distribute the Program is void, and will +automatically terminate your rights under this License. However, parties +who have received copies, or rights, from you under this License will not +have their licenses terminated so long as such parties remain in full +compliance. + +5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and all +its terms and conditions for copying, distributing or modifying the +Program or works based on it. + +6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the original +licensor to copy, distribute or modify the Program subject to these terms +and conditions. You may not impose any further restrictions on the +recipients' exercise of the rights granted herein. You are not responsible +for enforcing compliance by third parties to this License. + +7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot distribute +so as to satisfy simultaneously your obligations under this License and +any other pertinent obligations, then as a consequence you may not +distribute the Program at all. For example, if a patent license would not +permit royalty-free redistribution of the Program by all those who +receive copies directly or indirectly through you, then the only way you +could satisfy both it and this License would be to refrain entirely from +distribution of the Program. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any patents +or other property right claims or to contest validity of any such claims; +this section has the sole purpose of protecting the integrity of the free +software distribution system, which is implemented by public license +practices. Many people have made generous contributions to the wide +range of software distributed through that system in reliance on +consistent application of that system; it is up to the author/donor to +decide if he or she is willing to distribute software through any other +system and a licensee cannot impose that choice. + +This section is intended to make thoroughly clear what is believed to be +a consequence of the rest of this License. + +8. If the distribution and/or use of the Program is restricted in certain +countries either by patents or by copyrighted interfaces, the original +copyright holder who places the Program under this License may add an +explicit geographical distribution limitation excluding those countries, so +that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + +9. The Free Software Foundation may publish revised and/or new +versions of the General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may differ in +detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number +of this License, you may choose any version ever published by the Free +Software Foundation. + +10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we +sometimes make exceptions for this. Our decision will be guided by the +two goals of preserving the free status of all derivatives of our free +software and of promoting the sharing and reuse of software generally. + +NO WARRANTY + +11. BECAUSE THE PROGRAM IS LICENSED FREE OF +CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, +TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT +WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE +PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, +EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND +PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD +THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE +COST OF ALL NECESSARY SERVICING, REPAIR OR +CORRECTION. + +12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW +OR AGREED TO IN WRITING WILL ANY COPYRIGHT +HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED +ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING +ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR +INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT +LIMITED TO LOSS OF DATA OR DATA BEING RENDERED +INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE +WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR +OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY +OF SUCH DAMAGES. + +END OF TERMS AND CONDITIONS

Added: trunk/externals/moocow/locale/Changes =================================================================== --- trunk/externals/moocow/locale/Changes (rev 0) +++ trunk/externals/moocow/locale/Changes 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,4 @@ +Change log for PD external 'locale' + +v0.01 Fri, 23 Jan 2009 22:22:02 +0100 + + initial version

Added: trunk/externals/moocow/locale/Makefile.am =================================================================== --- trunk/externals/moocow/locale/Makefile.am (rev 0) +++ trunk/externals/moocow/locale/Makefile.am 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,98 @@ +# File: ./Makefile.am +# Package: readdir +# Description: +# + top-level automake file +# +# Process this file with Automake to create Makefile.in. +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# Options & Subdirectories +#----------------------------------------------------------------------- + +## --- automake options +#AUTOMAKE_OPTIONS = foreign dist-bzip2 dist-zip +AUTOMAKE_OPTIONS = foreign + +## --- recursion subdirectories +SUBDIRS = config src + +## --- pseudo-deps for '.SUFFIXES' +SUFFIXES = .pod .txt + +#----------------------------------------------------------------------- +# Variables: cleanup +#----------------------------------------------------------------------- +## --- mostlyclean: built by 'make' & commonly rebuilt +#MOSTLYCLEANFILES = + +## --- clean: built by 'make' +#CLEANFILES = + +## --- distclean: built by 'configure' +DISTCLEANFILES = \ + config.log \ + config.cache \ + config.status + +## -- maintainerclean: built by maintainer / by hand +MAINTAINERCLEANFILES = *~ \ + $(PODS:.pod=.txt) \ + Makefile Makefile.in \ + aclocal.m4 \ + configure \ + install-sh \ + stamp-h.in \ + config.h.in + +maintainer-clean-local: + rm -rf autom4te.cache + +#CVSCLEAN_SUBDIRS = $(SUBDIRS) + +#CVSCLEANFILES = Makefile.in Makefile + + +#----------------------------------------------------------------------- +# Additional Variables & Rules: PODS +#----------------------------------------------------------------------- +PODS = README.pod + +.pod.txt: + pod2text $< $@ + +all-local: $(PODS:.pod=.txt) + +#----------------------------------------------------------------------- +# Variables: distribution +#----------------------------------------------------------------------- + +## --- extra distribution files +EXTRA_DIST = \ + $(PODS:.pod=.txt) autogen.sh configure \ + README.cvs COPYING + +## --- recursion subdirectories for 'make dist' +#DIST_SUBDIRS = $(SUBDIRS) + +## --- dist-hook: when another 'Makefile.am' is overkill +#DISTHOOK_DIRS = foo +#DISTHOOK_FILES = foo/bar.txt foo/baz.txt +#dist-hook: +# for d in $(DISTHOOK_DIRS); do\ +# mkdir -p $(distdir)/$$d ;\ +# done +# for f in $(DISTHOOK_FILES); do\ +# cp -p $(srcdir)/$$f $(distdir)/$$f ;\ +# done + +#dist-bz2: dist-bzip2 ; + + +#----------------------------------------------------------------------- +# Rules: cleanup +#----------------------------------------------------------------------- +.PHONY: cvsclean cvsclean-hook + +cvsclean: maintainer-clean ; +

Added: trunk/externals/moocow/locale/Makefile.in =================================================================== --- trunk/externals/moocow/locale/Makefile.in (rev 0) +++ trunk/externals/moocow/locale/Makefile.in 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,656 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# File: ./Makefile.am +# Package: readdir +# Description: +# + top-level automake file +# +# Process this file with Automake to create Makefile.in. +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# Options & Subdirectories +#----------------------------------------------------------------------- +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/configure COPYING +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/src/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AFLAGS = @AFLAGS@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUGREPORT = @BUGREPORT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEBUG = @DEBUG@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DFLAGS = @DFLAGS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +IFLAGS = @IFLAGS@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LFLAGS = @LFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +OFLAGS = @OFLAGS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PDEXT = @PDEXT@ +PD_OBJECT_EXTERNALS = @PD_OBJECT_EXTERNALS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +WFLAGS = @WFLAGS@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pddir = @pddir@ +pddocdir = @pddocdir@ +pdexternsdir = @pdexternsdir@ +pdfdir = @pdfdir@ +pdincludedir = @pdincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ + +#AUTOMAKE_OPTIONS = foreign dist-bzip2 dist-zip +AUTOMAKE_OPTIONS = foreign +SUBDIRS = config src +SUFFIXES = .pod .txt + +#----------------------------------------------------------------------- +# Variables: cleanup +#----------------------------------------------------------------------- +#MOSTLYCLEANFILES = + +#CLEANFILES = +DISTCLEANFILES = \ + config.log \ + config.cache \ + config.status + +MAINTAINERCLEANFILES = *~ \ + $(PODS:.pod=.txt) \ + Makefile Makefile.in \ + aclocal.m4 \ + configure \ + install-sh \ + stamp-h.in \ + config.h.in + + +#CVSCLEAN_SUBDIRS = $(SUBDIRS) + +#CVSCLEANFILES = Makefile.in Makefile + +#----------------------------------------------------------------------- +# Additional Variables & Rules: PODS +#----------------------------------------------------------------------- +PODS = README.pod + +#----------------------------------------------------------------------- +# Variables: distribution +#----------------------------------------------------------------------- +EXTRA_DIST = \ + $(PODS:.pod=.txt) autogen.sh configure \ + README.cvs COPYING + +all: all-recursive + +.SUFFIXES: +.SUFFIXES: .pod .txt +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} ; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} ; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} ; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} ; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\/]:[\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile all-local +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic \ + maintainer-clean-local + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local \ + am--refresh check check-am clean clean-generic clean-recursive \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distclean-recursive distclean-tags \ + distcleancheck distdir distuninstallcheck dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic maintainer-clean-local \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-info-am + + +maintainer-clean-local: + rm -rf autom4te.cache + +.pod.txt: + pod2text $< $@ + +all-local: $(PODS:.pod=.txt) + +#DIST_SUBDIRS = $(SUBDIRS) + +#DISTHOOK_DIRS = foo +#DISTHOOK_FILES = foo/bar.txt foo/baz.txt +#dist-hook: +# for d in $(DISTHOOK_DIRS); do\ +# mkdir -p $(distdir)/$$d ;\ +# done +# for f in $(DISTHOOK_FILES); do\ +# cp -p $(srcdir)/$$f $(distdir)/$$f ;\ +# done + +#dist-bz2: dist-bzip2 ; + +#----------------------------------------------------------------------- +# Rules: cleanup +#----------------------------------------------------------------------- +.PHONY: cvsclean cvsclean-hook + +cvsclean: maintainer-clean ; +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT:

Added: trunk/externals/moocow/locale/README.cvs =================================================================== --- trunk/externals/moocow/locale/README.cvs (rev 0) +++ trunk/externals/moocow/locale/README.cvs 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,13 @@ +To build from cvs, do the following: + + ./autogen.sh + ./configure + make + make install + +NOTE: The README.txt file in the distribution +is auto-generated from perl ".pod" format by +the "pod2text" included in most perl distributions. + +marmosets, + Bryan

Added: trunk/externals/moocow/locale/README.pod =================================================================== --- trunk/externals/moocow/locale/README.pod (rev 0) +++ trunk/externals/moocow/locale/README.pod 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,48 @@ +=pod + +README for pd external 'locale' + +Last updated for locale v0.01 + +=head1 DESCRIPTION + +The 'locale' object provides access to the internationalization facilities in locale.h + +=head1 INSTALLATION + +Issue the following commands to the shell: + + cd locale-X.YY (or wherever you extracted the distribution) + ./configure + make + make install + +=head1 BUILD OPTIONS + +The 'configure' script supports the following options, among others: + +=over 4 + +=item * --enable-debug , --disable-debug + +Whether to enable verbose debugging messages. +Default=no. + +=back + +=head1 ACKNOWLEDGEMENTS + +PD by Miller Puckette and others. + +Ideas, black magic, and other nuggets of information drawn +from code by Guenter Geiger, Larry Troxler, and iohannes m zmoelnig. + +=head1 KNOWN BUGS + +Injudicious use of the "set" method can confuse Pd float-parsing +mechanisms. See locale-help.pd for details. + +=head1 AUTHOR + +Bryan Jurish E<lt>moocow@ling.uni-potsdam.deE<gt> +

Added: trunk/externals/moocow/locale/README.txt =================================================================== --- trunk/externals/moocow/locale/README.txt (rev 0) +++ trunk/externals/moocow/locale/README.txt 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,35 @@ + README for pd external 'locale' + + Last updated for locale v0.01 + +DESCRIPTION + The 'locale' object provides access to the internationalization + facilities in locale.h + +INSTALLATION + Issue the following commands to the shell: + + cd locale-X.YY (or wherever you extracted the distribution) + ./configure + make + make install + +BUILD OPTIONS + The 'configure' script supports the following options, among others: + + * --enable-debug , --disable-debug + Whether to enable verbose debugging messages. Default=no. + +ACKNOWLEDGEMENTS + PD by Miller Puckette and others. + + Ideas, black magic, and other nuggets of information drawn from code by + Guenter Geiger, Larry Troxler, and iohannes m zmoelnig. + +KNOWN BUGS + Injudicious use of the "set" method can confuse Pd float-parsing + mechanisms. See locale-help.pd for details. + +AUTHOR + Bryan Jurish moocow@ling.uni-potsdam.de +

Added: trunk/externals/moocow/locale/aclocal.m4 =================================================================== --- trunk/externals/moocow/locale/aclocal.m4 (rev 0) +++ trunk/externals/moocow/locale/aclocal.m4 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,862 @@ +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*(.*)"` +# and then we would define $MISSING as +# MISSING="${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*([a-zA-Z0-9]*))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with ), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote(.*(DEPDIR).*)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/$(DEPDIR)/'"$DEPDIR"'/g' -e 's/$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote=""" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="${SHELL} $(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR +

Added: trunk/externals/moocow/locale/autogen.sh =================================================================== --- trunk/externals/moocow/locale/autogen.sh (rev 0) +++ trunk/externals/moocow/locale/autogen.sh 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,48 @@ +#!/bin/sh + +#----------------------------------------------------------------------- +# File: autogen.sh +# Description: +# + wrapper for m4 black-magic +#----------------------------------------------------------------------- + +MY_ALDIRS="." +MY_AHDIRS="." +MY_AMDIRS="." +MY_ACDIRS="." + +test -z "$ACLOCAL" && ACLOCAL=aclocal +test -z "$AUTOHEADER" && AUTOHEADER=autoheader +test -z "$AUTOMAKE" && AUTOMAKE=automake +test -z "$AUTOCONF" && AUTOCONF=autoconf + +if test -n "$MY_ALDIRS"; then + for d in $MY_ALDIRS ; do + echo "(cd $d ; $ACLOCAL)" + (cd $d ; $ACLOCAL) + done +fi + +if test -n "$MY_AHDIRS"; then + for d in $MY_AHDIRS ; do + echo "(cd $d ; $AUTOHEADER)" + (cd $d ; $AUTOHEADER) + done +fi + +if test -n "$MY_AMDIRS"; then + for d in $MY_AMDIRS ; do + echo "(cd $d ; $AUTOMAKE -a -c)" + (cd $d ; $AUTOMAKE -a -c) + done +fi + +if test -n "$MY_ACDIRS"; then + for d in $MY_ACDIRS ; do + echo "(cd $d ; $AUTOCONF)" + (cd $d ; $AUTOCONF) + done +fi + +#echo "(./configure)" +#./configure $*

Property changes on: trunk/externals/moocow/locale/autogen.sh ___________________________________________________________________ Added: svn:executable + *

Property changes on: trunk/externals/moocow/locale/config ___________________________________________________________________ Added: svn:ignore + Makefile *~ .*~

Added: trunk/externals/moocow/locale/config/Makefile.am =================================================================== --- trunk/externals/moocow/locale/config/Makefile.am (rev 0) +++ trunk/externals/moocow/locale/config/Makefile.am 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,66 @@ +## File: config/Makefile.am +## Package: readdir +## Description: +## + automake file for 'config' package-subdir +## +## Process this file with Automake to create Makefile.in. +##----------------------------------------------------------------------- + +##----------------------------------------------------------------------- +## Variables: options +##----------------------------------------------------------------------- + +##----------------------------------------------------------------------- +## Variables: cleanup +##----------------------------------------------------------------------- + +## --- mostlyclean: built by 'make' & commonly rebuilt +#MOSTLYCLEANFILES = + +## --- clean: built by 'make' +#CLEANFILES = + +## --- distclean: built by 'configure' +#DISTCLEANFILES = + +## -- maintainerclean: built by maintainer / by hand +MAINTAINERCLEANFILES = \ + *~ .*~ \ + compile Makefile Makefile.in \ + config.guess \ + config.sub \ + depcomp \ + install-sh \ + ltmain.sh \ + missing \ + mkinstalldirs \ + texinfo.tex \ + ylwrap + + +##----------------------------------------------------------------------- +## Variables: distribution +##----------------------------------------------------------------------- + +## --- extra distribution files +EXTRA_DIST = \ + Makefile.in \ + depcomp \ + install-sh \ + $(wildcard mkinstalldirs) \ + missing + +# config.guess +# config.sub +# ltmain.sh +# texinfo.tex + +## --- recursion subdirectories for 'make dist' +#DIST_SUBDIRS = $(SUBDIRS) + +#----------------------------------------------------------------------- +# Rules: cleanup +#----------------------------------------------------------------------- +.PHONY: cvsclean cvsclean-hook + +cvsclean: maintainer-clean ;

Added: trunk/externals/moocow/locale/config/Makefile.in =================================================================== --- trunk/externals/moocow/locale/config/Makefile.in (rev 0) +++ trunk/externals/moocow/locale/config/Makefile.in 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,332 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +#MOSTLYCLEANFILES = + +#CLEANFILES = + +#DISTCLEANFILES = +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = config +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in depcomp \ + install-sh missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/src/config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AFLAGS = @AFLAGS@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUGREPORT = @BUGREPORT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEBUG = @DEBUG@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DFLAGS = @DFLAGS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +IFLAGS = @IFLAGS@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LFLAGS = @LFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +OFLAGS = @OFLAGS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PDEXT = @PDEXT@ +PD_OBJECT_EXTERNALS = @PD_OBJECT_EXTERNALS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +WFLAGS = @WFLAGS@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pddir = @pddir@ +pddocdir = @pddocdir@ +pdexternsdir = @pdexternsdir@ +pdfdir = @pdfdir@ +pdincludedir = @pdincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +MAINTAINERCLEANFILES = \ + *~ .*~ \ + compile Makefile Makefile.in \ + config.guess \ + config.sub \ + depcomp \ + install-sh \ + ltmain.sh \ + missing \ + mkinstalldirs \ + texinfo.tex \ + ylwrap + +EXTRA_DIST = \ + Makefile.in \ + depcomp \ + install-sh \ + mkinstalldirs \ + missing + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu config/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu config/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +uninstall-info-am: +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-info-am + + +# config.guess +# config.sub +# ltmain.sh +# texinfo.tex + +#DIST_SUBDIRS = $(SUBDIRS) + +#----------------------------------------------------------------------- +# Rules: cleanup +#----------------------------------------------------------------------- +.PHONY: cvsclean cvsclean-hook + +cvsclean: maintainer-clean ; +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT:

Added: trunk/externals/moocow/locale/config/depcomp =================================================================== --- trunk/externals/moocow/locale/config/depcomp (rev 0) +++ trunk/externals/moocow/locale/config/depcomp 2009-01-23 21:26:14 UTC (rev 10605) @@ -0,0 +1,530 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva oliva@dcc.unicamp.br. + +case $1 in + '') + echo "$0: No command. Try `$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to bug-automake@gnu.org. +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\/]*$|'${DEPDIR-.deps}'/&|;s|.([^.]*)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/.([^.]*)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/(.*)..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: (.*)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h ', or ` dep3.h dep4.h '. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: (.*)$,\1,;s/^\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/.o$//' -e 's/.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*:[ ]*:'"$object"': :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;;

@@ Diff output truncated at 100000 characters. @@

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.