Update of /cvsroot/pure-data/externals/pidip In directory sc8-pr-cvs1:/tmp/cvs-serv17888

Modified Files: CHANGES.LOG INSTALL KNOWN.BUGS Makefile Makefile.in acinclude.m4 aclocal.m4 config.log config.status configure configure.ac configure.in Log Message: PiDiP 0.12.11

Index: CHANGES.LOG =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/CHANGES.LOG,v retrieving revision 1.11 retrieving revision 1.12 diff -C2 -d -r1.11 -r1.12 *** CHANGES.LOG 29 Oct 2003 22:43:43 -0000 1.11 --- CHANGES.LOG 8 Dec 2003 22:45:54 -0000 1.12 *************** *** 1,2 **** --- 1,10 ---- + 0.12.12 + added offsets messages in pdp_pen + 0.12.11 + added pdp_charcoal to the effect rack : charcoal effect using edge detection, blur, normalization and negate + ( it's an abstraction using basic pdp_objects ) + fixed compilation problem with latest ffmpeg ( AVFMT_NOHEADER --> AVFMTCTX_NOHEADER ) + commented pdp_aa : it introduces useless dependencies ( aalib ) and is not very good + added pdp_ocanvas : canvas with some overlay 0.12.10 fixed crashes and 'resize' bug in pdp_text

Index: INSTALL =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/INSTALL,v retrieving revision 1.3 retrieving revision 1.4 diff -C2 -d -r1.3 -r1.4 *** INSTALL 23 Oct 2003 17:15:11 -0000 1.3 --- INSTALL 8 Dec 2003 22:45:54 -0000 1.4 *************** *** 2,6 ****

imlib2 ( http://sourceforge.net/project/showfiles.php?group_id=2 ) - aalib (http://aa-project.sourceforge.net/aalib/) Image Magick ( http://www.imagemagick.org ) ----> watchout !! configure with --enable-shared --- 2,5 ----

Index: KNOWN.BUGS =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/KNOWN.BUGS,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** KNOWN.BUGS 11 Aug 2003 04:26:00 -0000 1.1 --- KNOWN.BUGS 8 Dec 2003 22:45:54 -0000 1.2 *************** *** 1,2 **** pdp_live~ : requires a huge block size to operate ( otherwise, sound is shitty ) ! pdp_capture : does not capture certain types of windows ( xvideo, frame buffers ) --- 1,2 ---- pdp_live~ : requires a huge block size to operate ( otherwise, sound is shitty ) ! pdp_capture : does not capture certain types of windows ( xvideo, frame buffers ) + crashes when changing values dynamically

Index: Makefile =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/Makefile,v retrieving revision 1.3 retrieving revision 1.4 diff -C2 -d -r1.3 -r1.4 *** Makefile 23 Oct 2003 17:15:34 -0000 1.3 --- Makefile 8 Dec 2003 22:45:54 -0000 1.4 *************** *** 1,3 **** - # Generated automatically from Makefile.in by configure. PD_DIR = /usr/local/pd PDP_DIR = /usr/local/pd/pdp --- 1,2 ---- *************** *** 7,15 **** IMLIB_CFLAGS = -I/usr/local/include -I/usr/X11R6/include IMLIB_LIBS = -L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib - AALIB_CFLAGS = -I/usr/local/include - AALIB_LIBS = -L/usr/local/lib -Wl,-rpath,/usr/local/lib -laa -lm -L/usr/X11R6/lib -lX11 -lgpm -lslang MAGICK_CFLAGS = -I/usr/X11R6/include -g -O2 -Wall MAGICK_LIBS = -L/usr/X11R6/lib -lMagick -lMagick -ltiff -lfreetype -ljasper -ljpeg -lpng -lXext -lSM -lICE -lX11 -lbz2 -lxml2 -lz -lpthread -lm -L/usr/local/lib -L/usr/X11R6/lib -L/usr/X11R6/lib -L/usr/local/lib ! PDP_PIDIP_VERSION = 0.12.10

PDP_PIDIP_DISTRO = /mnt/c/ydegoyon.free.fr/pidip-$(PDP_PIDIP_VERSION) --- 6,12 ---- IMLIB_CFLAGS = -I/usr/local/include -I/usr/X11R6/include IMLIB_LIBS = -L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib MAGICK_CFLAGS = -I/usr/X11R6/include -g -O2 -Wall MAGICK_LIBS = -L/usr/X11R6/lib -lMagick -lMagick -ltiff -lfreetype -ljasper -ljpeg -lpng -lXext -lSM -lICE -lX11 -lbz2 -lxml2 -lz -lpthread -lm -L/usr/local/lib -L/usr/X11R6/lib -L/usr/X11R6/lib -L/usr/local/lib ! PDP_PIDIP_VERSION = 0.12.12

PDP_PIDIP_DISTRO = /mnt/c/ydegoyon.free.fr/pidip-$(PDP_PIDIP_VERSION) *************** *** 18,22 ****

PDP_PIDIP_INCLUDE = -I$(PD_DIR)/src -I. -I$(PDP_DIR)/include -I$(FFMPEG_SOURCE_DIR)/libavcodec -I$(FFMPEG_SOURCE_DIR)/libavformat -I../include ! PDP_PIDIP_CFLAGS = $(MAGICK_CFLAGS) $(AALIB_CFLAGS) $(IMLIB_CFLAGS) \ -DPD -DX_DISPLAY_MISSING -O2 -funroll-loops -fomit-frame-pointer -ffast-math \ -Wall -W -Wstrict-prototypes \ --- 15,19 ----

PDP_PIDIP_INCLUDE = -I$(PD_DIR)/src -I. -I$(PDP_DIR)/include -I$(FFMPEG_SOURCE_DIR)/libavcodec -I$(FFMPEG_SOURCE_DIR)/libavformat -I../include ! PDP_PIDIP_CFLAGS = $(MAGICK_CFLAGS) $(IMLIB_CFLAGS) \ -DPD -DX_DISPLAY_MISSING -O2 -funroll-loops -fomit-frame-pointer -ffast-math \ -Wall -W -Wstrict-prototypes \ *************** *** 34,38 **** pidip.pd_linux: pdp_pidip_all rm -f pidip.pd_linux ! gcc -export_dynamic -shared -o pidip.pd_linux modules/*.o system/*.o $(FFMPEG_SOURCE_DIR)/libavformat/libavformat.a $(FFMPEG_SOURCE_DIR)/libavcodec/libavcodec.a $(LIBS) $(IMLIB_LIBS) $(AALIB_LIBS) $(MAGICK_LIBS)

clean: --- 31,35 ---- pidip.pd_linux: pdp_pidip_all rm -f pidip.pd_linux ! gcc -export_dynamic -shared -o pidip.pd_linux modules/*.o system/*.o $(FFMPEG_SOURCE_DIR)/libavformat/libavformat.a $(FFMPEG_SOURCE_DIR)/libavcodec/libavcodec.a $(LIBS) $(IMLIB_LIBS) $(MAGICK_LIBS)

clean:

Index: Makefile.in =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/Makefile.in,v retrieving revision 1.2 retrieving revision 1.3 diff -C2 -d -r1.2 -r1.3 *** Makefile.in 17 Sep 2003 19:53:57 -0000 1.2 --- Makefile.in 8 Dec 2003 22:45:54 -0000 1.3 *************** *** 6,11 **** IMLIB_CFLAGS = @IMLIB_CFLAGS@ IMLIB_LIBS = @IMLIB_LIBS@ - AALIB_CFLAGS = @AALIB_CFLAGS@ - AALIB_LIBS = @AALIB_LIBS@ MAGICK_CFLAGS = @MAGICK_CFLAGS@ MAGICK_LIBS = @MAGICK_LIBS@ --- 6,9 ---- *************** *** 17,21 ****

PDP_PIDIP_INCLUDE = -I$(PD_DIR)/src -I. -I$(PDP_DIR)/include -I$(FFMPEG_SOURCE_DIR)/libavcodec -I$(FFMPEG_SOURCE_DIR)/libavformat -I../include ! PDP_PIDIP_CFLAGS = $(MAGICK_CFLAGS) $(AALIB_CFLAGS) $(IMLIB_CFLAGS) \ -DPD -DX_DISPLAY_MISSING -O2 -funroll-loops -fomit-frame-pointer -ffast-math \ -Wall -W -Wstrict-prototypes \ --- 15,19 ----

PDP_PIDIP_INCLUDE = -I$(PD_DIR)/src -I. -I$(PDP_DIR)/include -I$(FFMPEG_SOURCE_DIR)/libavcodec -I$(FFMPEG_SOURCE_DIR)/libavformat -I../include ! PDP_PIDIP_CFLAGS = $(MAGICK_CFLAGS) $(IMLIB_CFLAGS) \ -DPD -DX_DISPLAY_MISSING -O2 -funroll-loops -fomit-frame-pointer -ffast-math \ -Wall -W -Wstrict-prototypes \ *************** *** 33,37 **** pidip.pd_linux: pdp_pidip_all rm -f pidip.pd_linux ! gcc -export_dynamic -shared -o pidip.pd_linux modules/*.o system/*.o $(FFMPEG_SOURCE_DIR)/libavformat/libavformat.a $(FFMPEG_SOURCE_DIR)/libavcodec/libavcodec.a $(LIBS) $(IMLIB_LIBS) $(AALIB_LIBS) $(MAGICK_LIBS)

clean: --- 31,35 ---- pidip.pd_linux: pdp_pidip_all rm -f pidip.pd_linux ! gcc -export_dynamic -shared -o pidip.pd_linux modules/*.o system/*.o $(FFMPEG_SOURCE_DIR)/libavformat/libavformat.a $(FFMPEG_SOURCE_DIR)/libavcodec/libavcodec.a $(LIBS) $(IMLIB_LIBS) $(MAGICK_LIBS)

clean:

Index: acinclude.m4 =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/acinclude.m4,v retrieving revision 1.4 retrieving revision 1.5 diff -C2 -d -r1.4 -r1.5

Index: aclocal.m4 =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/aclocal.m4,v retrieving revision 1.4 retrieving revision 1.5 diff -C2 -d -r1.4 -r1.5

Index: config.log =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/config.log,v retrieving revision 1.3 retrieving revision 1.4 diff -C2 -d -r1.3 -r1.4 *** config.log 29 Oct 2003 02:29:45 -0000 1.3 --- config.log 8 Dec 2003 22:45:54 -0000 1.4 *************** *** 2,30 **** running configure, to aid debugging if configure makes a mistake.

! configure:546: checking for strerror in -lcposix ! configure:590: checking for gcc ! configure:703: checking whether the C compiler (gcc ) works ! configure:719: gcc -o conftest conftest.c 1>&5 ! configure:745: checking whether the C compiler (gcc ) is a cross-compiler ! configure:750: checking whether we are using GNU C ! configure:778: checking whether gcc accepts -g ! configure:813: checking for gcc option to accept ANSI C ! configure:890: checking how to run the C preprocessor ! configure:970: checking for ANSI C header files ! configure:1104: checking for a BSD compatible install ! configure:1157: checking whether make sets ${MAKE} ! configure:1184: checking whether build environment is sane ! configure:1223: checking whether to enable maintainer-specific portions of Makefiles ! configure:1246: checking if malloc debugging is wanted ! configure:1301: checking for imlib2-config ! configure:1335: checking for imlib2 - version >= 1.0.0 ! configure:1454: checking for aalib-config ! configure:1488: checking for aalib - version >= 1.0.0 ! configure:1574: checking for XWindowByProperty in -lMagick ! configure:1622: checking for BZ2_bzBuffToBuffCompress in -lbz2 ! configure:1670: checking for deflate in -lz ! configure:1718: checking for dlopen in -ldl ! configure:1766: checking for InitMP3 in -lmp3lame ! configure:1814: checking for ogg_stream_init in -logg ! configure:1862: checking for vorbis_analysis_init in -lvorbis ! configure:1910: checking for vorbis_encode_setup_init in -lvorbisenc --- 2,486 ---- running configure, to aid debugging if configure makes a mistake.

! It was created by configure, which was ! generated by GNU Autoconf 2.58. Invocation command line was ! ! $ ./configure ! ! ## --------- ## ! ## Platform. ## ! ## --------- ## ! ! hostname = dhcp-132-100 ! uname -m = i686 ! uname -r = 2.5.7 ! uname -s = Linux ! uname -v = #18 SMP Thu Jul 3 02:12:40 CEST 2003 ! ! /usr/bin/uname -p = unknown ! /bin/uname -X = unknown ! ! /bin/arch = i686 ! /usr/bin/arch -k = unknown ! /usr/convex/getsysinfo = unknown ! hostinfo = unknown ! /bin/machine = unknown ! /usr/bin/oslevel = unknown ! /bin/universe = unknown ! ! PATH: /usr/local/sbin ! PATH: /usr/sbin ! PATH: /sbin ! PATH: /usr/local/sbin ! PATH: /usr/local/bin ! PATH: /sbin ! PATH: /bin ! PATH: /usr/sbin ! PATH: /usr/bin ! PATH: /usr/X11R6/bin ! PATH: /usr/local/java/bin ! PATH: /usr/local/bea/recyclers ! PATH: /usr/local/kde/bin ! PATH: /usr/lib/qt3/bin ! PATH: /usr/local/ant/bin ! PATH: /root/bin ! PATH: /usr/local/java/bin ! PATH: /usr/local/bea/recyclers ! PATH: /usr/local/kde/bin ! PATH: /usr/lib/qt3/bin ! PATH: /usr/local/ant/bin ! PATH: /usr/local/java/bin ! PATH: /usr/local/bea/recyclers ! PATH: /usr/local/kde/bin ! PATH: /usr/lib/qt3/bin ! PATH: /usr/local/ant/bin ! ! ! ## ----------- ## ! ## Core tests. ## ! ## ----------- ## ! ! configure:1311: checking for gcc ! configure:1327: found /usr/bin/gcc ! configure:1337: result: gcc ! configure:1581: checking for C compiler version ! configure:1584: gcc --version </dev/null >&5 ! gcc (GCC) 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk) ! Copyright (C) 2002 Free Software Foundation, Inc. ! This is free software; see the source for copying conditions. There is NO ! warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ! ! configure:1587: $? = 0 ! configure:1589: gcc -v </dev/null >&5 ! Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.2/specs ! Configured with: ../configure --prefix=/usr --libdir=/usr/lib --with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --enable-long-long --enable-__cxa_atexit --enable-languages=c,c++,ada,f77,objc,java --host=i586-mandrake-linux-gnu --with-system-zlib ! Thread model: posix ! gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk) ! configure:1592: $? = 0 ! configure:1594: gcc -V </dev/null >&5 ! gcc: argument to `-V' is missing ! configure:1597: $? = 1 ! configure:1620: checking for C compiler default output file name ! configure:1623: gcc conftest.c >&5 ! configure:1626: $? = 0 ! configure:1672: result: a.out ! configure:1677: checking whether the C compiler works ! configure:1683: ./a.out ! configure:1686: $? = 0 ! configure:1703: result: yes ! configure:1710: checking whether we are cross compiling ! configure:1712: result: no ! configure:1715: checking for suffix of executables ! configure:1717: gcc -o conftest conftest.c >&5 ! configure:1720: $? = 0 ! configure:1745: result: ! configure:1751: checking for suffix of object files ! configure:1772: gcc -c conftest.c >&5 ! configure:1775: $? = 0 ! configure:1797: result: o ! configure:1801: checking whether we are using the GNU C compiler ! configure:1825: gcc -c conftest.c >&5 ! configure:1831: $? = 0 ! configure:1835: test -z ! || test ! -s conftest.err ! configure:1838: $? = 0 ! configure:1841: test -s conftest.o ! configure:1844: $? = 0 ! configure:1857: result: yes ! configure:1863: checking whether gcc accepts -g ! configure:1884: gcc -c -g conftest.c >&5 ! configure:1890: $? = 0 ! configure:1894: test -z ! || test ! -s conftest.err ! configure:1897: $? = 0 ! configure:1900: test -s conftest.o ! configure:1903: $? = 0 ! configure:1914: result: yes ! configure:1931: checking for gcc option to accept ANSI C ! configure:2001: gcc -c -g -O2 conftest.c >&5 ! configure:2007: $? = 0 ! configure:2011: test -z ! || test ! -s conftest.err ! configure:2014: $? = 0 ! configure:2017: test -s conftest.o ! configure:2020: $? = 0 ! configure:2038: result: none needed ! configure:2056: gcc -c -g -O2 conftest.c >&5 ! conftest.c:2: parse error before "me" ! configure:2062: $? = 1 ! configure: failed program was: ! | #ifndef __cplusplus ! | choke me ! | #endif ! configure:2197: checking for strerror in -lcposix ! configure:2227: gcc -o conftest -g -O2 conftest.c -lcposix >&5 ! /usr/bin/ld: cannot find -lcposix ! collect2: ld returned 1 exit status ! configure:2233: $? = 1 ! configure: failed program was: ! | /* confdefs.h. */ ! | ! | #define PACKAGE_NAME "" ! | #define PACKAGE_TARNAME "" ! | #define PACKAGE_VERSION "" ! | #define PACKAGE_STRING "" ! | #define PACKAGE_BUGREPORT "" ! | /* end confdefs.h. */ ! | ! | /* Override any gcc2 internal prototype to avoid an error. */ ! | #ifdef __cplusplus ! | extern "C" ! | #endif ! | /* We use char because int might match the return type of a gcc2 ! | builtin and then its argument prototype would still apply. */ ! | char strerror (); ! | int ! | main () ! | { ! | strerror (); ! | ; ! | return 0; ! | } ! configure:2259: result: no ! configure:2313: checking for gcc ! configure:2339: result: gcc ! configure:2583: checking for C compiler version ! configure:2586: gcc --version </dev/null >&5 ! gcc (GCC) 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk) ! Copyright (C) 2002 Free Software Foundation, Inc. ! This is free software; see the source for copying conditions. There is NO ! warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ! ! configure:2589: $? = 0 ! configure:2591: gcc -v </dev/null >&5 ! Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.2/specs ! Configured with: ../configure --prefix=/usr --libdir=/usr/lib --with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --enable-long-long --enable-__cxa_atexit --enable-languages=c,c++,ada,f77,objc,java --host=i586-mandrake-linux-gnu --with-system-zlib ! Thread model: posix ! gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk) ! configure:2594: $? = 0 ! configure:2596: gcc -V </dev/null >&5 ! gcc: argument to `-V' is missing ! configure:2599: $? = 1 ! configure:2602: checking whether we are using the GNU C compiler ! configure:2658: result: yes ! configure:2664: checking whether gcc accepts -g ! configure:2715: result: yes ! configure:2732: checking for gcc option to accept ANSI C ! configure:2839: result: none needed ! configure:2857: gcc -c -g -O2 conftest.c >&5 ! conftest.c:2: parse error before "me" ! configure:2863: $? = 1 ! configure: failed program was: ! | #ifndef __cplusplus ! | choke me ! | #endif ! configure:2999: checking for gcc option to accept ANSI C ! configure:3061: gcc -c -g -O2 conftest.c >&5 ! configure:3067: $? = 0 ! configure:3071: test -z ! || test ! -s conftest.err ! configure:3074: $? = 0 ! configure:3077: test -s conftest.o ! configure:3080: $? = 0 ! configure:3095: result: none needed ! configure:3111: checking how to run the C preprocessor ! configure:3146: gcc -E conftest.c ! configure:3152: $? = 0 ! configure:3184: gcc -E conftest.c ! conftest.c:9:28: ac_nonexistent.h: No such file or directory ! configure:3190: $? = 1 ! configure: failed program was: ! | /* confdefs.h. */ ! | ! | #define PACKAGE_NAME "" ! | #define PACKAGE_TARNAME "" ! | #define PACKAGE_VERSION "" ! | #define PACKAGE_STRING "" ! | #define PACKAGE_BUGREPORT "" ! | /* end confdefs.h. */ ! | #include <ac_nonexistent.h> ! configure:3229: result: gcc -E ! configure:3253: gcc -E conftest.c ! configure:3259: $? = 0 ! configure:3291: gcc -E conftest.c ! conftest.c:9:28: ac_nonexistent.h: No such file or directory ! configure:3297: $? = 1 ! configure: failed program was: ! | /* confdefs.h. */ ! | ! | #define PACKAGE_NAME "" ! | #define PACKAGE_TARNAME "" ! | #define PACKAGE_VERSION "" ! | #define PACKAGE_STRING "" ! | #define PACKAGE_BUGREPORT "" ! | /* end confdefs.h. */ ! | #include <ac_nonexistent.h> ! configure:3341: checking for egrep ! configure:3351: result: grep -E ! configure:3356: checking for ANSI C header files ! configure:3381: gcc -c -g -O2 conftest.c >&5 ! configure:3387: $? = 0 ! configure:3391: test -z ! || test ! -s conftest.err ! configure:3394: $? = 0 ! configure:3397: test -s conftest.o ! configure:3400: $? = 0 ! configure:3486: gcc -o conftest -g -O2 conftest.c >&5 ! configure:3489: $? = 0 ! configure:3491: ./conftest ! configure:3494: $? = 0 ! configure:3509: result: yes ! configure:3557: checking for a BSD-compatible install ! configure:3612: result: /usr/bin/install -c ! configure:3623: checking whether make sets $(MAKE) ! configure:3643: result: yes ! configure:3652: checking whether build environment is sane ! configure:3695: result: yes ! configure:3698: checking whether to enable maintainer-specific portions of Makefiles ! configure:3707: result: no ! configure:3721: checking if malloc debugging is wanted ! configure:3742: result: no ! configure:3780: checking for imlib2-config ! configure:3798: found /usr/local/bin/imlib2-config ! configure:3811: result: /usr/local/bin/imlib2-config ! configure:3818: checking for imlib2 - version >= 1.0.0 ! configure:3876: result: yes ! configure:3909: checking for XWindowByProperty in -lMagick ! configure:3939: gcc -o conftest -g -O2 conftest.c -lMagick -I/usr/X11R6/include -L/usr/X11R6/lib >&5 ! configure:3945: $? = 0 ! configure:3949: test -z ! || test ! -s conftest.err ! configure:3952: $? = 0 ! configure:3955: test -s conftest ! configure:3958: $? = 0 ! configure:3971: result: yes ! configure:3987: checking for BZ2_bzBuffToBuffCompress in -lbz2 ! configure:4017: gcc -o conftest -g -O2 conftest.c -lbz2 -lMagick >&5 ! configure:4023: $? = 0 ! configure:4027: test -z ! || test ! -s conftest.err ! configure:4030: $? = 0 ! configure:4033: test -s conftest ! configure:4036: $? = 0 ! configure:4049: result: yes ! configure:4065: checking for deflate in -lz ! configure:4095: gcc -o conftest -g -O2 conftest.c -lz -lbz2 -lMagick >&5 ! configure:4101: $? = 0 ! configure:4105: test -z ! || test ! -s conftest.err ! configure:4108: $? = 0 ! configure:4111: test -s conftest ! configure:4114: $? = 0 ! configure:4127: result: yes ! configure:4143: checking for dlopen in -ldl ! configure:4173: gcc -o conftest -g -O2 conftest.c -ldl -lz -lbz2 -lMagick >&5 ! configure:4179: $? = 0 ! configure:4183: test -z ! || test ! -s conftest.err ! configure:4186: $? = 0 ! configure:4189: test -s conftest ! configure:4192: $? = 0 ! configure:4205: result: yes ! configure:4221: checking for InitMP3 in -lmp3lame ! configure:4251: gcc -o conftest -g -O2 conftest.c -lmp3lame -lm -ldl -lz -lbz2 -lMagick >&5 ! configure:4257: $? = 0 ! configure:4261: test -z ! || test ! -s conftest.err ! configure:4264: $? = 0 ! configure:4267: test -s conftest ! configure:4270: $? = 0 ! configure:4283: result: yes ! configure:4299: checking for ogg_stream_init in -logg ! configure:4329: gcc -o conftest -g -O2 conftest.c -logg -lm -lmp3lame -ldl -lz -lbz2 -lMagick >&5 ! configure:4335: $? = 0 ! configure:4339: test -z ! || test ! -s conftest.err ! configure:4342: $? = 0 ! configure:4345: test -s conftest ! configure:4348: $? = 0 ! configure:4361: result: yes ! configure:4377: checking for vorbis_analysis_init in -lvorbis ! configure:4407: gcc -o conftest -g -O2 conftest.c -lvorbis -lm -logg -lmp3lame -ldl -lz -lbz2 -lMagick >&5 ! configure:4413: $? = 0 ! configure:4417: test -z ! || test ! -s conftest.err ! configure:4420: $? = 0 ! configure:4423: test -s conftest ! configure:4426: $? = 0 ! configure:4439: result: yes ! configure:4455: checking for vorbis_encode_setup_init in -lvorbisenc ! configure:4485: gcc -o conftest -g -O2 conftest.c -lvorbisenc -lm -lvorbis -logg -lmp3lame -ldl -lz -lbz2 -lMagick >&5 ! configure:4491: $? = 0 ! configure:4495: test -z ! || test ! -s conftest.err ! configure:4498: $? = 0 ! configure:4501: test -s conftest ! configure:4504: $? = 0 ! configure:4517: result: yes ! configure:4701: creating ./config.status ! ! ## ---------------------- ## ! ## Running config.status. ## ! ## ---------------------- ## ! ! This file was extended by config.status, which was ! generated by GNU Autoconf 2.58. Invocation command line was ! ! CONFIG_FILES = ! CONFIG_HEADERS = ! CONFIG_LINKS = ! CONFIG_COMMANDS = ! $ ./config.status ! ! on dhcp-132-100 ! ! config.status:655: creating Makefile ! config.status:655: creating system/Makefile ! config.status:655: creating modules/Makefile ! ! ## ---------------- ## ! ## Cache variables. ## ! ## ---------------- ## ! ! ac_cv_c_compiler_gnu=yes ! ac_cv_env_CC_set= ! ac_cv_env_CC_value= ! ac_cv_env_CFLAGS_set= ! ac_cv_env_CFLAGS_value= ! ac_cv_env_CPPFLAGS_set= ! ac_cv_env_CPPFLAGS_value= ! ac_cv_env_CPP_set= ! ac_cv_env_CPP_value= ! ac_cv_env_LDFLAGS_set= ! ac_cv_env_LDFLAGS_value= ! ac_cv_env_build_alias_set= ! ac_cv_env_build_alias_value= ! ac_cv_env_host_alias_set= ! ac_cv_env_host_alias_value= ! ac_cv_env_target_alias_set= ! ac_cv_env_target_alias_value= ! ac_cv_exeext= ! ac_cv_header_stdc=yes ! ac_cv_lib_Magick_XWindowByProperty=yes ! ac_cv_lib_bz2_BZ2_bzBuffToBuffCompress=yes ! ac_cv_lib_cposix_strerror=no ! ac_cv_lib_dl_dlopen=yes ! ac_cv_lib_mp3lame_InitMP3=yes ! ac_cv_lib_ogg_ogg_stream_init=yes ! ac_cv_lib_vorbis_vorbis_analysis_init=yes ! ac_cv_lib_vorbisenc_vorbis_encode_setup_init=yes ! ac_cv_lib_z_deflate=yes ! ac_cv_objext=o ! ac_cv_path_IMLIB2_CONFIG=/usr/local/bin/imlib2-config ! ac_cv_path_install='/usr/bin/install -c' ! ac_cv_prog_CPP='gcc -E' ! ac_cv_prog_ac_ct_CC=gcc ! ac_cv_prog_cc_g=yes ! ac_cv_prog_cc_stdc= ! ac_cv_prog_egrep='grep -E' ! ac_cv_prog_make_make_set=yes ! am_cv_prog_cc_stdc= ! ! ## ----------------- ## ! ## Output variables. ## ! ## ----------------- ## ! ! CC='gcc' ! CFLAGS='-g -O2 -Wall' ! CPP='gcc -E' ! CPPFLAGS='' ! DEFS='-DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DSTDC_HEADERS=1 -DHAVE_LIBMAGICK=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBZ=1 -DHAVE_LIBDL=1 -DHAVE_LIBMP3LAME=1 -DHAVE_LIBOGG=1 -DHAVE_LIBVORBIS=1 -DHAVE_LIBVORBISENC=1 ' ! ECHO_C='' ! ECHO_N='-n' ! ECHO_T='' ! EGREP='grep -E' ! EXEEXT='' ! FFMPEG_SOURCE_DIR='/SOURCES/ffmpeg' ! IMLIB2_CFLAGS='-I/usr/local/include -I/usr/X11R6/include' ! IMLIB2_CONFIG='/usr/local/bin/imlib2-config' ! IMLIB2_LIBS='-L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib' ! IMLIB_CFLAGS='-I/usr/local/include -I/usr/X11R6/include' ! IMLIB_LIBS='-L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib' ! INSTALL_DATA='${INSTALL} -m 644' ! INSTALL_PROGRAM='${INSTALL}' ! INSTALL_SCRIPT='${INSTALL}' ! LDFLAGS='' ! LIBOBJS='' ! LIBS='-lvorbisenc -lvorbis -logg -lmp3lame -ldl -lz -lbz2 -lMagick -lbz2 -lz -ldl -lmp3lame -logg -lvorbis -lvorbisenc' ! LTLIBOBJS='' ! MAGICK_CFLAGS='-I/usr/X11R6/include -g -O2 -Wall ' ! MAGICK_LIBS='-L/usr/X11R6/lib -lMagick -lMagick -ltiff -lfreetype -ljasper -ljpeg -lpng -lXext -lSM -lICE -lX11 -lbz2 -lxml2 -lz -lpthread -lm -L/usr/local/lib -L/usr/X11R6/lib -L/usr/X11R6/lib -L/usr/local/lib' ! MAINT='#' ! MAINTAINER_MODE_FALSE='' ! MAINTAINER_MODE_TRUE='#' ! OBJEXT='o' ! PACKAGE_BUGREPORT='' ! PACKAGE_NAME='' ! PACKAGE_STRING='' ! PACKAGE_TARNAME='' ! PACKAGE_VERSION='' ! PATH_SEPARATOR=':' ! PDP_DIR='/usr/local/pd/pdp' ! PDP_PIDIP_VERSION='0.12.12' ! PD_DIR='/usr/local/pd' ! SET_MAKE='' ! SHELL='/bin/sh' ! ac_ct_CC='gcc' ! bindir='${exec_prefix}/bin' ! build_alias='' ! datadir='${prefix}/share' ! exec_prefix='${prefix}' ! host_alias='' ! includedir='${prefix}/include' ! infodir='${prefix}/info' ! libdir='${exec_prefix}/lib' ! libexecdir='${exec_prefix}/libexec' ! localstatedir='${prefix}/var' ! mandir='${prefix}/man' ! oldincludedir='/usr/include' ! prefix='/usr/local' ! program_transform_name='s,x,x,' ! sbindir='${exec_prefix}/sbin' ! sharedstatedir='${prefix}/com' ! sysconfdir='${prefix}/etc' ! target_alias='' ! ! ## ----------- ## ! ## confdefs.h. ## ! ## ----------- ## ! ! #define HAVE_LIBBZ2 1 ! #define HAVE_LIBDL 1 ! #define HAVE_LIBMAGICK 1 ! #define HAVE_LIBMP3LAME 1 ! #define HAVE_LIBOGG 1 ! #define HAVE_LIBVORBIS 1 ! #define HAVE_LIBVORBISENC 1 ! #define HAVE_LIBZ 1 ! #define PACKAGE_BUGREPORT "" ! #define PACKAGE_NAME "" ! #define PACKAGE_STRING "" ! #define PACKAGE_TARNAME "" ! #define PACKAGE_VERSION "" ! #define STDC_HEADERS 1 ! ! configure: exit 0

Index: config.status =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/config.status,v retrieving revision 1.3 retrieving revision 1.4 diff -C2 -d -r1.3 -r1.4 *** config.status 29 Oct 2003 02:29:45 -0000 1.3 --- config.status 8 Dec 2003 22:45:54 -0000 1.4 *************** *** 1,132 **** #! /bin/sh ! # Generated automatically by configure. # Run this file to recreate the current configuration. - # This directory was configured as follows, - # on host dhcp-94-145: - # - # ./configure - # # Compiler output produced by configure, useful for debugging ! # configure, is in ./config.log if it exists.

! ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]" ! for ac_option do ! case "$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! echo "running ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion" ! exec ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion ;; ! -version | --version | --versio | --versi | --vers | --ver | --ve | --v) ! echo "./config.status generated by autoconf version 2.13" ! exit 0 ;; ! -help | --help | --hel | --he | --h) echo "$ac_cs_usage"; exit 0 ;; ! *) echo "$ac_cs_usage"; exit 1 ;; esac done

! ac_given_srcdir=. ! ac_given_INSTALL="/usr/bin/install -c"

! trap 'rm -fr conftest*; exit 1' 1 2 15

! # Protect against being on the right side of a sed subst in config.status. ! sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\&%]/\&/g; ! s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF ! /^[ ]*VPATH[ ]*=[^:]*$/d

CEOF

! # Split the substitutions into bite-sized pieces for seds with ! # small command number limits, like on Digital OSF/1 and HP-UX. ! ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ! ac_file=1 # Number of current file. ! ac_beg=1 # First line for current file. ! ac_end=$ac_max_sed_cmds # Line after last line for current file. ! ac_more_lines=: ! ac_sed_cmds="" ! while $ac_more_lines; do ! if test $ac_beg -gt 1; then ! sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file ! else ! sed "${ac_end}q" conftest.subs > conftest.s$ac_file ! fi ! if test ! -s conftest.s$ac_file; then ! ac_more_lines=false ! rm -f conftest.s$ac_file ! else ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds="sed -f conftest.s$ac_file" else ! ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ! ac_file=`expr $ac_file + 1` ! ac_beg=$ac_end ! ac_end=`expr $ac_end + $ac_max_sed_cmds` fi ! done ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds=cat ! fi

! CONFIG_FILES=${CONFIG_FILES-""} ! for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ! case "$ac_file" in ! *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ! ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; ! *) ac_file_in="${ac_file}.in" ;; esac

! # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. ! ! # Remove last slash and all that follows it. Not all systems have dirname. ! ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` ! if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then ! # The file is in a subdirectory. ! test ! -d "$ac_dir" && mkdir "$ac_dir" ! ac_dir_suffix="/`echo $ac_dir|sed 's%^./%%'`" ! # A "../" for each directory in $ac_dir_suffix. ! ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ! ac_dir_suffix= ac_dots= ! fi

! case "$ac_given_srcdir" in ! .) srcdir=. ! if test -z "$ac_dots"; then top_srcdir=. ! else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; ! /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. ! srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" ! top_srcdir="$ac_dots$ac_given_srcdir" ;; ! esac

- case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac

! echo creating "$ac_file" ! rm -f "$ac_file" ! configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." ! case "$ac_file" in ! *Makefile*) ac_comsub="1i\ ! # $configure_input" ;; ! *) ac_comsub= ;; esac

! ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` ! sed -e "$ac_comsub ! s%@configure_input@%$configure_input%g ! s%@srcdir@%$srcdir%g ! s%@top_srcdir@%$top_srcdir%g ! s%@INSTALL@%$INSTALL%g ! " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file ! fi; done ! rm -f conftest.s*

! exit 0 --- 1,729 ---- #! /bin/sh ! # Generated by configure. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging ! # configure, is in config.log if it exists.

! debug=false ! ac_cs_recheck=false ! ac_cs_silent=false ! SHELL=${CONFIG_SHELL-/bin/sh} ! ## --------------------- ## ! ## M4sh Initialization. ## ! ## --------------------- ## ! ! # Be Bourne compatible ! if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ! emulate sh ! NULLCMD=: ! # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ! # is contrary to our usage. Disable this feature. ! alias -g '${1+"$@"}'='"$@"' ! elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then ! set -o posix ! fi ! DUALCASE=1; export DUALCASE # for MKS sh ! ! # Support unset when possible. ! if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ! as_unset=unset ! else ! as_unset=false ! fi ! ! ! # Work around bugs in pre-3.0 UWIN ksh. ! $as_unset ENV MAIL MAILPATH ! PS1='$ ' ! PS2='> ' ! PS4='+ ' ! ! # NLS nuisances. ! for as_var in \ ! LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ! LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ! LC_TELEPHONE LC_TIME do ! if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ! eval $as_var=C; export $as_var ! else ! $as_unset $as_var ! fi ! done ! ! # Required to use basename. ! if expr a : '(a)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ! as_basename=basename ! else ! as_basename=false ! fi ! ! ! # Name of the executable. ! as_me=`$as_basename "$0" || ! $as_expr X/"$0" : '.*/([^/][^/]*)/*$' | \ ! X"$0" : 'X(//)$' | \ ! X"$0" : 'X(/)$' | \ ! . : '(.)' 2>/dev/null || ! echo X/"$0" | ! sed '/^.*/([^/][^/]*)/*$/{ s//\1/; q; } ! /^X/(//)$/{ s//\1/; q; } ! /^X/(/).*/{ s//\1/; q; } ! s/.*/./; q'` ! ! ! # PATH needs CR, and LINENO needs CR and PATH. ! # Avoid depending upon Character Ranges. ! as_cr_letters='abcdefghijklmnopqrstuvwxyz' ! as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ! as_cr_Letters=$as_cr_letters$as_cr_LETTERS ! as_cr_digits='0123456789' ! as_cr_alnum=$as_cr_Letters$as_cr_digits ! ! # The user is always right. ! if test "${PATH_SEPARATOR+set}" != set; then ! echo "#! /bin/sh" >conf$$.sh ! echo "exit 0" >>conf$$.sh ! chmod +x conf$$.sh ! if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ! PATH_SEPARATOR=';' ! else ! PATH_SEPARATOR=: ! fi ! rm -f conf$$.sh ! fi ! ! ! as_lineno_1=$LINENO ! as_lineno_2=$LINENO ! as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ! test "x$as_lineno_1" != "x$as_lineno_2" && ! test "x$as_lineno_3" = "x$as_lineno_2" || { ! # Find who we are. Look in the path if we contain no path at all ! # relative or not. ! case $0 in ! *[\/]* ) as_myself=$0 ;; ! *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in $PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ! done ! ! ;; ! esac ! # We did not find ourselves, most probably we were run as `sh COMMAND' ! # in which case we are not to be found in the path. ! if test "x$as_myself" = x; then ! as_myself=$0 ! fi ! if test ! -f "$as_myself"; then ! { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 ! echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} ! { (exit 1); exit 1; }; } ! fi ! case $CONFIG_SHELL in ! '') ! as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ! for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH ! do ! IFS=$as_save_IFS ! test -z "$as_dir" && as_dir=. ! for as_base in sh bash ksh sh5; do ! case $as_dir in ! /*) ! if ("$as_dir/$as_base" -c ' ! as_lineno_1=$LINENO ! as_lineno_2=$LINENO ! as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` ! test "x$as_lineno_1" != "x$as_lineno_2" && ! test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then ! $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } ! $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } ! CONFIG_SHELL=$as_dir/$as_base ! export CONFIG_SHELL ! exec "$CONFIG_SHELL" "$0" ${1+"$@"} ! fi;; ! esac ! done ! done ! ;; ! esac ! ! # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ! # uniformly replaced by the line number. The first 'sed' inserts a ! # line-number line before each line; the second 'sed' does the real ! # work. The second script uses 'N' to pair each line-number line ! # with the numbered line, and appends trailing '-' during ! # substitution so that $LINENO is not a special case at line end. ! # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ! # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) ! sed '=' <$as_myself | ! sed ' ! N ! s,$,-, ! : loop ! s,^(['$as_cr_digits']*)(.*)[$]LINENO([^'$as_cr_alnum'_]),\1\2\1\3, ! t loop ! s,-$,, ! s,^['$as_cr_digits']*\n,, ! ' >$as_me.lineno && ! chmod +x $as_me.lineno || ! { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 ! echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ! { (exit 1); exit 1; }; } ! ! # Don't try to exec as it changes $[0], causing all sort of problems ! # (the dirname of $[0] is not the place where we might find the ! # original and so on. Autoconf is especially sensible to this). ! . ./$as_me.lineno ! # Exit status is that of the last command. ! exit ! } ! ! ! case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in ! *c*,-n*) ECHO_N= ECHO_C=' ! ' ECHO_T=' ' ;; ! *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; ! *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ! esac ! ! if expr a : '(a)' >/dev/null 2>&1; then ! as_expr=expr ! else ! as_expr=false ! fi ! ! rm -f conf$$ conf$$.exe conf$$.file ! echo >conf$$.file ! if ln -s conf$$.file conf$$ 2>/dev/null; then ! # We could just check for DJGPP; but this test a) works b) is more generic ! # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). ! if test -f conf$$.exe; then ! # Don't use ln at all; we don't have any links ! as_ln_s='cp -p' ! else ! as_ln_s='ln -s' ! fi ! elif ln conf$$.file conf$$ 2>/dev/null; then ! as_ln_s=ln ! else ! as_ln_s='cp -p' ! fi ! rm -f conf$$ conf$$.exe conf$$.file ! ! if mkdir -p . 2>/dev/null; then ! as_mkdir_p=: ! else ! test -d ./-p && rmdir ./-p ! as_mkdir_p=false ! fi ! ! as_executable_p="test -f" ! ! # Sed expression to map a string onto a valid CPP name. ! as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ! ! # Sed expression to map a string onto a valid variable name. ! as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ! ! ! # IFS ! # We need space, tab and new line, in precisely that order. ! as_nl=' ! ' ! IFS=" $as_nl" ! ! # CDPATH. ! $as_unset CDPATH ! ! exec 6>&1 ! ! # Open the log real soon, to keep $[0] and so on meaningful, and to ! # report actual input values of CONFIG_FILES etc. instead of their ! # values after options handling. Logging --version etc. is OK. ! exec 5>>config.log ! { ! echo ! sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ! ## Running $as_me. ## ! _ASBOX ! } >&5 ! cat >&5 <<_CSEOF ! ! This file was extended by $as_me, which was ! generated by GNU Autoconf 2.58. Invocation command line was ! ! CONFIG_FILES = $CONFIG_FILES ! CONFIG_HEADERS = $CONFIG_HEADERS ! CONFIG_LINKS = $CONFIG_LINKS ! CONFIG_COMMANDS = $CONFIG_COMMANDS ! $ $0 $@ ! ! _CSEOF ! echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 ! echo >&5 ! config_files=" Makefile system/Makefile modules/Makefile" ! ! ac_cs_usage="\ ! `$as_me' instantiates files from templates according to the ! current configuration. ! ! Usage: $0 [OPTIONS] [FILE]... ! ! -h, --help print this help, then exit ! -V, --version print version number, then exit ! -q, --quiet do not print progress messages ! -d, --debug don't remove temporary files ! --recheck update $as_me by reconfiguring in the same conditions ! --file=FILE[:TEMPLATE] ! instantiate the configuration file FILE ! ! Configuration files: ! $config_files ! ! Report bugs to bug-autoconf@gnu.org." ! ac_cs_version="\ ! config.status ! configured by ./configure, generated by GNU Autoconf 2.58, ! with options "" ! ! Copyright (C) 2003 Free Software Foundation, Inc. ! This config.status script is free software; the Free Software Foundation ! gives unlimited permission to copy, distribute and modify it." ! srcdir=. ! INSTALL="/usr/bin/install -c" ! # If no file are specified by the user, then we need to provide default ! # value. By we need to know if files were specified by the user. ! ac_need_defaults=: ! while test $# != 0 ! do ! case $1 in ! --*=*) ! ac_option=`expr "x$1" : 'x([^=]*)='` ! ac_optarg=`expr "x$1" : 'x[^=]*=(.*)'` ! ac_shift=: ! ;; ! -*) ! ac_option=$1 ! ac_optarg=$2 ! ac_shift=shift ! ;; ! *) # This is not an option, so the user has probably given explicit ! # arguments. ! ac_option=$1 ! ac_need_defaults=false;; ! esac ! ! case $ac_option in ! # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ! ac_cs_recheck=: ;; ! --version | --vers* | -V ) ! echo "$ac_cs_version"; exit 0 ;; ! --he | --h) ! # Conflict between --help and --header ! { { echo "$as_me:$LINENO: error: ambiguous option: $1 ! Try `$0 --help' for more information." >&5 ! echo "$as_me: error: ambiguous option: $1 ! Try `$0 --help' for more information." >&2;} ! { (exit 1); exit 1; }; };; ! --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; ! --debug | --d* | -d ) ! debug=: ;; ! --file | --fil | --fi | --f ) ! $ac_shift ! CONFIG_FILES="$CONFIG_FILES $ac_optarg" ! ac_need_defaults=false;; ! --header | --heade | --head | --hea ) ! $ac_shift ! CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ! ac_need_defaults=false;; ! -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ! | -silent | --silent | --silen | --sile | --sil | --si | --s) ! ac_cs_silent=: ;; ! ! # This is an error. ! -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 ! Try `$0 --help' for more information." >&5 ! echo "$as_me: error: unrecognized option: $1 ! Try `$0 --help' for more information." >&2;} ! { (exit 1); exit 1; }; } ;; ! ! *) ac_config_targets="$ac_config_targets $1" ;; ! esac + shift done

! ac_configure_extra_args=

! if $ac_cs_silent; then ! exec 6>/dev/null ! ac_configure_extra_args="$ac_configure_extra_args --silent" ! fi

! if $ac_cs_recheck; then ! echo "running /bin/sh ./configure " $ac_configure_extra_args " --no-create --no-recursion" >&6 ! exec /bin/sh ./configure $ac_configure_extra_args --no-create --no-recursion ! fi ! ! for ac_config_target in $ac_config_targets ! do ! case "$ac_config_target" in ! # Handling of arguments. ! "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; ! "system/Makefile" ) CONFIG_FILES="$CONFIG_FILES system/Makefile" ;; ! "modules/Makefile" ) CONFIG_FILES="$CONFIG_FILES modules/Makefile" ;; ! *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ! echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ! { (exit 1); exit 1; }; };; ! esac ! done ! ! # If the user did not use the arguments to specify the items to instantiate, ! # then the envvar interface is used. Set only those that are not. ! # We use the long form for the default assignment because of an extremely ! # bizarre bug on SunOS 4.1.3. ! if $ac_need_defaults; then ! test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ! fi ! ! # Have a temporary directory for convenience. Make it in the build tree ! # simply because there is no reason to put it here, and in addition, ! # creating and moving files from /tmp can sometimes cause problems. ! # Create a temporary directory, and hook for its removal unless debugging. ! $debug || ! { ! trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ! trap '{ (exit 1); exit 1; }' 1 2 13 15 ! } ! ! # Create a (secure) tmp directory for tmp files. ! ! { ! tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ! test -n "$tmp" && test -d "$tmp" ! } || ! { ! tmp=./confstat$$-$RANDOM ! (umask 077 && mkdir $tmp) ! } || ! { ! echo "$me: cannot create a temporary directory in ." >&2 ! { (exit 1); exit 1; } ! }

+ # + # CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h + if test -n "$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\&,]/\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF + s,@SHELL@,/bin/sh,;t t + s,@PATH_SEPARATOR@,:,;t t + s,@PACKAGE_NAME@,,;t t + s,@PACKAGE_TARNAME@,,;t t + s,@PACKAGE_VERSION@,,;t t + s,@PACKAGE_STRING@,,;t t + s,@PACKAGE_BUGREPORT@,,;t t + s,@exec_prefix@,${prefix},;t t + s,@prefix@,/usr/local,;t t + s,@program_transform_name@,s,x,x,,;t t + s,@bindir@,${exec_prefix}/bin,;t t + s,@sbindir@,${exec_prefix}/sbin,;t t + s,@libexecdir@,${exec_prefix}/libexec,;t t + s,@datadir@,${prefix}/share,;t t + s,@sysconfdir@,${prefix}/etc,;t t + s,@sharedstatedir@,${prefix}/com,;t t + s,@localstatedir@,${prefix}/var,;t t + s,@libdir@,${exec_prefix}/lib,;t t + s,@includedir@,${prefix}/include,;t t + s,@oldincludedir@,/usr/include,;t t + s,@infodir@,${prefix}/info,;t t + s,@mandir@,${prefix}/man,;t t + s,@build_alias@,,;t t + s,@host_alias@,,;t t + s,@target_alias@,,;t t + s,@DEFS@,-DPACKAGE_NAME="" -DPACKAGE_TARNAME="" -DPACKAGE_VERSION="" -DPACKAGE_STRING="" -DPACKAGE_BUGREPORT="" -DSTDC_HEADERS=1 -DHAVE_LIBMAGICK=1 -DHAVE_LIBBZ2=1 -DHAVE_LIBZ=1 -DHAVE_LIBDL=1 -DHAVE_LIBMP3LAME=1 -DHAVE_LIBOGG=1 -DHAVE_LIBVORBIS=1 -DHAVE_LIBVORBISENC=1 ,;t t + s,@ECHO_C@,,;t t + s,@ECHO_N@,-n,;t t + s,@ECHO_T@,,;t t + s,@LIBS@,-lvorbisenc -lvorbis -logg -lmp3lame -ldl -lz -lbz2 -lMagick -lbz2 -lz -ldl -lmp3lame -logg -lvorbis -lvorbisenc,;t t + s,@CC@,gcc,;t t + s,@CFLAGS@,-g -O2 -Wall,;t t + s,@LDFLAGS@,,;t t + s,@CPPFLAGS@,,;t t + s,@ac_ct_CC@,gcc,;t t + s,@EXEEXT@,,;t t + s,@OBJEXT@,o,;t t + s,@CPP@,gcc -E,;t t + s,@EGREP@,grep -E,;t t + s,@INSTALL_PROGRAM@,${INSTALL},;t t + s,@INSTALL_SCRIPT@,${INSTALL},;t t + s,@INSTALL_DATA@,${INSTALL} -m 644,;t t + s,@SET_MAKE@,,;t t + s,@MAINTAINER_MODE_TRUE@,#,;t t + s,@MAINTAINER_MODE_FALSE@,,;t t + s,@MAINT@,#,;t t + s,@IMLIB2_CONFIG@,/usr/local/bin/imlib2-config,;t t + s,@IMLIB_LIBS@,-L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib,;t t + s,@IMLIB_CFLAGS@,-I/usr/local/include -I/usr/X11R6/include,;t t + s,@IMLIB2_CFLAGS@,-I/usr/local/include -I/usr/X11R6/include,;t t + s,@IMLIB2_LIBS@,-L/usr/local/lib -lImlib2 -lttf -lm -ldl -lXext -lXext -lX11 -L/usr/X11R6/lib,;t t + s,@PDP_PIDIP_VERSION@,0.12.12,;t t + s,@MAGICK_LIBS@,-L/usr/X11R6/lib -lMagick -lMagick -ltiff -lfreetype -ljasper -ljpeg -lpng -lXext -lSM -lICE -lX11 -lbz2 -lxml2 -lz -lpthread -lm -L/usr/local/lib -L/usr/X11R6/lib -L/usr/X11R6/lib -L/usr/local/lib,;t t + s,@MAGICK_CFLAGS@,-I/usr/X11R6/include -g -O2 -Wall ,;t t + s,@PD_DIR@,/usr/local/pd,;t t + s,@PDP_DIR@,/usr/local/pd/pdp,;t t + s,@FFMPEG_SOURCE_DIR@,/SOURCES/ffmpeg,;t t + s,@LIBOBJS@,,;t t + s,@LTLIBOBJS@,,;t t CEOF

! # Split the substitutions into bite-sized pieces for seds with ! # small command number limits, like on Digital OSF/1 and HP-UX. ! ac_max_sed_lines=48 ! ac_sed_frag=1 # Number of current file. ! ac_beg=1 # First line for current file. ! ac_end=$ac_max_sed_lines # Line after last line for current file. ! ac_more_lines=: ! ac_sed_cmds= ! while $ac_more_lines; do ! if test $ac_beg -gt 1; then ! sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else ! sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi ! if test ! -s $tmp/subs.frag; then ! ac_more_lines=false ! else ! # The purpose of the label and of the branching condition is to ! # speed up the sed processing (if there are no `@' at all, there ! # is no need to browse any of the substitutions). ! # These are the two extra sed commands mentioned above. ! (echo ':t ! /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" ! else ! ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" ! fi ! ac_sed_frag=`expr $ac_sed_frag + 1` ! ac_beg=$ac_end ! ac_end=`expr $ac_end + $ac_max_sed_lines` ! fi ! done ! if test -z "$ac_sed_cmds"; then ! ac_sed_cmds=cat fi ! fi # test -n "$CONFIG_FILES"

! for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ! case $ac_file in ! - | *:- | *:-:* ) # input from stdin ! cat >$tmp/stdin ! ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ! ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ! *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ! ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; ! * ) ac_file_in=$ac_file.in ;; esac

! # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ! ac_dir=`(dirname "$ac_file") 2>/dev/null || ! $as_expr X"$ac_file" : 'X(.*[^/])//*[^/][^/]*/*$' | \ ! X"$ac_file" : 'X(//)[^/]' | \ ! X"$ac_file" : 'X(//)$' | \ ! X"$ac_file" : 'X(/)' | \ ! . : '(.)' 2>/dev/null || ! echo X"$ac_file" | ! sed '/^X(.*[^/])//*[^/][^/]*/*$/{ s//\1/; q; } ! /^X(//)[^/].*/{ s//\1/; q; } ! /^X(//)$/{ s//\1/; q; } ! /^X(/).*/{ s//\1/; q; } ! s/.*/./; q'` ! { if $as_mkdir_p; then ! mkdir -p "$ac_dir" else ! as_dir="$ac_dir" ! as_dirs= ! while test ! -d "$as_dir"; do ! as_dirs="$as_dir $as_dirs" ! as_dir=`(dirname "$as_dir") 2>/dev/null || ! $as_expr X"$as_dir" : 'X(.*[^/])//*[^/][^/]*/*$' | \ ! X"$as_dir" : 'X(//)[^/]' | \ ! X"$as_dir" : 'X(//)$' | \ ! X"$as_dir" : 'X(/)' | \ ! . : '(.)' 2>/dev/null || ! echo X"$as_dir" | ! sed '/^X(.*[^/])//*[^/][^/]*/*$/{ s//\1/; q; } ! /^X(//)[^/].*/{ s//\1/; q; } ! /^X(//)$/{ s//\1/; q; } ! /^X(/).*/{ s//\1/; q; } ! s/.*/./; q'` ! done ! test ! -n "$as_dirs" || mkdir $as_dirs ! fi || { { echo "$as_me:$LINENO: error: cannot create directory "$ac_dir"" >&5 ! echo "$as_me: error: cannot create directory "$ac_dir"" >&2;} ! { (exit 1); exit 1; }; }; }

! ac_builddir=. ! ! if test "$ac_dir" != .; then ! ac_dir_suffix=/`echo "$ac_dir" | sed 's,^.[\/],,'` ! # A "../" for each directory in $ac_dir_suffix. ! ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\/]*,../,g'` ! else ! ac_dir_suffix= ac_top_builddir= ! fi ! ! case $srcdir in ! .) # No --srcdir option. We are building in place. ! ac_srcdir=. ! if test -z "$ac_top_builddir"; then ! ac_top_srcdir=. ! else ! ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` ! fi ;; ! [\/]* | ?:[\/]* ) # Absolute path. ! ac_srcdir=$srcdir$ac_dir_suffix; ! ac_top_srcdir=$srcdir ;; *) # Relative path. ! ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ! ac_top_srcdir=$ac_top_builddir$srcdir ;; ! esac ! case "$ac_dir" in ! .) ac_abs_builddir=$ac_builddir;; ! *) ! case $ac_builddir in ! .) ac_abs_builddir="$ac_dir";; ! [\/]* | ?:[\/]* ) ac_abs_builddir=$ac_builddir;; ! *) ac_abs_builddir="$ac_dir"/$ac_builddir;; ! esac;; ! esac ! case "$ac_dir" in ! .) ac_abs_top_builddir=${ac_top_builddir}.;; ! *) ! case ${ac_top_builddir}. in ! .) ac_abs_top_builddir="$ac_dir";; ! [\/]* | ?:[\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; ! *) ac_abs_top_builddir="$ac_dir"/${ac_top_builddir}.;; ! esac;; ! esac ! case "$ac_dir" in ! .) ac_abs_srcdir=$ac_srcdir;; ! *) ! case $ac_srcdir in ! .) ac_abs_srcdir="$ac_dir";; ! [\/]* | ?:[\/]* ) ac_abs_srcdir=$ac_srcdir;; ! *) ac_abs_srcdir="$ac_dir"/$ac_srcdir;; ! esac;; ! esac ! case "$ac_dir" in ! .) ac_abs_top_srcdir=$ac_top_srcdir;; ! *) ! case $ac_top_srcdir in ! .) ac_abs_top_srcdir="$ac_dir";; ! [\/]* | ?:[\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; ! *) ac_abs_top_srcdir="$ac_dir"/$ac_top_srcdir;; ! esac;; ! esac

! case $INSTALL in ! [\/$]* | ?:[\/]* ) ac_INSTALL=$INSTALL ;; ! *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac

! if test x"$ac_file" != x-; then ! { echo "$as_me:$LINENO: creating $ac_file" >&5 ! echo "$as_me: creating $ac_file" >&6;} ! rm -f "$ac_file" ! fi ! # Let's still pretend it is `configure' which instantiates (i.e., don't ! # use $as_me), people would be surprised to read: ! # /* config.h. Generated by config.status. */ ! if test x"$ac_file" = x-; then ! configure_input= ! else ! configure_input="$ac_file. " ! fi ! configure_input=$configure_input"Generated from `echo $ac_file_in | ! sed 's,.*/,,'` by configure."

+ # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 + echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + sed "/^[ ]*VPATH[ ]*=/{ + s/:*$(srcdir):*/:/; + s/:*${srcdir}:*/:/; + s/:*@srcdir@:*/:/; + s/^([^=]*=[ ]*):*/\1/; + s/:*$//; + s/^[^=]*=[ ]*$//; + }

+ :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b + s,@configure_input@,$configure_input,;t t + s,@srcdir@,$ac_srcdir,;t t + s,@abs_srcdir@,$ac_abs_srcdir,;t t + s,@top_srcdir@,$ac_top_srcdir,;t t + s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t + s,@builddir@,$ac_builddir,;t t + s,@abs_builddir@,$ac_abs_builddir,;t t + s,@top_builddir@,$ac_top_builddir,;t t + s,@abs_top_builddir@,$ac_abs_top_builddir,;t t + s,@INSTALL@,$ac_INSTALL,;t t + " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi

! done ! ! { (exit 0); exit 0; }

Index: configure =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/configure,v retrieving revision 1.4 retrieving revision 1.5 diff -C2 -d -r1.4 -r1.5 *** configure 23 Oct 2003 17:16:13 -0000 1.4 --- configure 8 Dec 2003 22:45:54 -0000 1.5 *************** *** 1,39 **** #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. ! # Generated automatically using autoconf version 2.13 ! # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it.

! # Defaults: [...7581 lines suppressed...] ! # config.status does its own redirection, appending to config.log. ! # Unfortunately, on DOS this fails, as config.log is still kept open ! # by configure, so config.status won't be able to write to it; its ! # output is simply discarded. So we exec the FD to /dev/null, ! # effectively closing config.log, so it can be properly (re)opened and ! # appended to by config.status. When coming back to configure, we ! # need to make the FD available again. ! if test "$no_create" != yes; then ! ac_cs_success=: ! ac_config_status_args= ! test "$silent" = yes && ! ac_config_status_args="$ac_config_status_args --quiet" ! exec 5>/dev/null ! $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false ! exec 5>>config.log ! # Use ||, not &&, to avoid exiting from the if with $? = 1, which ! # would make configure fail if this is the last instruction. ! $ac_cs_success || { (exit 1); exit 1; } ! fi

Index: configure.ac =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/configure.ac,v retrieving revision 1.6 retrieving revision 1.7 diff -C2 -d -r1.6 -r1.7 *** configure.ac 23 Oct 2003 17:16:40 -0000 1.6 --- configure.ac 8 Dec 2003 22:45:54 -0000 1.7 *************** *** 2,6 ****

AC_INIT ! PDP_PIDIP_VERSION=0.12.10 PD_DIR=/usr/local/pd PDP_DIR=/usr/local/pd/pdp --- 2,6 ----

AC_INIT ! PDP_PIDIP_VERSION=0.12.12 PD_DIR=/usr/local/pd PDP_DIR=/usr/local/pd/pdp *************** *** 28,42 **** AC_SUBST(IMLIB_LIBS) AC_SUBST(IMLIB_CFLAGS) - - AC_PATH_GENERIC(aalib, 1.0.0, [ - AC_SUBST(AALIB_LIBS) - AC_SUBST(AALIB_CFLAGS) ], - AC_MSG_ERROR(Cannot find aalib: Is aalib-config in the path?) ) - - dnl the above doesn't work for some reason :/ - AALIB_LIBS=`aalib-config --libs` - AALIB_CFLAGS=`aalib-config --cflags` - AC_SUBST(AALIB_LIBS) - AC_SUBST(AALIB_CFLAGS)

AC_CHECK_LIB(Magick, XWindowByProperty, , AC_MSG_ERROR(screen captures requires ImageMagick library!!), -I/usr/X11R6/include -L/usr/X11R6/lib ) --- 28,31 ----

Index: configure.in =================================================================== RCS file: /cvsroot/pure-data/externals/pidip/configure.in,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** configure.in 23 Oct 2003 17:08:53 -0000 1.1 --- configure.in 8 Dec 2003 22:45:54 -0000 1.2 *************** *** 2,6 ****

AC_INIT ! PDP_PIDIP_VERSION=0.12.10 PD_DIR=/usr/local/pd PDP_DIR=/usr/local/pd/pdp --- 2,6 ----

AC_INIT ! PDP_PIDIP_VERSION=0.12.12 PD_DIR=/usr/local/pd PDP_DIR=/usr/local/pd/pdp *************** *** 28,42 **** AC_SUBST(IMLIB_LIBS) AC_SUBST(IMLIB_CFLAGS) - - AC_PATH_GENERIC(aalib, 1.0.0, [ - AC_SUBST(AALIB_LIBS) - AC_SUBST(AALIB_CFLAGS) ], - AC_MSG_ERROR(Cannot find aalib: Is aalib-config in the path?) ) - - dnl the above doesn't work for some reason :/ - AALIB_LIBS=`aalib-config --libs` - AALIB_CFLAGS=`aalib-config --cflags` - AC_SUBST(AALIB_LIBS) - AC_SUBST(AALIB_CFLAGS)

AC_CHECK_LIB(Magick, XWindowByProperty, , AC_MSG_ERROR(screen captures requires ImageMagick library!!), -I/usr/X11R6/include -L/usr/X11R6/lib ) --- 28,31 ----