Revision: 10082 http://pure-data.svn.sourceforge.net/pure-data/?rev=10082&view=rev Author: eighthave Date: 2008-06-24 10:30:22 -0700 (Tue, 24 Jun 2008)

Log Message: ----------- updated readme for release based on Firmata 2.0 protocol

Modified Paths: -------------- trunk/externals/hardware/arduino/README

Modified: trunk/externals/hardware/arduino/README =================================================================== --- trunk/externals/hardware/arduino/README 2008-06-24 15:07:52 UTC (rev 10081) +++ trunk/externals/hardware/arduino/README 2008-06-24 17:30:22 UTC (rev 10082) @@ -3,13 +3,19 @@ you to control the Arduino board from Pd without having to program in Arduino's C++

-To use it, open Pd_firmware in Arduino and upload it to the board. Open up +To use it, first unzip the included Firmata-2.0 firmware and follow the README +included in there. Then you'll be able to choose firmware from Arduino +application, in File -> Open -> Library-Firmata menu. + +Once you have uploaded a firmware to your Arduino board, open up arduino-test.pd in Pd, then choose your serial port with the [open( message.

-For more on Arduino, go to http://arduino.cc +For more on Arduino, go to: http://arduino.cc

You can get more information about this firmware here: +http://www.arduino.cc/playground/Interfacing/Firmata

-http://www.arduino.cc/playground/Interfacing/Sensorbox +WARNING! This version of the arduino object for Pd will only work with 2.0 +versions of Firmata. It will NOT work with older versions of the firmware!

-Hans-Christoph Steiner hans@at.or.at +Hans-Christoph Steiner hans@eds.org

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.