externals/hardware/arduino/examples PD_all_inputs.pd, 1.1, 1.2 - Pd-cvs

11 Mar 2006


      Update of /cvsroot/pure-data/externals/hardware/arduino/examples
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv27679
Modified Files:
    PD_all_inputs.pd 
Log Message:
got the firmware for the high-speed protocol sketched out, now I need to figure out the div/mod byte format
Index: PD_all_inputs.pd
===================================================================
RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_all_inputs.pd,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** PD_all_inputs.pd	5 Mar 2006 06:48:01 -0000	1.1
--- PD_all_inputs.pd	11 Mar 2006 04:35:36 -0000	1.2
***************
*** 1,22 ****
! #N canvas 159 48 492 617 10;
! #X obj 346 18 import zexy;
! #X text 112 148 On Mac OS X , set this to the right value:;
! #X text 5 38 You might need to select another port , check the Pd
  window to see if it connected successfully:;
! #X msg 136 120 close;
! #X msg 116 165 devicename /dev/tty.usbserial-191;
! #X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10
! -3754 -1 -1 508 256;
! #N canvas 162 133 518 368 serin 0;
! #X obj 160 101 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
  -1 0;
! #X obj 241 251 s $0-number-canvas;
! #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
  -1 0;
! #X obj 101 134 + 1;
! #X obj 100 173 outlet;
! #X obj 101 39 inlet;
! #X msg 241 228 label $1;
! #X obj 241 206 makefilename %d;
  #X connect 2 0 3 0;
  #X connect 3 0 4 0;
--- 1,44 ----
! #N canvas 970 165 635 705 10;
! #X obj 480 668 import zexy;
! #X obj 21 78 nbx 4 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 91 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 161 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 231 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 301 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 371 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -241291 -1 -1 0 256;
! #X obj 21 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 0 256;
! #X obj 122 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 0 256;
! #X obj 223 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 0 256;
! #X text 160 241 On Mac OS X , set this to the right value:;
! #X msg 100 220 open $1;
! #X obj 100 287 comport 1 9600;
! #X text 15 156 You might need to select another port , check the Pd
  window to see if it connected successfully:;
! #X obj 724 492;
! #X msg 823 352;
! #X obj 838 350;
! #X msg 820 369;
! #X text 16 5 This patch works with the example Arduino firmware of
! the same name.;
! #N canvas 162 133 526 376 serin 0;
! #X obj 120 61 cnv 15 15 15 empty $0-number-canvas 1 4 7 0 14 -233017
  -1 0;
! #X obj 200 225 s $0-number-canvas;
! #X obj 60 61 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1
  -1 0;
! #X obj 60 108 + 1;
! #X obj 59 147 outlet;
! #X obj 60 13 inlet;
! #X msg 200 202 label $1;
! #X obj 200 180 makefilename %d;
  #X connect 2 0 3 0;
  #X connect 3 0 4 0;
***************
*** 25,95 ****
  #X connect 6 0 1 0;
  #X connect 7 0 6 0;
! #X coords 0 -1 1 1 76 17 1 100 100;
! #X restore 77 71 pd serin;
! #X msg 77 119 open $1;
! #X text 4 -3 This patch works with the example Arduino firmware of
! the same name.;
! #X text 9 552 CAUTION! Watch out if you connect your potentiometer
! without an extra resistor , when you turn it all the way up , the
! full voltage and current will go to the input. This could fry your
! board!;
! #X obj 79 357 +;
! #X obj 78 259 trigger float bang;
! #X obj 95 318 float;
! #X obj 95 337 * 10;
! #X obj 176 345 float;
! #X msg 196 290 0;
! #X text 250 459 ASCII for A B C D E F;
! #X obj 77 235 - 48;
! #X obj 79 460 route 65 66 67 68 69 70;
! #X obj 79 378 trigger bang float;
! #X obj 79 417 float;
! #X obj 247 386 float;
! #X obj 79 440 pack float float;
! #X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10
  -3754 -1 -1 0 256;
! #X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10
! -3754 -1 -1 10 256;
! #X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10
! -3754 -1 -1 98 256;
! #X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10
! -3754 -1 -1 158 256;
! #X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10
! -3754 -1 -1 623 256;
! #X obj 320 511 print ERRANT_VALUE;
! #X obj 247 250 float;
! #X obj 77 211 moses 58;
! #X text 84 88 (sometimes it takes up to 10 seconds to close the serial
! port , if things are running fast);
! #X text 181 121 <-- close before uploading a new firmware!;
! #X obj 77 188 comport 1 19200;
! #X connect 3 0 33 0;
! #X connect 4 0 33 0;
! #X connect 6 0 7 0;
! #X connect 7 0 33 0;
! #X connect 10 0 14 0;
! #X connect 10 0 19 0;
! #X connect 11 0 10 0;
! #X connect 11 1 12 0;
! #X connect 12 0 13 0;
! #X connect 13 0 10 1;
! #X connect 14 0 12 1;
! #X connect 15 0 12 1;
! #X connect 17 0 11 0;
! #X connect 18 0 5 0;
! #X connect 18 1 23 0;
! #X connect 18 2 24 0;
! #X connect 18 3 25 0;
! #X connect 18 4 26 0;
! #X connect 18 5 27 0;
! #X connect 18 6 28 0;
! #X connect 19 0 20 0;
! #X connect 19 1 22 1;
! #X connect 20 0 22 0;
! #X connect 21 0 20 1;
! #X connect 22 0 18 0;
! #X connect 29 0 15 0;
! #X connect 29 0 21 0;
! #X connect 30 0 17 0;
! #X connect 30 1 29 0;
! #X connect 33 0 30 0;
--- 47,158 ----
  #X connect 6 0 1 0;
  #X connect 7 0 6 0;
! #X coords 0 -1 1 1 76 17 1 60 60;
! #X restore 100 197 pd serin;
! #X text 181 198 serial port #;
! #X obj 21 112 receive A;
! #X obj 122 112 receive B;
! #X obj 223 112 receive C;
! #X obj 91 58 receive E;
! #X obj 21 58 receive D;
! #X obj 161 58 receive F;
! #X obj 231 58 receive G;
! #X obj 301 58 receive H;
! #X obj 371 58 receive I;
! #X text 12 95 potentiometers:;
! #X text 10 39 pushbuttons;
! #X text 281 675 released under the GNU GPL;
! #X text 67 660 (C) Copyright 2006 Hans-Christoph Steiner hans@at.or.at
! ;
! #X obj 324 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
  -3754 -1 -1 0 256;
! #X obj 425 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 0 256;
! #X obj 526 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14
! -3754 -1 -1 0 256;
! #X obj 324 112 receive D;
! #X obj 425 112 receive E;
! #X obj 526 112 receive F;
! #X obj 65 383 spigot;
! #X obj 105 361 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
! 1;
! #X msg 160 220 close;
! #X obj 68 492 print --------------------;
! #X obj 67 434 select 10 65;
! #X obj 105 466 print A;
! #X obj 163 454 print;
! #X msg 164 259 devicename /dev/tty.usbserial-0B1;
! #N canvas 630 635 454 304 alternate 0;
! #X obj 87 8 inlet;
! #X obj 151 244 outlet;
! #X obj 319 247 outlet;
! #X obj 159 197 spigot;
! #X obj 319 191 spigot;
! #X obj 158 57 trigger anything bang;
! #X obj 196 152 abs;
! #X floatatom 212 198 5 0 0 0 - - -;
! #X obj 356 147 abs;
! #X msg 295 77 1;
! #X obj 196 173 float;
! #X obj 355 168 float;
! #X obj 86 34 route reset;
! #X msg 103 82 1;
! #X obj 356 128 -;
! #X msg 73 82 0;
! #X obj 196 133 -;
! #X obj 15 35 loadbang;
! #X obj 86 54 bang;
! #X connect 0 0 12 0;
! #X connect 3 0 1 0;
! #X connect 4 0 2 0;
! #X connect 5 0 3 0;
! #X connect 5 0 4 0;
! #X connect 5 1 9 0;
! #X connect 6 0 10 0;
! #X connect 8 0 11 0;
! #X connect 9 0 14 0;
! #X connect 9 0 16 0;
! #X connect 10 0 3 1;
! #X connect 10 0 7 0;
! #X connect 10 0 16 1;
! #X connect 11 0 4 1;
! #X connect 11 0 14 1;
! #X connect 12 0 18 0;
! #X connect 12 1 5 0;
! #X connect 13 0 14 1;
! #X connect 14 0 8 0;
! #X connect 15 0 16 1;
! #X connect 16 0 6 0;
! #X connect 17 0 13 0;
! #X connect 17 0 15 0;
! #X connect 18 0 13 0;
! #X connect 18 0 15 0;
! #X restore 286 465 pd alternate;
! #X msg 317 423 reset;
! #X obj 285 499 print HIGH;
! #X obj 365 498 print LOW;
! #X connect 11 0 12 0;
! #X connect 12 0 40 0;
! #X connect 19 0 11 0;
! #X connect 21 0 7 0;
! #X connect 22 0 8 0;
! #X connect 23 0 9 0;
! #X connect 24 0 2 0;
! #X connect 25 0 1 0;
! #X connect 26 0 3 0;
! #X connect 27 0 4 0;
! #X connect 28 0 5 0;
! #X connect 29 0 6 0;
! #X connect 37 0 34 0;
! #X connect 38 0 35 0;
! #X connect 39 0 36 0;
! #X connect 40 0 44 0;
! #X connect 41 0 40 1;
! #X connect 42 0 12 0;
! #X connect 44 0 43 0;
! #X connect 44 1 45 0;
! #X connect 44 2 46 0;
! #X connect 44 2 48 0;
! #X connect 47 0 12 0;
! #X connect 48 0 50 0;
! #X connect 48 1 51 0;
! #X connect 49 0 48 0;