Update of /cvsroot/pure-data/externals/hardware/arduino/Pd_firmware In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv23206
Added Files: Makefile Log Message: edited makefile from Arduino package to work with this firmware
--- NEW FILE: Makefile --- # Arduino makefile # # This makefile allows you to build sketches from the command line # without the Arduino environment (or Java). # # The Arduino environment does preliminary processing on a sketch before # compiling it. If you're using this makefile instead, you'll need to do # a few things differently: # # - Give your program's file a .cpp extension (e.g. foo.cpp). # # - Put this line at top of your code: #include <WProgram.h> # # - Write prototypes for all your functions (or define them before you # call them). A prototype declares the types of parameters a # function will take and what type of value it will return. This # means that you can have a call to a function before the definition # of the function. A function prototype looks like the first line of # the function, with a semi-colon at the end. For example: # int digitalRead(int pin); # # Instructions for using the makefile: # # 1. Copy this file into the folder with your sketch. # # 2. Below, modify the line containing "TARGET" to refer to the name of # of your program's file without an extension (e.g. TARGET = foo). # # 3. Modify the line containg "ARDUINO" to point the directory that # contains the Arduino core (for normal Arduino installations, this # is the lib/targets/arduino sub-directory). # # 4. Modify the line containing "PORT" to refer to the filename # representing the USB or serial connection to your Arduino board # (e.g. PORT = /dev/tty.USB0). If the exact name of this file # changes, you can use * as a wildcard (e.g. PORT = /dev/tty.USB*). # # 5. At the command line, change to the directory containing your # program's file and the makefile. # # 6. Type "make" and press enter to compile/verify your program. # # 7. Type "make upload", reset your Arduino board, and press enter to # upload your program to the Arduino board. # # $Id: Makefile,v 1.1 2007/02/28 03:51:51 eighthave Exp $
PORT = /dev/tty.usbserial-1* TARGET = Pd_firmware ARDUINO = /Applications/arduino-0007 ARDUINO_SRC = $(ARDUINO)/lib/targets/arduino INCLUDE = -I$(ARDUINO_SRC) -I$(ARDUINO)/tools/avr/avr/include SRC = $(ARDUINO_SRC)/pins_arduino.c $(ARDUINO_SRC)/wiring.c \ $(ARDUINO_SRC)/WInterrupts.c CXXSRC = applet/$(TARGET).cpp $(ARDUINO_SRC)/HardwareSerial.cpp \ $(ARDUINO_SRC)/WRandom.cpp MCU = atmega8 F_CPU = 16000000 FORMAT = ihex UPLOAD_RATE = 19200
# Name of this Makefile (used for "make depend"). MAKEFILE = Makefile
# Debugging format. # Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. # AVR (extended) COFF requires stabs, plus an avr-objcopy run. DEBUG = stabs
OPT = s
# Place -D or -U options here CDEFS = -DF_CPU=$(F_CPU) CXXDEFS = -DF_CPU=$(F_CPU)
# Compiler flag to set the C Standard level. # c89 - "ANSI" C # gnu89 - c89 plus GCC extensions # c99 - ISO C99 standard (not yet fully implemented) # gnu99 - c99 plus GCC extensions CSTANDARD = -std=gnu99 CDEBUG = -g$(DEBUG) CWARN = -Wall -Wstrict-prototypes CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
CFLAGS = $(CDEBUG) $(CDEFS) $(INCLUDE) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) CXXFLAGS = $(CDEFS) $(INCLUDE) -O$(OPT) #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs LDFLAGS =
# Programming support using avrdude. Settings and variables. AVRDUDE_PROGRAMMER = stk500 AVRDUDE_PORT = $(PORT) AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex AVRDUDE_FLAGS = -F -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ -b $(UPLOAD_RATE)
# Program settings CC = avr-gcc CXX = avr-g++ OBJCOPY = avr-objcopy OBJDUMP = avr-objdump SIZE = avr-size NM = avr-nm AVRDUDE = avrdude REMOVE = rm -f MV = mv -f
# Define all object files. OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o)
# Define all listing files. LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
# Combine all necessary flags and optional flags. # Add target processor to flags. ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
# Default target. all: build
build: applet_files elf hex
applet_files: test -d applet || mkdir applet echo '#include "WProgram.h"' > applet/$(TARGET).cpp echo '#include "avr/interrupt.h"' >> applet/$(TARGET).cpp sed -n 's|^(void .*)).*|\1;|p' Pd_firmware.pde | grep -v 'setup()' | \ grep -v 'loop()' >> applet/$(TARGET).cpp cat $(TARGET).pde >> applet/$(TARGET).cpp
elf: applet/$(TARGET).elf hex: applet/$(TARGET).hex eep: applet/$(TARGET).eep lss: applet/$(TARGET).lss sym: applet/$(TARGET).sym
# Program the device. upload: applet/$(TARGET).hex $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. COFFCONVERT=$(OBJCOPY) --debugging \ --change-section-address .data-0x800000 \ --change-section-address .bss-0x800000 \ --change-section-address .noinit-0x800000 \ --change-section-address .eeprom-0x810000
coff: applet/$(TARGET).elf $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf applet/$(TARGET).cof
extcoff: applet/$(TARGET).elf $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf applet/$(TARGET).cof
.SUFFIXES: .elf .hex .eep .lss .sym
.elf.hex: $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
.elf.eep: -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
# Create extended listing file from ELF output file. .elf.lss: $(OBJDUMP) -h -S $< > $@
# Create a symbol table from ELF output file. .elf.sym: $(NM) -n $< > $@
# Link: create ELF output file from object files. applet/$(TARGET).elf: $(OBJ) $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
# Compile: create object files from C++ source files. .cpp.o: $(CXX) -c $(ALL_CXXFLAGS) $< -o $@
# Compile: create object files from C source files. .c.o: $(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create assembler files from C source files. .c.s: $(CC) -S $(ALL_CFLAGS) $< -o $@
# Assemble: create object files from assembler source files. .S.o: $(CC) -c $(ALL_ASFLAGS) $< -o $@
# Target: clean project. clean: $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ $(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss \ $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
depend: if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ then \ sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ $(MAKEFILE).$$$$ && \ $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ fi echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ >> $(MAKEFILE); \ $(CC) -M -mmcu=$(MCU) $(CDEFS) $(INCLUDE) $(SRC) $(ASRC) >> $(MAKEFILE)
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend