last 20 errors ----------------------------------------
configure: error: required library 'flite_cmu_us_kal16' not found -- quitting
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
test -d /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
make[1]: *** [noncvs_install] Error 1
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-15/logs/2011-09-15_02.29.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
test -d /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
make[1]: *** [noncvs_install] Error 1
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-15/logs/2011-09-15_06.36.…
last 20 errors ----------------------------------------
configure: error: required library 'flite_cmu_us_kal16' not found -- quitting
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
test -d /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
make[1]: *** [noncvs_install] Error 1
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-15/logs/2011-09-15_02.29.…
last 20 errors ----------------------------------------
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
test -d /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
make[1]: *** [noncvs_install] Error 1
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-15/logs/2011-09-15_02.29.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
test -d /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
make[1]: *** [noncvs_install] Error 1
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-15/logs/2011-09-15_02.29.…
Revision: 15294
http://pure-data.svn.sourceforge.net/pure-data/?rev=15294&view=rev
Author: eighthave
Date: 2011-09-14 14:53:25 +0000 (Wed, 14 Sep 2011)
Log Message:
-----------
test whether noncvs exists before trying to install it
Modified Paths:
--------------
trunk/packages/Makefile
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
last 20 errors ----------------------------------------
configure: error: required library 'flite_cmu_us_kal16' not found -- quitting
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd: 3: can't cd to /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/
make[1]: *** [noncvs_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-14/logs/2011-09-14_06.34.…
last 20 errors ----------------------------------------
configure: error: required library 'flite_cmu_us_kal16' not found -- quitting
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
/bin/sh: 1: cd: can't cd to /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/
make[1]: *** [noncvs_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-14/logs/2011-09-14_02.48.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd: 3: can't cd to /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/
make[1]: *** [noncvs_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-14/logs/2011-09-14_06.34.…
last 20 errors ----------------------------------------
configure: error: required library 'flite_cmu_us_kal16' not found -- quitting
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
install -p "/home/pd/auto-build/pd-extended/pd/LICENSE.txt" "/home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/doc/manuals/Pd/Pd-LICENSE.txt"
install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/ && \
tar --exclude-vcs --create * | \
tar --extract --directory /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/lib/pd-extended/extra
cd: 3: can't cd to /home/pd/auto-build/pd-extended/packages/noncvs/linux/extra/
make[1]: *** [noncvs_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-09-14/logs/2011-09-14_02.48.…