Revision: 15119
http://pure-data.svn.sourceforge.net/pure-data/?rev=15119&view=rev
Author: eighthave
Date: 2011-06-28 22:10:37 +0000 (Tue, 28 Jun 2011)
Log Message:
-----------
add the 'startup' folder contents to the Windows installer and therefore .zip too
Modified Paths:
--------------
trunk/packages/win32_inno/pd-inno.iss.in
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
Revision: 15118
http://pure-data.svn.sourceforge.net/pure-data/?rev=15118&view=rev
Author: eighthave
Date: 2011-06-28 18:56:18 +0000 (Tue, 28 Jun 2011)
Log Message:
-----------
run the zip command in the cygwin sh to make sure its in its native env
Modified Paths:
--------------
trunk/packages/win32_inno/Makefile
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
last 20 errors ----------------------------------------
imageMAGICK.cpp:63:54: error: invalid conversion from ‘long unsigned int*’ to ‘size_t*’
imageMAGICK.cpp:63:54: error: initializing argument 2 of ‘char** MagickCore::GetMimeList(const char*, size_t*, MagickCore::ExceptionInfo*)’
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src/plugins'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_06.40.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_06.40.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_02.54.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_02.54.…
last 20 errors ----------------------------------------
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
last 15 lines ----------------------------------------
rm -f pix_drum.pd_darwin
test .libs/pix_drum.pd_darwin && ln -s .libs/pix_drum.pd_darwin pix_drum.pd_darwin
make[5]: Nothing to be done for `all-am'.
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[3]: *** [all-recursive] Error 1
make[2]: *** [/Users/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_darwin] Error 2
make[1]: *** [externals_install] Error 2
make: *** [extended_install] Error 2
ls: /Users/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory
upload specs darwin_app . dmg
Uploading
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync: connection unexpectedly closed (4 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_03.15.…
last 20 errors ----------------------------------------
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
id: cannot find name for user ID 1001
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
last 15 lines ----------------------------------------
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: README
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_02.54.…
last 20 errors ----------------------------------------
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
last 15 lines ----------------------------------------
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[4]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/pd/auto-build/pd-extended/externals/Gem/src'
make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_linux] Error 2
make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals'
make[1]: *** [externals_install] Error 2
make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages'
make: *** [install] Error 2
ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory
upload specs linux_make . deb
Uploading
Unexpected local arg: debian
If arg is a remote file/dir, prefix it with a colon (:).
rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_02.54.…
last 20 errors ----------------------------------------
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
configure.ac:1: error: Autoconf version 2.60 or higher is required
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
last 15 lines ----------------------------------------
rm -f pix_drum.pd_darwin
test .libs/pix_drum.pd_darwin && ln -s .libs/pix_drum.pd_darwin pix_drum.pd_darwin
make[5]: Nothing to be done for `all-am'.
make[4]: *** No rule to make target `Gem/libGem.la', needed by `Gem.la'. Stop.
make[3]: *** [all-recursive] Error 1
make[2]: *** [/Users/pd/auto-build/pd-extended/externals/Gem/src/Gem.pd_darwin] Error 2
make[1]: *** [externals_install] Error 2
make: *** [extended_install] Error 2
ls: /Users/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory
upload specs darwin_app . dmg
Uploading
ERROR: module is write only
rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7]
rsync: connection unexpectedly closed (4 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9]
the full logfile - if it has been succesfully uploaded - can be viewed at:
http://autobuild.puredata.info/auto-build/2011-06-28/logs/2011-06-28_03.15.…