Pd-cvs June 2011

pd-cvs@lists.iem.at

13 participants
201 discussions

autobuild: pd-extended ubuntu-natty-i386 2011-06-11 06.55.14
by pd＠ubuntu-dapper-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] last 15 lines ---------------------------------------- configure.ac:7: installing `./missing' Base/Makefile.am: installing `./depcomp' configure.ac:45: required file `extra/pix_drum/Makefile.in' not found autoreconf: automake failed with exit status: 1 make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1 make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals' make[1]: *** [externals_install] Error 2 make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages' make: *** [install] Error 2 ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory upload specs linux_make . deb Uploading Unexpected local arg: debian If arg is a remote file/dir, prefix it with a colon (:). rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_06.55.…

1 0

autobuild: pd-extended ubuntu-lucid-i386 2011-06-11 06.55.14
by pd＠ubuntu-dapper-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

1 0

SF.net SVN: pure-data:[15103] trunk/externals/pmpd/pmpd2d.c
by nusmuk＠users.sourceforge.net 11 Jun '11

11 Jun '11

Revision: 15103 http://pure-data.svn.sourceforge.net/pure-data/?rev=15103&view=rev Author: nusmuk Date: 2011-06-11 09:15:35 +0000 (Sat, 11 Jun 2011) Log Message: ----------- adding an offset for global damping in order to introduce nice (non physical) movement --Cette ligne, et les suivantes ci-dessous, seront ignor?\195?\169es-- M pmpd/pmpd2d.c Modified Paths: -------------- trunk/externals/pmpd/pmpd2d.c This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

1 0

autobuild: pd-extended macosx104-powerpc 2011-06-11 03.15.06
by pd＠macosx104-powerpc.idmi.poly.edu 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- ERROR: module is write only rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7] rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9] last 15 lines ---------------------------------------- configure.ac:101: installing `./config.sub' configure.ac:7: installing `./missing' Base/Makefile.am: installing `./depcomp' configure.ac:45: required file `extra/pix_drum/Makefile.in' not found autoreconf: automake failed with exit status: 1 make[2]: *** [/Users/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1 make[1]: *** [externals_install] Error 2 make: *** [extended_install] Error 2 ls: /Users/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory upload specs darwin_app . dmg Uploading ERROR: module is write only rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7] rsync: connection unexpectedly closed (4 bytes received so far) [receiver] rsync error: error in rsync protocol data stream (code 12) at /SourceCache/rsync/rsync-35.2/rsync/io.c(452) [receiver=2.6.9] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_03.15.…

1 0

autobuild: pd-extended windowsxp-i386 2011-06-11 03.31.01
by Windows XP Pd Build Server 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- rsync error: timeout in data send/receive (code 30) at io.c(137) [sender=3.0.7] rsync error: error in rsync protocol data stream (code 12) at /home/lapo/packaging/rsync-3.0.4-1/src/rsync-3.0.4/io.c(632) [receiver=3.0.4] rsync error: error in rsync protocol data stream (code 12) at /home/lapo/packaging/rsync-3.0.4-1/src/rsync-3.0.4/io.c(632) [generator=3.0.4] ERROR: module is write only rsync error: syntax or usage error (code 1) at main.c(711) [sender=3.0.7] rsync error: error in rsync protocol data stream (code 12) at /home/lapo/packaging/rsync-3.0.4-1/src/rsync-3.0.4/io.c(632) [receiver=3.0.4] The system cannot find the path specified. The system cannot find the path specified. The system cannot find the path specified. last 15 lines ---------------------------------------- /pd-settings.reg: line 4: flags=: command not found /pd-settings.reg: line 5: loadlib1=vanilla/list: No such file or directory /pd-settings.reg: line 6: loadlib2=vanilla: command not found /pd-settings.reg: line 7: loadlib3=extra: command not found /pd-settings.reg: line 8: loadlib4=Gem: command not found /pd-settings.reg: line 9: loadlib5=cyclone: command not found /pd-settings.reg: line 10: loadlib6=zexy: command not found /pd-settings.reg: line 11: nloadlib=6: command not found /pd-settings.reg: line 12: syntax error near unexpected token `;' /pd-settings.reg: line 12: `; delete any previous loadlib flags' C:\msys\1.0\home\pd\auto-build\pd-extended\packages\win32_inno>"bin\pd.exe" -font 10 -path "doc\vasp" -lib cyclone -lib Gem -lib OSC -lib vasp -lib xeq -lib xsample -listdev The system cannot find the path specified. /pd.ico: ./pd.ico: cannot execute binary file /pdpatch.ico: ./pdpatch.ico: cannot execute binary file the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_03.31.…

1 0

autobuild: pd-extended debian-wheezy-i386 2011-06-11 02.43.08
by pd＠debian-stable-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8] last 15 lines ---------------------------------------- configure.ac:7: installing `./missing' Base/Makefile.am: installing `./depcomp' configure.ac:45: required file `extra/pix_drum/Makefile.in' not found autoreconf: automake failed with exit status: 1 make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1 make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals' make[1]: *** [externals_install] Error 2 make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages' make: *** [install] Error 2 ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory upload specs linux_make . deb Uploading Unexpected local arg: README If arg is a remote file/dir, prefix it with a colon (:). rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_02.43.…

1 0

autobuild: pd-extended debian-squeeze-i386 2011-06-11 02.43.08
by pd＠debian-stable-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] last 15 lines ---------------------------------------- configure.ac:7: installing `./missing' Base/Makefile.am: installing `./depcomp' configure.ac:45: required file `extra/pix_drum/Makefile.in' not found autoreconf: automake failed with exit status: 1 make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1 make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals' make[1]: *** [externals_install] Error 2 make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages' make: *** [install] Error 2 ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory upload specs linux_make . deb Uploading Unexpected local arg: README If arg is a remote file/dir, prefix it with a colon (:). rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_02.43.…

1 0

autobuild: pd-extended ubuntu-natty-i386 2011-06-11 02.43.08
by pd＠debian-stable-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

last 20 errors ---------------------------------------- id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 id: cannot find name for user ID 1001 rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8] last 15 lines ---------------------------------------- configure.ac:7: installing `./missing' Base/Makefile.am: installing `./depcomp' configure.ac:45: required file `extra/pix_drum/Makefile.in' not found autoreconf: automake failed with exit status: 1 make[2]: *** [/home/pd/auto-build/pd-extended/externals/Gem/src/configure] Error 1 make[2]: Leaving directory `/home/pd/auto-build/pd-extended/externals' make[1]: *** [externals_install] Error 2 make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages' make: *** [install] Error 2 ls: cannot access /home/pd/auto-build/pd-extended/packages/linux_make/./Pd*.deb: No such file or directory upload specs linux_make . deb Uploading Unexpected local arg: README If arg is a remote file/dir, prefix it with a colon (:). rsync error: syntax or usage error (code 1) at main.c(1246) [Receiver=3.0.8] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-11/logs/2011-06-11_02.43.…

1 0

autobuild: pd-extended debian-lenny-i386 2011-06-11 02.43.08
by pd＠debian-stable-i386.idmi.poly.edu 11 Jun '11

11 Jun '11

1 0

autobuild: pd-extended-release ubuntu-natty-i386 2011-06-10 06.36.05
by pd＠ubuntu-dapper-i386.idmi.poly.edu 10 Jun '11

10 Jun '11

last 20 errors ---------------------------------------- /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000710 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000b00 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000690 rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] configure: error: required library 'flite_cmu_us_kal16' not found -- quitting /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005f0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000670 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000690 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005b0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005b0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000630 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000630 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005b0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005b0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000570 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 0000000000000660 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000009c0 /usr/bin/ld: warning: cannot find entry symbol xport_dynamic; defaulting to 00000000000005f0 dpkg-deb: error: parsing file '/home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN/control' near line 7: rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] last 15 lines ---------------------------------------- cp /home/pd/auto-build/pd-extended-release/packages/linux_make/debian/pd-extended.postrm /home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN cp /home/pd/auto-build/pd-extended-release/packages/linux_make/debian/pd-extended.postinst /home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN sed -i 's|^Architecture:.*|Architecture: i386|' \ /home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN/control sed -i 's!^\(Depends:.*\)!\1 , libc6 (>= 2.3.6-6~), libc6 (>= 2.8), libdv4, libfftw3-3, libftgl2 (>= 2.1.3~rc5), libgcc1 (>= 1:4.1.1), libgl1-mesa-glx | libgl1, libglib2.0-0 (>= 2.24.0), libglu1-mesa | libglu1, libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libmagick++3 (>= 7:6.6.2.6), libmagickcore3 (>= 7:6.6.2.6), libmp3lame0, libmpeg3-1 (>= 1.5.4), libogg0 (>= 1.0rc3), libquicktime1 (>= 2:1.1.1+debian), libstdc++6 (>= 4.5), libv4l-0 (>= 0.5.0), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libx11-6, libxext6, libxxf86vm1, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0), zlib1g (>= 1:1.1.4) , freeglut3, libbz2-1.0, libc6 (>= 2.7), libdv4, libfreetype6 (>= 2.2.1), libgcc1 (>= 1:4.1.1), libgl1-mesa-glx | libgl1, libglu1-mesa | libglu1, libgsl0ldbl (>= 1.9), libimlib2, libmp3lame0, libogg0 (>= 1.0rc3), libpng12-0 (>= 1.2.13-4), libquicktime1 (>= 2:1.1.1+debian), libsdl1.2debian (>= 1.2.10-1), libspeex1 (>= 1.2~beta3-1), libstdc++6 (>= 4.1.1), libtheora 0 (>= 0.0.0.alpha7.dfsg), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libx11-6, libxext6, libxv1, zlib1g (>= 1:1.1.4)!' /home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN/control fakeroot dpkg-deb --build /home/pd/auto-build/pd-extended-release/packages/linux_make/build/ /home/pd/auto-build/pd-extended-release/packages/linux_make/Pd-0.42.5-extended.deb dpkg-deb: error: parsing file '/home/pd/auto-build/pd-extended-release/packages/linux_make/build//DEBIAN/control' near line 7: missing package name make: *** [deb] Error 2 ls: cannot access /home/pd/auto-build/pd-extended-release/packages/linux_make/./Pd*.deb: No such file or directory upload specs linux_make . deb Uploading Unexpected local arg: debian If arg is a remote file/dir, prefix it with a colon (:). rsync error: syntax or usage error (code 1) at main.c(1236) [Receiver=3.0.7] the full logfile - if it has been succesfully uploaded - can be viewed at: http://autobuild.puredata.info/auto-build/2011-06-10/logs/2011-06-10_06.36.…

1 0

← Newer
1
...
14
15
16
17
18
19
20
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Pd-cvs June 2011