Pd-cvs February 2007

pd-cvs@lists.iem.at

17 participants
200 discussions

autobuild: pd-extended fedoracore4-i386 2007-02-23 04.02.19
by pd＠fedoracore4-i386.idmi.poly.edu 23 Feb '07

23 Feb '07

install -p /home/pd/auto-build/pd-extended/doc/pddp/*.pd /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/5.reference install -p /home/pd/auto-build/pd-extended/doc/pddp/keyboard_fun.txt /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/5.reference install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/PdDrums install -p /home/pd/auto-build/pd-extended/doc/tutorials/footils/pddrums/*.* /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/PdDrums install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/PlayNow install -p /home/pd/auto-build/pd-extended/doc/tutorials/playnow/*.* /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/PlayNow install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/Cognition install -p /home/pd/auto-build/pd-extended/doc/tutorials/cognition/*.* /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/Cognition install -d /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/0.Intro install -p /home/pd/auto-build/pd-extended/doc/tutorials/intro/*.* /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/0.Intro install -p /home/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd /home/pd/auto-build/pd-extended/packages/linux_make/build//usr/local/lib/pd/doc/manuals/0.Intro install: cannot stat `/home/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd': No such file or directory make[2]: *** [tutorials_install] Error 1 make[2]: Leaving directory `/home/pd/auto-build/pd-extended/doc' make[1]: *** [doc_install] Error 2 make[1]: Leaving directory `/home/pd/auto-build/pd-extended/packages' make: *** [install] Error 2 upload specs linux_make build tar.bz2 Uploading /home/pd/auto-build/pd-extended/packages/linux_make/build/Pd*.tar.bz2 ls: /home/pd/auto-build/pd-extended/packages/linux_make/build/Pd*.tar.bz2: No such file or directory

1 0

autobuild: pd-extended macosx104-powerpc 2007-02-23 03.15.03
by pd＠macosx104-powerpc.idmi.poly.edu 23 Feb '07

23 Feb '07

Including 4.msg_from_tcl in pd-msg Including 5.examples in pd-msg install -p /Users/pd/auto-build/pd-extended/doc/pddp/*.pd /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/5.reference install -p /Users/pd/auto-build/pd-extended/doc/pddp/keyboard_fun.txt /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/5.reference install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/PdDrums install -p /Users/pd/auto-build/pd-extended/doc/tutorials/footils/pddrums/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/PdDrums install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/PlayNow install -p /Users/pd/auto-build/pd-extended/doc/tutorials/playnow/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/PlayNow install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/Cognition install -p /Users/pd/auto-build/pd-extended/doc/tutorials/cognition/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/Cognition install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/0.Intro install -p /Users/pd/auto-build/pd-extended/doc/tutorials/intro/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/0.Intro install -p /Users/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-23.app/Contents/Resources/doc/manuals/0.Intro install: /Users/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd: No such file or directory make[2]: *** [tutorials_install] Error 71 make[1]: *** [doc_install] Error 2 make: *** [extended_install] Error 2 upload specs darwin_app . dmg Uploading /home/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg ls: /home/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory

1 0

autobuild: pd-main macosx104-powerpc 2007-02-23 03.15.03
by pd＠macosx104-powerpc.idmi.poly.edu 23 Feb '07

23 Feb '07

_sleep referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _socket referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _strcspn referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _task_get_special_port referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_terminate referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _vsnprintf referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _write referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _AudioConvertNanosToHostTime referenced from Jack expected to be defined in /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio _pthread_create referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_info referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_policy_set referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib collect2: ld returned 1 exit status /usr/bin/ld: for architecture ppc /usr/bin/ld: warning multiple definitions of symbol _jack_error s_audio_jack.o definition of _jack_error in section (__TEXT,__text) /Library/Frameworks/Jack.framework/Jack(single module) definition of _jack_error lipo: can't open input file: /var/tmp//ccUyjmHt.out (No such file or directory) make[2]: *** [../bin/pd] Error 1 make[1]: *** [pd_install] Error 2 make: *** [darwin_app_core] Error 2

1 0

autobuild: pd-extended ubuntu-dapper-i386 2007-02-22 07.37.44
by pd＠ubuntu-dapper-i386.idmi.poly.edu 22 Feb '07

22 Feb '07

1 0

autobuild: pd-extended debian-testing-powerpc 2007-02-22 06.27.05
by pd＠debian-testing-powerpc.idmi.poly.edu 22 Feb '07

22 Feb '07

1 0

autobuild: pd-extended fedoracore4-i386 2007-02-22 04.02.20
by pd＠fedoracore4-i386.idmi.poly.edu 22 Feb '07

22 Feb '07

1 0

autobuild: pd-extended macosx104-powerpc 2007-02-22 03.15.03
by pd＠macosx104-powerpc.idmi.poly.edu 22 Feb '07

22 Feb '07

Including 4.msg_from_tcl in pd-msg Including 5.examples in pd-msg install -p /Users/pd/auto-build/pd-extended/doc/pddp/*.pd /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/5.reference install -p /Users/pd/auto-build/pd-extended/doc/pddp/keyboard_fun.txt /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/5.reference install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/PdDrums install -p /Users/pd/auto-build/pd-extended/doc/tutorials/footils/pddrums/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/PdDrums install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/PlayNow install -p /Users/pd/auto-build/pd-extended/doc/tutorials/playnow/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/PlayNow install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/Cognition install -p /Users/pd/auto-build/pd-extended/doc/tutorials/cognition/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/Cognition install -d /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/0.Intro install -p /Users/pd/auto-build/pd-extended/doc/tutorials/intro/*.* /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/0.Intro install -p /Users/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd /Users/pd/auto-build/pd-extended/packages/darwin_app/build/Pd-0.40.2-extended-2007-02-22.app/Contents/Resources/doc/manuals/0.Intro install: /Users/pd/auto-build/pd-extended/abstractions/pddp/0-pager.pd: No such file or directory make[2]: *** [tutorials_install] Error 71 make[1]: *** [doc_install] Error 2 make: *** [extended_install] Error 2 upload specs darwin_app . dmg Uploading /home/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg ls: /home/pd/auto-build/pd-extended/packages/darwin_app/./Pd*.dmg: No such file or directory

1 0

autobuild: pd-main macosx104-powerpc 2007-02-22 03.15.03
by pd＠macosx104-powerpc.idmi.poly.edu 22 Feb '07

22 Feb '07

_sleep referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _socket referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _strcspn referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _task_get_special_port referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_terminate referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _vsnprintf referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _write referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _AudioConvertNanosToHostTime referenced from Jack expected to be defined in /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio _pthread_create referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_info referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib _thread_policy_set referenced from Jack expected to be defined in /usr/lib/libSystem.B.dylib collect2: ld returned 1 exit status /usr/bin/ld: for architecture ppc /usr/bin/ld: warning multiple definitions of symbol _jack_error s_audio_jack.o definition of _jack_error in section (__TEXT,__text) /Library/Frameworks/Jack.framework/Jack(single module) definition of _jack_error lipo: can't open input file: /var/tmp//ccROPoIA.out (No such file or directory) make[2]: *** [../bin/pd] Error 1 make[1]: *** [pd_install] Error 2 make: *** [darwin_app_core] Error 2

1 0

externals/hardware/arduino/Pd_firmware Pd_firmware.pde, 1.23, 1.24
by Hans-Christoph Steiner 22 Feb '07

22 Feb '07

Update of /cvsroot/pure-data/externals/hardware/arduino/Pd_firmware In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv15679/Pd_firmware Modified Files: Pd_firmware.pde Log Message: - got analog input working - version reporting works, but checkInput() isn't run enough, so it misses the data if there is a lot of traffic on the serial port Index: Pd_firmware.pde =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/Pd_firmware/Pd_firmware.pde,v retrieving revision 1.23 retrieving revision 1.24 diff -C2 -d -r1.23 -r1.24 *** Pd_firmware.pde 20 Feb 2007 06:25:56 -0000 1.23 --- Pd_firmware.pde 22 Feb 2007 06:16:43 -0000 1.24 *************** *** 169,173 **** #define MINOR_VERSION 0 // for backwards compatible changes ! /* total number of digital pins supported */ #define TOTAL_DIGITAL_PINS 14 --- 169,174 ---- #define MINOR_VERSION 0 // for backwards compatible changes ! /* total number of pins currently supported */ ! #define TOTAL_ANALOG_PINS 16 #define TOTAL_DIGITAL_PINS 14 *************** *** 207,210 **** --- 208,214 ---- int pwmStatus = 0; + /* bit-wise array to store pin reporting */ + unsigned int analogPinsToReport = 65536; + /*========================================================================== *************** *** 216,230 **** */ void outputDigitalBytes(byte pin0_6, byte pin7_13) { ! int i; ! int mask; ! int twoBytesForPorts; ! ! twoBytesForPorts = pin0_6 + (pin7_13 << 7); ! for(i=0; i<14; ++i) { ! mask = 1 << i; ! if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) { ! digitalWrite(i, twoBytesForPorts & mask); ! } ! } } --- 220,234 ---- */ void outputDigitalBytes(byte pin0_6, byte pin7_13) { ! int i; ! int mask; ! int twoBytesForPorts; ! ! twoBytesForPorts = pin0_6 + (pin7_13 << 7); ! for(i=0; i<14; ++i) { ! mask = 1 << i; ! if( (digitalPinStatus & mask) && !(pwmStatus & mask) ) { ! digitalWrite(i, twoBytesForPorts & mask); ! } ! } } *************** *** 234,291 **** */ void processInput(int inputData) { ! int command, channel; ! // a few commands have byte(s) of data following the command ! if( (waitForData > 0) && (inputData < 128) ) { ! waitForData--; ! storedInputData[waitForData] = inputData; ! if( (waitForData==0) && executeMultiByteCommand ) { ! //we got everything ! switch(executeMultiByteCommand) { ! case ANALOG_MESSAGE: ! channel = inputData & 0x0F; // get channel from command byte ! break; ! case DIGITAL_MESSAGE: ! outputDigitalBytes(storedInputData[1], storedInputData[0]); ! break; ! case SET_DIGITAL_PIN_MODE: ! setPinMode(storedInputData[1], storedInputData[0]); ! break; ! case REPORT_ANALOG_PIN: ! break; ! case REPORT_DIGITAL_PORTS: ! break; ! } ! executeMultiByteCommand = 0; ! } ! } else { ! // remove channel info from command byte if less than 0xF0 ! if(inputData < 0xF0) { ! command = inputData & 0xF0; ! } else { ! command = inputData; ! } ! switch (inputData) { ! case ANALOG_MESSAGE: ! case DIGITAL_MESSAGE: ! case SET_DIGITAL_PIN_MODE: ! waitForData = 2; // two data bytes needed ! executeMultiByteCommand = inputData; ! break; ! case REPORT_ANALOG_PIN: ! case REPORT_DIGITAL_PORTS: ! waitForData = 1; // two data bytes needed ! executeMultiByteCommand = inputData; ! break; ! case SYSTEM_RESET: ! // this doesn't do anything yet ! break; ! case REPORT_VERSION: ! Serial.print(REPORT_VERSION, BYTE); ! Serial.print(MAJOR_VERSION, BYTE); ! Serial.print(MINOR_VERSION, BYTE); ! break; ! } ! } } --- 238,295 ---- */ void processInput(int inputData) { ! int command, channel; ! // a few commands have byte(s) of data following the command ! if( (waitForData > 0) && (inputData < 128) ) { ! waitForData--; ! storedInputData[waitForData] = inputData; ! if( (waitForData==0) && executeMultiByteCommand ) { ! //we got everything ! switch(executeMultiByteCommand) { ! case ANALOG_MESSAGE: ! channel = inputData & 0x0F; // get channel from command byte ! break; ! case DIGITAL_MESSAGE: ! outputDigitalBytes(storedInputData[1], storedInputData[0]); ! break; ! case SET_DIGITAL_PIN_MODE: ! setPinMode(storedInputData[1], storedInputData[0]); ! break; ! case REPORT_ANALOG_PIN: ! break; ! case REPORT_DIGITAL_PORTS: ! break; ! } ! executeMultiByteCommand = 0; ! } ! } else { ! // remove channel info from command byte if less than 0xF0 ! if(inputData < 0xF0) { ! command = inputData & 0xF0; ! } else { ! command = inputData; ! } ! switch (inputData) { ! case ANALOG_MESSAGE: ! case DIGITAL_MESSAGE: ! case SET_DIGITAL_PIN_MODE: ! waitForData = 2; // two data bytes needed ! executeMultiByteCommand = inputData; ! break; ! case REPORT_ANALOG_PIN: ! case REPORT_DIGITAL_PORTS: ! waitForData = 1; // two data bytes needed ! executeMultiByteCommand = inputData; ! break; ! case SYSTEM_RESET: ! // this doesn't do anything yet ! break; ! case REPORT_VERSION: ! Serial.print(REPORT_VERSION, BYTE); ! Serial.print(MINOR_VERSION, BYTE); ! Serial.print(MAJOR_VERSION, BYTE); ! break; ! } ! } } *************** *** 301,306 **** */ void checkForInput() { ! if(Serial.available()) ! processInput( Serial.read() ); } --- 305,310 ---- */ void checkForInput() { ! if(Serial.available()) ! processInput( Serial.read() ); } *************** *** 310,329 **** */ void setPinMode(byte pin, byte mode) { ! if(mode == INPUT) { ! digitalPinStatus = digitalPinStatus &~ (1 << pin); ! pwmStatus = pwmStatus &~ (1 << pin); ! pinMode(pin,INPUT); ! } ! else if(mode == OUTPUT) { ! digitalPinStatus = digitalPinStatus | (1 << pin); ! pwmStatus = pwmStatus &~ (1 << pin); ! pinMode(pin,OUTPUT); ! } ! else if( mode == PWM ) { ! digitalPinStatus = digitalPinStatus | (1 << pin); ! pwmStatus = pwmStatus | (1 << pin); ! pinMode(pin,OUTPUT); ! } ! // TODO: save status to EEPROM here, if changed } --- 314,333 ---- */ void setPinMode(byte pin, byte mode) { ! if(mode == INPUT) { ! digitalPinStatus = digitalPinStatus &~ (1 << pin); ! pwmStatus = pwmStatus &~ (1 << pin); ! pinMode(pin,INPUT); ! } ! else if(mode == OUTPUT) { ! digitalPinStatus = digitalPinStatus | (1 << pin); ! pwmStatus = pwmStatus &~ (1 << pin); ! pinMode(pin,OUTPUT); ! } ! else if( mode == PWM ) { ! digitalPinStatus = digitalPinStatus | (1 << pin); ! pwmStatus = pwmStatus | (1 << pin); ! pinMode(pin,OUTPUT); ! } ! // TODO: save status to EEPROM here, if changed } *************** *** 332,342 **** // used for flashing the pin for the version number void pin13strobe(int count, int onInterval, int offInterval) { ! byte i; ! for(i=0; i<count; i++) { ! digitalWrite(13,1); ! delay(onInterval); ! digitalWrite(13,0); ! delay(offInterval); ! } } --- 336,346 ---- // used for flashing the pin for the version number void pin13strobe(int count, int onInterval, int offInterval) { ! byte i; ! for(i=0; i<count; i++) { ! digitalWrite(13,1); ! delay(onInterval); ! digitalWrite(13,0); ! delay(offInterval); ! } } *************** *** 345,372 **** *==========================================================================*/ void setup() { ! byte i; ! // TODO: load state from EEPROM here ! Serial.begin(115200); // 9600, 14400, 38400, 57600, 115200 ! /* TODO: send digital inputs here, if enabled, to set the initial state on the ! * host computer, since once in the loop(), the Arduino will only send data on ! * change. */ ! // flash the pin 13 with the protocol minor version (add major once > 0) ! pinMode(13,OUTPUT); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(500); ! pin13strobe(MAJOR_VERSION, 200, 400); ! delay(500); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(500); ! pin13strobe(MINOR_VERSION, 200, 400); ! delay(500); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(1000); ! for(i=0; i<TOTAL_DIGITAL_PINS; ++i) { ! setPinMode(i,OUTPUT); ! } } --- 349,376 ---- *==========================================================================*/ void setup() { ! byte i; ! // TODO: load state from EEPROM here ! Serial.begin(115200); // 9600, 14400, 38400, 57600, 115200 ! /* TODO: send digital inputs here, if enabled, to set the initial state on the ! * host computer, since once in the loop(), the Arduino will only send data on ! * change. */ ! // flash the pin 13 with the protocol minor version (add major once > 0) ! pinMode(13,OUTPUT); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(500); ! pin13strobe(MAJOR_VERSION, 200, 400); ! delay(500); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(500); ! pin13strobe(MINOR_VERSION, 200, 400); ! delay(500); ! pin13strobe(10,5,20); // separator, a quick burst ! delay(1000); ! for(i=0; i<TOTAL_DIGITAL_PINS; ++i) { ! setPinMode(i,OUTPUT); ! } } *************** *** 375,379 **** *==========================================================================*/ void loop() { ! ! checkForInput(); } --- 379,399 ---- *==========================================================================*/ void loop() { ! int i; // counter for analog pins ! int analogData; ! ! checkForInput(); ! /* get analog in, for the number enabled */ ! for(i=0; i<TOTAL_ANALOG_PINS; ++i) { ! checkForInput(); ! //if( analogPinsToReport & (1 << i) ) { ! analogData = analogRead(i); ! /* These two bytes get converted back into the whole number on host. ! Highest bits should be zeroed so the 8th bit doesn't get set */ ! checkForInput(); ! Serial.print(ANALOG_MESSAGE + i, BYTE); ! Serial.print(analogData % 128, BYTE); // mod by 32 for the small byte ! Serial.print(analogData >> 7, BYTE); // shift high bits into output byte ! //} ! checkForInput(); ! } }

1 0

externals/hardware/arduino arduino-test.pd, 1.7, 1.8 arduino.pd, 1.20, 1.21
by Hans-Christoph Steiner 22 Feb '07

22 Feb '07

Update of /cvsroot/pure-data/externals/hardware/arduino In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv15679 Modified Files: arduino-test.pd arduino.pd Log Message: - got analog input working - version reporting works, but checkInput() isn't run enough, so it misses the data if there is a lot of traffic on the serial port Index: arduino.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/arduino.pd,v retrieving revision 1.20 retrieving revision 1.21 diff -C2 -d -r1.20 -r1.21 *** arduino.pd 6 Dec 2006 03:29:06 -0000 1.20 --- arduino.pd 22 Feb 2007 06:16:43 -0000 1.21 *************** *** 1,11 **** ! #N canvas 497 22 624 356 10; ! #X obj 323 8 import hardware flatspace iemlib mapping; ! #X text 415 317 released under the GNU GPL; ! #X text 10 317 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> ! ; ! #X obj 11 61 inlet; ! #X obj 10 281 outlet; ! #X obj 494 281 outlet; ! #N canvas 382 102 637 357 command 0; #X obj 24 7 inlet; #X obj 281 289 outlet; --- 1,9 ---- ! #N canvas 602 43 640 372 10; ! #X obj 377 9 import hardware flatspace iemlib mapping; ! #X text 321 336 released under the GNU GPL; ! #X obj 61 19 inlet; ! #X obj 61 297 outlet; ! #X obj 544 297 outlet; ! #N canvas 382 102 653 373 command 0; #X obj 24 7 inlet; #X obj 281 289 outlet; *************** *** 83,87 **** #X obj 139 133 + 160; #X obj 210 135 + 150; ! #N canvas 291 228 424 356 pwm 0; #X obj 44 14 inlet; #X msg 327 220 251; --- 81,85 ---- #X obj 139 133 + 160; #X obj 210 135 + 150; ! #N canvas 291 228 432 364 pwm 0; #X obj 44 14 inlet; #X msg 327 220 251; *************** *** 90,94 **** #X obj 232 164 clip 0 1; #X obj 232 205 int; ! #N canvas 0 22 458 308 list-rev 0; #X obj 92 29 inlet; #N canvas 0 22 533 407 drip 0; --- 88,92 ---- #X obj 232 164 clip 0 1; #X obj 232 205 int; ! #N canvas 0 22 462 312 list-rev 0; #X obj 92 29 inlet; #N canvas 0 22 533 407 drip 0; *************** *** 158,166 **** #X restore 24 94 pd pwm; #X msg 359 93 info; - #X msg 483 118 240; #X obj 412 91 route digital version; #X obj 24 51 route pwm analog analogIns digitalIns pinMode info; #X obj 139 93 clip 0 9; ! #X connect 0 0 12 0; #X connect 2 0 3 0; #X connect 3 0 7 0; --- 156,164 ---- #X restore 24 94 pd pwm; #X msg 359 93 info; #X obj 412 91 route digital version; #X obj 24 51 route pwm analog analogIns digitalIns pinMode info; #X obj 139 93 clip 0 9; ! #X msg 473 118 249; ! #X connect 0 0 11 0; #X connect 2 0 3 0; #X connect 3 0 7 0; *************** *** 171,241 **** #X connect 8 0 1 0; #X connect 9 0 1 0; ! #X connect 10 0 1 0; ! #X connect 11 0 4 0; ! #X connect 11 1 10 0; ! #X connect 11 2 1 0; ! #X connect 12 0 8 0; ! #X connect 12 2 13 0; ! #X connect 12 3 2 0; ! #X connect 12 4 5 0; ! #X connect 12 5 9 0; ! #X connect 12 6 11 0; ! #X connect 13 0 6 0; ! #X restore 11 92 pd command processing; ! #X text 257 282 DEBUG/RAW data (this will change); ! #X obj 379 59 inlet; ! #X text 354 40 raw input; ! #X text 10 39 processed input; ! #N canvas 505 101 491 417 make 0; ! #X obj 37 8 inlet; ! #X obj 37 37 moses 128; ! #X obj 65 135 float; ! #N canvas 382 81 514 364 alternate 0; ! #X obj 34 280 outlet; ! #X obj 209 277 outlet; ! #X obj 34 210 spigot; ! #X obj 209 204 spigot; ! #X obj 33 87 trigger anything bang; ! #X msg 175 107 1; ! #X obj 71 186 float; ! #X obj 245 181 float; ! #X obj 357 41 loadbang; ! #X obj 342 74 bang; ! #X obj 246 158 !=; ! #X obj 71 163 !=; ! #X obj 342 7 inlet; ! #X text 384 6 reset; ! #X obj 33 12 inlet; ! #X msg 329 102 1; ! #X msg 359 102 0; ! #X connect 2 0 0 0; ! #X connect 3 0 1 0; ! #X connect 4 0 2 0; #X connect 4 0 3 0; ! #X connect 4 1 5 0; ! #X connect 5 0 10 0; ! #X connect 5 0 11 0; ! #X connect 6 0 2 1; ! #X connect 6 0 11 1; ! #X connect 7 0 3 1; ! #X connect 7 0 10 1; #X connect 8 0 9 0; #X connect 9 0 16 0; ! #X connect 9 0 15 0; ! #X connect 10 0 7 0; ! #X connect 11 0 6 0; ! #X connect 12 0 9 0; ! #X connect 14 0 4 0; ! #X connect 15 0 11 1; ! #X connect 16 0 10 1; ! #X restore 37 81 pd alternate; ! #X obj 37 114 trigger bang float; ! #X obj 116 61 bang; ! #X obj 131 322 outlet; ! #X obj 223 322 print UNKNOWN_INPUT_COMMAND; ! #X obj 65 155 pack float float float; ! #X obj 65 198 route 240 151; ! #X msg 20 247 version \$2 \$1; ! #N canvas 123 202 614 291 digital 0; #X obj 163 16 inlet; #X obj 252 255 outlet; --- 169,267 ---- #X connect 8 0 1 0; #X connect 9 0 1 0; ! #X connect 10 0 4 0; ! #X connect 10 1 13 0; ! #X connect 10 2 1 0; ! #X connect 11 0 8 0; ! #X connect 11 2 12 0; ! #X connect 11 3 2 0; ! #X connect 11 4 5 0; ! #X connect 11 5 9 0; ! #X connect 11 6 10 0; ! #X connect 12 0 6 0; ! #X connect 13 0 1 0; ! #X restore 61 52 pd command processing; ! #X obj 319 19 inlet; ! #X text 306 1 raw input; ! #X text 57 1 processed input; ! #X obj 61 136 comport \$1 115200; ! #X obj 410 88 loadbang; ! #N canvas 0 22 454 304 report 0; ! #X obj 95 26 inlet; ! #X obj 97 186 print [arduino]; ! #X msg 93 87 version_1.0; ! #X connect 0 0 2 0; ! #X connect 2 0 1 0; ! #X restore 410 112 pd report object version; ! #N canvas 0 22 466 316 report 0; ! #X obj 66 7 inlet; ! #X obj 66 36 route open; ! #X obj 66 60 select 1; ! #X obj 67 147 outlet; ! #X msg 66 82 version; ! #X connect 0 0 1 0; ! #X connect 1 0 2 0; ! #X connect 2 0 4 0; #X connect 4 0 3 0; ! #X restore 231 113 pd report firmware version; ! #X text 335 299 DEBUG/RAW data (this will change); ! #N canvas 72 70 439 393 make 0; ! #X obj 79 6 inlet; ! #X obj 184 337 outlet; ! #X obj 79 72 moses 128; ! #X obj 130 96 trigger float float; ! #N canvas 102 52 649 354 set 0; ! #X obj 26 3 inlet; ! #X obj 34 307 outlet; ! #X text 85 31 0xF0; ! #X obj 26 31 moses 240; ! #X text 79 307 length in byte count; ! #X obj 431 254 select 240 247; ! #X text 522 256 SysEx; ! #X msg 291 122 2; ! #X obj 26 60 & 240; ! #X obj 26 101 select 144 160 176 192 208 224; ! #X text 29 86 0x90 0xA0 0xB0 0xC0 0xD0 0xE0; ! #X msg 251 122 2; ! #X text 283 83 0xF4 0xF9; ! #X obj 251 101 select 244 249; ! #X obj 281 199 print [arduino]_WARNING_currently_unsupported; ! #X msg 55 122 160; ! #X msg 26 122 2; ! #X msg 85 122 176; ! #X msg 114 122 1; ! #X msg 144 122 1; ! #X msg 173 122 2; ! #X connect 0 0 3 0; ! #X connect 3 0 8 0; ! #X connect 3 1 13 0; ! #X connect 7 0 1 0; #X connect 8 0 9 0; #X connect 9 0 16 0; ! #X connect 9 1 15 0; ! #X connect 9 2 17 0; ! #X connect 9 3 18 0; ! #X connect 9 4 19 0; ! #X connect 9 5 20 0; ! #X connect 11 0 1 0; ! #X connect 13 0 11 0; ! #X connect 13 1 7 0; ! #X connect 13 2 14 0; ! #X connect 15 0 14 0; ! #X connect 16 0 1 0; ! #X connect 17 0 14 0; ! #X connect 18 0 1 0; ! #X connect 19 0 1 0; ! #X connect 20 0 1 0; ! #X restore 241 123 pd set message length; ! #X obj 184 258 mapping/tolist; ! #X obj 79 210 select 0; ! #X obj 79 188 float; ! #X obj 117 188 - 1; ! #X obj 79 128 trigger bang float; ! #X text 140 72 only process command bytes; ! #N canvas 0 22 470 320 convert 0; ! #X obj 142 218 outlet; ! #X obj 257 218 print UNKNOWN_INPUT_COMMAND; ! #N canvas 123 202 626 303 digital 0; #X obj 163 16 inlet; #X obj 252 255 outlet; *************** *** 290,383 **** #X connect 18 0 4 0; #X connect 19 0 4 0; ! #X restore 123 247 pd digital messages; ! #N canvas 81 317 535 449 analog 0; ! #X obj 85 6 inlet; ! #X obj 63 383 outlet; ! #X obj 85 47 moses 161; ! #X obj 143 65 moses 170; ! #X obj 141 160 list; ! #X obj 385 383 outlet; ! #X msg 347 141 2; ! #X msg 219 141 1; ! #X obj 233 114 trigger bang bang; ! #X msg 63 360 analog \$1 \$2; ! #X obj 63 339 pack float float; ! #X text 241 384 unprocessed messages; ! #X obj 140 241 unpack float float float; ! #X obj 63 114 trigger float bang bang; ! #X obj 303 260 << 7; ! #X obj 221 285 +; ! #X obj 221 306 / 1023; ! #X obj 63 143 - 161; ! #X obj 85 26 trigger anything anything; ! #X obj 386 217 spigot; ! #X obj 423 198 == 2; ! #X obj 140 222 spigot; ! #X obj 177 203 == 1; ! #X obj 254 59 print ANYTHING; ! #X connect 0 0 18 0; ! #X connect 2 0 8 0; #X connect 2 1 3 0; ! #X connect 3 0 13 0; ! #X connect 3 1 8 0; ! #X connect 4 0 19 0; ! #X connect 4 0 21 0; ! #X connect 6 0 20 0; ! #X connect 6 0 22 0; ! #X connect 7 0 22 0; ! #X connect 7 0 20 0; ! #X connect 8 0 4 0; ! #X connect 8 1 6 0; ! #X connect 9 0 1 0; ! #X connect 10 0 9 0; ! #X connect 12 1 15 0; ! #X connect 12 2 14 0; ! #X connect 13 0 17 0; ! #X connect 13 1 4 0; ! #X connect 13 2 7 0; ! #X connect 14 0 15 1; ! #X connect 15 0 16 0; ! #X connect 16 0 10 1; ! #X connect 17 0 10 0; ! #X connect 18 0 2 0; ! #X connect 18 1 4 1; ! #X connect 19 0 5 0; ! #X connect 20 0 19 1; ! #X connect 21 0 12 0; ! #X connect 22 0 21 1; ! #X restore 266 246 pd analog messages; #X connect 0 0 1 0; ! #X connect 1 0 3 0; ! #X connect 1 1 5 0; ! #X connect 1 1 2 1; ! #X connect 2 0 8 0; ! #X connect 3 0 4 0; ! #X connect 3 1 8 2; ! #X connect 4 0 2 0; ! #X connect 4 1 8 1; ! #X connect 5 0 3 1; ! #X connect 8 0 9 0; ! #X connect 9 0 10 0; ! #X connect 9 1 11 0; ! #X connect 9 2 12 0; ! #X connect 10 0 6 0; ! #X connect 11 0 6 0; ! #X connect 12 0 6 0; ! #X connect 12 1 7 0; ! #X restore 10 205 pd make lists; ! #X obj 288 143 spigot; ! #X obj 319 121 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0 ! 1; ! #X obj 125 160 print comport; ! #X obj 11 136 comport \$1 115200; ! #X obj 288 166 print command; ! #X connect 3 0 6 0; ! #X connect 6 0 12 0; ! #X connect 6 0 15 0; ! #X connect 8 0 15 0; ! #X connect 11 0 4 0; ! #X connect 12 0 16 0; ! #X connect 13 0 12 1; ! #X connect 15 0 5 0; ! #X connect 15 0 11 0; ! #X connect 15 1 14 0; --- 316,390 ---- #X connect 18 0 4 0; #X connect 19 0 4 0; ! #X restore 143 114 pd digital messages; ! #N canvas 134 58 331 263 analog 0; ! #X obj 65 6 inlet; ! #X obj 65 203 outlet; ! #X msg 65 180 analog \$1 \$2; ! #X obj 65 159 pack float float; ! #X obj 65 42 unpack float float float; ! #X obj 158 88 +; ! #X obj 158 113 / 1023; ! #X text 203 114 scale to 0-1; ! #X obj 206 63 << 7; ! #X obj 65 63 & 15; ! #X connect 0 0 4 0; ! #X connect 2 0 1 0; ! #X connect 3 0 2 0; ! #X connect 4 0 9 0; ! #X connect 4 1 5 0; ! #X connect 4 2 8 0; ! #X connect 5 0 6 0; ! #X connect 6 0 3 1; ! #X connect 8 0 5 1; ! #X connect 9 0 3 0; ! #X restore 286 113 pd analog messages; ! #X obj 85 13 inlet; ! #X msg 40 114 version \$2 \$1; ! #X obj 85 65 route 249 144; ! #X text 114 50 0xF9 0x90; ! #X connect 2 0 0 0; ! #X connect 3 0 0 0; ! #X connect 4 0 6 0; ! #X connect 5 0 0 0; ! #X connect 6 0 5 0; ! #X connect 6 1 2 0; ! #X connect 6 2 3 0; ! #X restore 184 294 pd convert to symbolic commands; ! #X connect 0 0 2 0; ! #X connect 2 0 9 0; #X connect 2 1 3 0; ! #X connect 3 0 9 0; ! #X connect 3 1 4 0; ! #X connect 4 0 7 1; ! #X connect 5 0 11 0; ! #X connect 6 0 5 1; ! #X connect 7 0 8 0; ! #X connect 7 0 6 0; ! #X connect 8 0 7 1; ! #X connect 9 0 7 0; ! #X connect 9 1 5 0; ! #X connect 11 0 1 0; ! #X restore 62 199 pd make lists; ! #N canvas 0 22 454 304 check 0; ! #X obj 47 62 inlet; ! #X obj 47 88 route version; ! #X obj 47 109 unpack float float; ! #X obj 92 153 print [arduino]_WARNING_INCOMPATIBLE_FIRMWARE_VERSION ! ; ! #X obj 47 131 select 1; #X connect 0 0 1 0; ! #X connect 1 0 2 0; ! #X connect 2 0 4 0; ! #X connect 4 1 3 0; ! #X restore 92 242 pd check version; ! #X text 10 337 (C) Copyright 2006 Free Software Foundation; ! #X connect 2 0 5 0; ! #X connect 5 0 9 0; ! #X connect 6 0 9 0; ! #X connect 9 0 4 0; ! #X connect 9 0 14 0; ! #X connect 9 1 12 0; ! #X connect 10 0 11 0; ! #X connect 12 0 5 0; ! #X connect 14 0 15 0; ! #X connect 14 0 3 0; Index: arduino-test.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/arduino-test.pd,v retrieving revision 1.7 retrieving revision 1.8 diff -C2 -d -r1.7 -r1.8 *** arduino-test.pd 31 Oct 2006 01:05:18 -0000 1.7 --- arduino-test.pd 22 Feb 2007 06:16:43 -0000 1.8 *************** *** 1,3 **** ! #N canvas 216 76 699 540 10; #X obj 512 7 import hardware mapping; #X obj 323 136 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577 --- 1,3 ---- ! #N canvas 216 76 703 544 10; #X obj 512 7 import hardware mapping; #X obj 323 136 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577 *************** *** 46,51 **** ; #X obj 138 119 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 ! -6 1 10 -225271 -1 -1 0 0; ! #X obj 277 332 tgl 15 1 empty empty empty 0 -6 0 8 -225271 -1 -1 1 1; #X text 454 156 how many analogIns to enable:; --- 46,51 ---- ; #X obj 138 119 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 ! -6 1 10 -225271 -1 -1 8800 0; ! #X obj 277 332 tgl 15 1 empty empty empty 0 -6 0 8 -225271 -1 -1 0 1; #X text 454 156 how many analogIns to enable:; *************** *** 153,157 **** #X msg 102 119 off; #X obj 80 91 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -176124 -1 ! -1 0; #X text 188 77 7; #X text 82 77 0; --- 153,157 ---- #X msg 102 119 off; #X obj 80 91 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -176124 -1 ! -1 11; #X text 188 77 7; #X text 82 77 0; *************** *** 168,172 **** #X text 260 77 12; #X text 97 77 1; ! #N canvas 66 58 415 495 pwm 0; #X obj 38 10 inlet; #X obj 131 10 inlet; --- 168,172 ---- #X text 260 77 12; #X text 97 77 1; ! #N canvas 66 58 419 499 pwm 0; #X obj 38 10 inlet; #X obj 131 10 inlet; *************** *** 209,213 **** #X connect 17 0 14 0; #X restore 81 145 pd pwm; ! #X msg 81 167 pwm 0 0; #X msg 328 195 info; #X msg 367 195 version; --- 209,213 ---- #X connect 17 0 14 0; #X restore 81 145 pd pwm; ! #X msg 81 167 pwm 11 0.590604; #X msg 328 195 info; #X msg 367 195 version; *************** *** 429,454 **** #N canvas 0 22 499 396 display 0; #X obj 6 7 inlet; ! #X obj 6 28 maxlib/speedlim 100; #X obj 6 50 outlet; #X obj 54 50 inlet; ! #X obj 54 71 maxlib/speedlim 100; #X obj 54 93 outlet; #X obj 103 93 inlet; ! #X obj 103 114 maxlib/speedlim 100; #X obj 103 136 outlet; #X obj 151 136 inlet; ! #X obj 151 157 maxlib/speedlim 100; #X obj 151 179 outlet; #X obj 200 179 inlet; ! #X obj 200 200 maxlib/speedlim 100; #X obj 200 222 outlet; #X obj 247 222 inlet; ! #X obj 247 243 maxlib/speedlim 100; #X obj 247 265 outlet; #X obj 295 265 inlet; ! #X obj 295 286 maxlib/speedlim 100; #X obj 295 308 outlet; #X obj 345 308 inlet; ! #X obj 345 329 maxlib/speedlim 100; #X obj 345 351 outlet; #X connect 0 0 1 0; --- 429,454 ---- #N canvas 0 22 499 396 display 0; #X obj 6 7 inlet; ! #X obj 6 28 mapping/resample 100; #X obj 6 50 outlet; #X obj 54 50 inlet; ! #X obj 54 71 mapping/resample 100; #X obj 54 93 outlet; #X obj 103 93 inlet; ! #X obj 103 114 mapping/resample 100; #X obj 103 136 outlet; #X obj 151 136 inlet; ! #X obj 151 157 mapping/resample 100; #X obj 151 179 outlet; #X obj 200 179 inlet; ! #X obj 200 200 mapping/resample 100; #X obj 200 222 outlet; #X obj 247 222 inlet; ! #X obj 247 243 mapping/resample 100; #X obj 247 265 outlet; #X obj 295 265 inlet; ! #X obj 295 286 mapping/resample 100; #X obj 295 308 outlet; #X obj 345 308 inlet; ! #X obj 345 329 mapping/resample 100; #X obj 345 351 outlet; #X connect 0 0 1 0; *************** *** 486,492 **** #X obj 613 468 tgl 15 0 empty empty 12 0 23 1 12 -232448 -1 -1 0 1 ; ! #X obj 631 468 tgl 15 0 empty empty 13 0 23 1 12 -232448 -1 -1 1 1 ; #X obj 397 468 tgl 15 0 empty empty 0 4 23 1 12 -232448 -1 -1 0 1; #X connect 4 0 71 0; #X connect 5 0 4 0; --- 486,500 ---- #X obj 613 468 tgl 15 0 empty empty 12 0 23 1 12 -232448 -1 -1 0 1 ; ! #X obj 631 468 tgl 15 0 empty empty 13 0 23 1 12 -232448 -1 -1 0 1 ; #X obj 397 468 tgl 15 0 empty empty 0 4 23 1 12 -232448 -1 -1 0 1; + #N canvas 0 22 454 304 raw 0; + #X obj 96 231 outlet; + #X obj 96 63 hsl 128 15 0 127 0 0 empty empty empty -2 -6 0 10 -262144 + -1 -1 2500 1; + #X msg 90 139 171 \, \$1 \, 0; + #X connect 1 0 2 0; + #X connect 2 0 0 0; + #X restore 374 292 pd raw PWM; #X connect 4 0 71 0; #X connect 5 0 4 0; *************** *** 561,562 **** --- 569,571 ---- #X connect 78 12 90 0; #X connect 78 13 91 0; + #X connect 93 0 71 1;

1 0

← Newer
1
2
3
4
5
6
7
...
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Pd-cvs February 2007