Pd-cvs March 2006

pd-cvs@lists.iem.at

16 participants
280 discussions

[PD-cvs] externals/hardware/arduino/examples PD_all_inputs.pd, NONE, 1.1 PD_two_potentiometers.pd, NONE, 1.1 PD_inputs_to_PD.pd, 1.1, 1.2 PD_send_potentiometer.pd, 1.1, 1.2
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv20865 Modified Files: PD_inputs_to_PD.pd PD_send_potentiometer.pd Added Files: PD_all_inputs.pd PD_two_potentiometers.pd Log Message: some example patches for the existing puredata firmwares, and the start of firmware for getting all inputs into Pd as fast as possible. Some clean-up needed before a real release Index: PD_inputs_to_PD.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_inputs_to_PD.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** PD_inputs_to_PD.pd 4 Mar 2006 22:21:55 -0000 1.1 --- PD_inputs_to_PD.pd 5 Mar 2006 06:48:01 -0000 1.2 *************** *** 1,3 **** ! #N canvas 583 37 658 481 10; #X obj 29 56 r pushButton2; #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 --- 1,3 ---- ! #N canvas 583 37 662 485 10; #X obj 29 56 r pushButton2; #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 *************** *** 27,31 **** -3754 -1 -1 0 256; #X obj 369 109 r potentioMeter2; - #X msg 246 316 devicename /dev/tty.usbserial-181; #X text 242 298 On Mac OS X \, set this to the right value:; #X msg 192 255 open \$1; --- 27,30 ---- *************** *** 66,69 **** --- 65,69 ---- #X restore 192 232 pd serin; #X text 273 233 serial port #; + #X msg 246 316 devicename /dev/tty.usbserial-191; #X connect 0 0 1 0; #X connect 2 0 3 0; *************** *** 75,83 **** #X connect 15 0 14 0; #X connect 17 0 16 0; ! #X connect 18 0 21 0; ! #X connect 20 0 21 0; ! #X connect 21 0 29 0; ! #X connect 28 0 21 0; ! #X connect 29 0 32 0; ! #X connect 29 1 31 0; ! #X connect 34 0 20 0; --- 75,83 ---- #X connect 15 0 14 0; #X connect 17 0 16 0; ! #X connect 19 0 20 0; ! #X connect 20 0 28 0; ! #X connect 27 0 20 0; ! #X connect 28 0 31 0; ! #X connect 28 1 30 0; ! #X connect 33 0 19 0; ! #X connect 35 0 20 0; --- NEW FILE: PD_all_inputs.pd --- #N canvas 159 48 492 617 10; #X obj 346 18 import zexy; #X text 112 148 On Mac OS X \, set this to the right value:; #X text 5 38 You might need to select another port \, check the Pd window to see if it connected successfully:; #X msg 136 120 close; #X msg 116 165 devicename /dev/tty.usbserial-191; #X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10 -3754 -1 -1 508 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; #X obj 241 251 s \$0-number-canvas; #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; #X obj 101 134 + 1; #X obj 100 173 outlet; #X obj 101 39 inlet; #X msg 241 228 label \$1; #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; #X connect 3 0 7 0; #X connect 5 0 2 0; #X connect 6 0 1 0; #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; #X restore 77 71 pd serin; #X msg 77 119 open \$1; #X text 4 -3 This patch works with the example Arduino firmware of the same name.; #X text 9 552 CAUTION! Watch out if you connect your potentiometer without an extra resistor \, when you turn it all the way up \, the full voltage and current will go to the input. This could fry your board!; #X obj 79 357 +; #X obj 78 259 trigger float bang; #X obj 95 318 float; #X obj 95 337 * 10; #X obj 176 345 float; #X msg 196 290 0; #X text 250 459 ASCII for A B C D E F; #X obj 77 235 - 48; #X obj 79 460 route 65 66 67 68 69 70; #X obj 79 378 trigger bang float; #X obj 79 417 float; #X obj 247 386 float; #X obj 79 440 pack float float; #X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10 -3754 -1 -1 0 256; #X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10 -3754 -1 -1 10 256; #X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10 -3754 -1 -1 98 256; #X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10 -3754 -1 -1 158 256; #X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10 -3754 -1 -1 623 256; #X obj 320 511 print ERRANT_VALUE; #X obj 247 250 float; #X obj 77 211 moses 58; #X text 84 88 (sometimes it takes up to 10 seconds to close the serial port \, if things are running fast); #X text 181 121 <-- close before uploading a new firmware!; #X obj 77 188 comport 1 19200; #X connect 3 0 33 0; #X connect 4 0 33 0; #X connect 6 0 7 0; #X connect 7 0 33 0; #X connect 10 0 14 0; #X connect 10 0 19 0; #X connect 11 0 10 0; #X connect 11 1 12 0; #X connect 12 0 13 0; #X connect 13 0 10 1; #X connect 14 0 12 1; #X connect 15 0 12 1; #X connect 17 0 11 0; #X connect 18 0 5 0; #X connect 18 1 23 0; #X connect 18 2 24 0; #X connect 18 3 25 0; #X connect 18 4 26 0; #X connect 18 5 27 0; #X connect 18 6 28 0; #X connect 19 0 20 0; #X connect 19 1 22 1; #X connect 20 0 22 0; #X connect 21 0 20 1; #X connect 22 0 18 0; #X connect 29 0 15 0; #X connect 29 0 21 0; #X connect 30 0 17 0; #X connect 30 1 29 0; #X connect 33 0 30 0; Index: PD_send_potentiometer.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_send_potentiometer.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** PD_send_potentiometer.pd 4 Mar 2006 22:21:55 -0000 1.1 --- PD_send_potentiometer.pd 5 Mar 2006 06:48:01 -0000 1.2 *************** *** 1,15 **** ! #N canvas 66 362 494 354 10; ! #X text 153 122 On Mac OS X \, set this to the right value:; ! #X obj 103 182 comport 1 9600; ! #X text 30 11 You might need to select another port \, check the Pd window to see if it connected successfully:; ! #X msg 163 87 close; ! #X msg 157 139 devicename /dev/tty.usbserial-191; ! #X obj 102 215 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 79 256; ! #X text 36 252 CAUTION! Watch out if you connect your potentiometer ! without an extra resistor \, when you turn it all the way up \, the ! full voltage and currrent will go to the input. This could kill your ! board!; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 --- 1,11 ---- ! #N canvas 66 362 498 358 10; ! #X text 151 136 On Mac OS X \, set this to the right value:; ! #X obj 101 196 comport 1 9600; ! #X text 28 25 You might need to select another port \, check the Pd window to see if it connected successfully:; ! #X msg 161 101 close; ! #X msg 155 153 devicename /dev/tty.usbserial-191; ! #X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 13 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 *************** *** 30,41 **** #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; ! #X restore 103 61 pd serin; ! #X msg 103 86 open \$1; ! #X text 184 62 serial port #; ! #X text 30 -20 This patch works with the example Arduino firmware of the same name.; #X connect 1 0 5 0; #X connect 3 0 1 0; #X connect 4 0 1 0; ! #X connect 7 0 8 0; ! #X connect 8 0 1 0; --- 26,41 ---- #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; ! #X restore 101 75 pd serin; ! #X msg 101 100 open \$1; ! #X text 182 76 serial port #; ! #X text 28 -6 This patch works with the example Arduino firmware of the same name.; + #X text 34 266 CAUTION! Watch out if you connect your potentiometer + without an extra resistor \, when you turn it all the way up \, the + full voltage and current will go to the input. This could kill your + board!; #X connect 1 0 5 0; #X connect 3 0 1 0; #X connect 4 0 1 0; ! #X connect 6 0 7 0; ! #X connect 7 0 1 0; --- NEW FILE: PD_two_potentiometers.pd --- #N canvas 327 35 530 629 10; #X obj 420 2 import zexy; #X text 127 139 On Mac OS X \, set this to the right value:; #X obj 77 195 comport 1 9600; #X text 5 42 You might need to select another port \, check the Pd window to see if it connected successfully:; #X msg 137 104 close; #X msg 131 156 devicename /dev/tty.usbserial-191; #X obj 111 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15 30 1 14 -3754 -1 -1 0 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; #X obj 241 251 s \$0-number-canvas; #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; #X obj 101 134 + 1; #X obj 100 173 outlet; #X obj 101 39 inlet; #X msg 241 228 label \$1; #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; #X connect 3 0 7 0; #X connect 5 0 2 0; #X connect 6 0 1 0; #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; #X restore 77 78 pd serin; #X msg 77 103 open \$1; #X text 158 79 serial port #; #X text 4 -3 This patch works with the example Arduino firmware of the same name.; #X text 6 550 CAUTION! Watch out if you connect your potentiometer without an extra resistor \, when you turn it all the way up \, the full voltage and current will go to the input. This could fry your board!; #X obj 156 246 makefilename %c; #X obj 77 225 select 13 10; #X text 266 246 <-- convert integer to ASCII; #X obj 223 424 +; #X obj 193 470 float; #X obj 221 315 trigger float bang; #X obj 239 385 float; #X obj 239 404 * 10; #X obj 221 289 symbol2list; #X obj 320 412 float; #X msg 164 337 0; #X obj 150 470 float; #X text 197 339 <-- reset for the next pot reading; #X text 303 285 <-- converts the ASCII digit; #X text 332 297 symbol to a float; #X text 169 225 <-- filter out newline characters; #X obj 156 267 select B A; #X obj 209 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15 30 1 14 -3754 -1 -1 0 256; #X connect 2 0 13 0; #X connect 4 0 2 0; #X connect 5 0 2 0; #X connect 7 0 8 0; #X connect 8 0 2 0; #X connect 12 0 28 0; #X connect 13 2 12 0; #X connect 15 0 16 1; #X connect 15 0 21 0; #X connect 15 0 23 1; #X connect 16 0 29 0; #X connect 17 0 15 0; #X connect 17 1 18 0; #X connect 18 0 19 0; #X connect 19 0 15 1; #X connect 20 0 17 0; #X connect 21 0 18 1; #X connect 22 0 18 1; #X connect 23 0 6 0; #X connect 28 0 22 0; #X connect 28 0 23 0; #X connect 28 1 22 0; #X connect 28 1 16 0; #X connect 28 2 20 0;

1 0

externals/hardware/arduino/examples/Pd_Input - New directory
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples/Pd_Input In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv19693/Pd_Input Log Message: Directory /cvsroot/pure-data/externals/hardware/arduino/examples/Pd_Input added to the repository

1 0

doc/pddp netreceive-help.pd,1.1,1.2
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/pddp In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv13785 Modified Files: netreceive-help.pd Log Message: added note about third argument 'old' Index: netreceive-help.pd =================================================================== RCS file: /cvsroot/pure-data/doc/pddp/netreceive-help.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** netreceive-help.pd 27 May 2004 16:53:47 -0000 1.1 --- netreceive-help.pd 5 Mar 2006 03:53:21 -0000 1.2 *************** *** 1,13 **** ! #N canvas 147 52 764 593 10; ! #X obj 94 453 netreceive 4567 0 old; ! #X obj 76 453 tgl 17 0 empty empty empty 0 -6 0 8 -4033 -1 -1 0 1; ! #X text 10 415 sends everything it receives into the global message ! space; ! #X text 12 508 You can send and receive messages to Pd from the command line using 'pdsend' and 'pdreceive'.; ! #X obj 4 -3 cnv 15 750 20 empty empty netreceive 20 10 1 18 -233017 -66577 0; ! #X obj 719 -1 pddp; ! #X obj 612 537 help-netreceive; ! #X text 467 537 Miller's help patch:; ! #X connect 0 0 1 0; --- 1,40 ---- ! #N canvas 300 97 467 585 10; ! #X text 3 531 You can send and receive messages to Pd from the command line using 'pdsend' and 'pdreceive'.; ! #X obj 4 1 cnv 15 450 20 empty empty netreceive 20 10 1 18 -233017 -66577 0; ! #X obj 79 313 netreceive 3000; ! #X floatatom 179 334 0 0 0 0 - - -; ! #X obj 79 387 netreceive 3001 1; ! #X text 12 46 The Netreceive object opens a socket for TCP ("stream") ! or UDP ("datagram") network reception on a specified port. If using ! TCP \, an outlet gives you the number of Netsend objects (or other ! compatible clients) have opened connections here.; ! #X text 10 127 Incoming network messages appear on "receive" objects ! \; it's up to the sender to select which one. Here \, a "receive foo" ! fields messages sent from the Netsend help window \, q.v.; ! #X text 34 270 first argument: portnumber = 3000; ! #X text 34 286 second argument: 0 or none for TCP \, nonzero for UDP ! ; ! #X text 217 312 <-- TCP \, port 3000; ! #X text 241 386 <-- UDP \, port 3001; ! #X text 213 335 <--- number of open connections; ! #X text 5 366 incoming messages; ! #X obj 79 334 print tcp; ! #X obj 79 408 print udp; ! #X text 11 178 There are some possibilities for intercommunication ! with other programs... see the help for "netsend."; ! #X text 19 26 [netreceive] -- listen for incoming messages from network ! ; ! #X text 9 216 SECURITY ALERT: the port that netreceive opens has no ! access restrictions \, so anyone can connect to it and send messages. ! Be careful that; ! #X text 109 509 [netreceive 4567 0 old]; ! #X text 7 431 If you set the third argument to the word "old" \, everything ! sent to the specified port is received into the global message space. ! This is the original behavior of [netreceive]. This can be VERY INSECURE ! since it gives someone full access to your computer \, allowing them ! to do anything that Pd can via the network.; ! #X connect 2 0 13 0; ! #X connect 2 1 3 0; ! #X connect 4 0 14 0;

1 0

doc/pddp/about reverb-about.pd,NONE,1.1
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/pddp/about In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv12685/about Added Files: reverb-about.pd Log Message: added a sketch pad patch for an all_about_reverb. Right now, its just a place to collect notes and ideas --- NEW FILE: reverb-about.pd --- #N canvas 0 22 454 304 10; #X obj 101 233 freeverb~; #X obj 109 92 rev1~; #X obj 105 124 rev2~; #X obj 104 157 rev3~;

1 0

doc/pddp/about pddp-about.pd,NONE,1.1
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/pddp/about In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv11878/about Added Files: pddp-about.pd Log Message: removed pddp.pd because it causes nasty bugs and is useless. it was renamed to pddp-about.pd to comply with new naming scheme --- NEW FILE: pddp-about.pd --- #N canvas 298 124 492 628 10; #X text 25 119 The PDDP was proposed initially in early 2002 by Krzysztof Czaja who suggested that Pure Data was in need of comprehensive documentation. ; #X text 45 231 - Michal Seta; #X text 45 204 - Miller Puckette; #X text 45 217 - Dave Sabine; #X text 14 374 THINGS TO NOTE:; #X text 25 480 Externals and other Libraries: Each PDDP document includes mention of "related objects from other Pd libraries" as well as mention of "related native Pd objects". The objects from other libraries are available only if you download those libraries from their respective authors and integrate them properly into your version of Pd. We do not and cannot maintain a complete list of externals - but we try. For more info about externals and other objects \, see http://www.puredata.org/ and the Pure Data Base at http://iem.kug.ac.at/pdb/; #X text 45 245 - Hans-Christoph Steiner; #X text 25 315 All comments \, corrections \, etc. regarding the PDDP reference files should be directed to the Pd Developers' list: pd-dev(a)iem.at ; #X text 26 265 PDDP is now part of the CVS Pd distributions. It was originally available at Dave's web site: http://www.davesabine.com/media/puredata.asp ; #X obj 3 2 cnv 15 450 20 empty empty PDDP 2 12 1 18 -233017 -66577 0; #X text 102 5 Pure Data Documentation Project; #X obj 25 38 pddp_open table_of_contents; #X text 25 392 Authors: If you would like to participate in this project \, simply gather together information about objects \, tutorials \, examples \, etc. and email pd-dev(a)iem.at for info about formatting your documents. All documents should be committed to the CVS so that they will be included in future releases.; #X text 25 168 The project was originally managed by Dave Sabine. The people involved in this project include (alphabetically):; #X obj 25 67 pddp_open glossary;

1 0

doc/pddp pddp.pd,1.7,NONE
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/pddp In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv11421 Removed Files: pddp.pd Log Message: removed pddp.pd because it causes nasty bugs and is useless. it was renamed to pddp-about.pd to comply with new naming scheme --- pddp.pd DELETED ---

1 0

doc/pddp makefilename-help.pd,1.7,1.8
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/pddp In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv10046 Modified Files: makefilename-help.pd Log Message: make number boxes show integers rather than floats in ASCII and HEX examples Index: makefilename-help.pd =================================================================== RCS file: /cvsroot/pure-data/doc/pddp/makefilename-help.pd,v retrieving revision 1.7 retrieving revision 1.8 diff -C2 -d -r1.7 -r1.8 *** makefilename-help.pd 24 Jan 2006 18:54:34 -0000 1.7 --- makefilename-help.pd 5 Mar 2006 03:47:47 -0000 1.8 *************** *** 1,3 **** ! #N canvas 173 51 577 571 10; #X obj 104 539 pddp; #X obj 8 8 cnv 15 90 553 empty empty empty 20 12 0 14 -233017 -66577 --- 1,3 ---- ! #N canvas 173 51 581 575 10; #X obj 104 539 pddp; #X obj 8 8 cnv 15 90 553 empty empty empty 20 12 0 14 -233017 -66577 *************** *** 5,9 **** #X text 104 483 Pd Documentation Chapter 3.6 - doc/1.manual/x3.htm ; ! #N canvas 135 30 512 640 More_Info 0; #X text 17 4 COMMON USES; #X text 15 577 INNOVATIVE USES; --- 5,9 ---- #X text 104 483 Pd Documentation Chapter 3.6 - doc/1.manual/x3.htm ; ! #N canvas 135 30 516 644 More_Info 0; #X text 17 4 COMMON USES; #X text 15 577 INNOVATIVE USES; *************** *** 179,184 **** #X symbolatom 86 345 0 0 0 0 - - -; #X obj 90 296 hsl 150 18 0 122 0 1 empty empty ASCII_range 2 9 1 12 ! -262131 -1 -1 0 0; ! #X floatatom 45 347 5 0 0 0 - - -; #X text 45 488 - only one printf pattern can be used at once; #X text 45 445 - This object does not provide advanced formatting and --- 179,184 ---- #X symbolatom 86 345 0 0 0 0 - - -; #X obj 90 296 hsl 150 18 0 122 0 1 empty empty ASCII_range 2 9 1 12 ! -262131 -1 -1 7400 0; ! #X floatatom 45 347 3 0 0 0 - - -; #X text 45 488 - only one printf pattern can be used at once; #X text 45 445 - This object does not provide advanced formatting and *************** *** 192,196 **** -1 -1 6000 0; #X obj 299 325 makefilename hex=%X; ! #X floatatom 258 347 5 0 0 0 - - -; #X obj 86 325 makefilename ASCII=%c; #X text 44 378 Watch out! ASCII characters 123 and 125 (curly braces) --- 192,196 ---- -1 -1 6000 0; #X obj 299 325 makefilename hex=%X; ! #X floatatom 258 347 3 0 0 0 - - -; #X obj 86 325 makefilename ASCII=%c; #X text 44 378 Watch out! ASCII characters 123 and 125 (curly braces)

1 0

doc/additional/messageoddness inconsistent_numeric_symbols.pd, NONE, 1.1
by Hans-Christoph Steiner 05 Mar '06

05 Mar '06

Update of /cvsroot/pure-data/doc/additional/messageoddness In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv13679 Added Files: inconsistent_numeric_symbols.pd Log Message: made clear example of inconsistent numeric symbols that I discovered while trying to process ASCII values coming from [comport] as floats --- NEW FILE: inconsistent_numeric_symbols.pd --- #N canvas 279 119 474 393 10; #X obj 82 96 makefilename %c; #X msg 81 75 55; #X floatatom 142 303 5 0 0 0 - - -; #X symbolatom 190 302 10 0 0 0 - - -; #X obj 95 323 bng 15 250 50 0 empty empty bang -6 23 1 12 -262144 -1 -1; #X obj 95 279 route bang float symbol list; #X obj 142 323 bng 15 250 50 0 empty empty float -4 23 1 12 -262144 -1 -1; #X obj 190 323 bng 15 250 50 0 empty empty symbol -12 23 1 12 -262144 -1 -1; #X obj 238 323 bng 15 250 50 0 empty empty list -2 23 1 12 -262144 -1 -1; #X obj 286 323 bng 15 250 50 0 empty empty undefined -18 23 1 12 -262144 -1 -1; #X text 195 93 makes a symbol of the ascii char '7'; #X msg 108 136 symbol 7; #X msg 132 222 7; #X obj 132 243 symbol; #X text 184 243 makes a symbol of the word 'float'; #X obj 31 279 print; #X obj 124 176 symbol 7; #X msg 123 157 bang; #X text 197 157 these both make a blank symbol; #X text 11 11 All of these create a symbol \, but they create totally different symbols. It seems that only [makefilename] does the correct thing.; #X connect 0 0 5 0; #X connect 0 0 15 0; #X connect 1 0 0 0; #X connect 2 0 6 0; #X connect 3 0 7 0; #X connect 5 0 4 0; #X connect 5 1 2 0; #X connect 5 2 3 0; #X connect 5 3 8 0; #X connect 5 4 9 0; #X connect 11 0 5 0; #X connect 11 0 15 0; #X connect 12 0 13 0; #X connect 13 0 5 0; #X connect 13 0 15 0; #X connect 16 0 5 0; #X connect 16 0 15 0; #X connect 17 0 16 0;

1 0

externals/hardware/arduino/examples PD_inputs_to_PD.pd, NONE, 1.1 PD_send_potentiometer.pd, NONE, 1.1
by Hans-Christoph Steiner 04 Mar '06

04 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv30499 Added Files: PD_inputs_to_PD.pd PD_send_potentiometer.pd Log Message: PD_send_potentiometer.pd now works with the arduino firmware of the same name; PD_inputs_to_PD.pd still needs some work --- NEW FILE: PD_inputs_to_PD.pd --- #N canvas 583 37 658 481 10; #X obj 29 56 r pushButton2; #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 129 56 r pushButton3; #X obj 129 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 229 56 r pushButton4; #X obj 229 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 329 56 r pushButton5; #X obj 329 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 429 56 r pushButton6; #X obj 429 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 529 56 r pushButton7; #X obj 529 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; #X obj 127 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; #X obj 127 109 r potentioMeter0; #X obj 248 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; #X obj 248 109 r potentioMeter1; #X obj 369 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; #X obj 369 109 r potentioMeter2; #X msg 246 316 devicename /dev/tty.usbserial-181; #X text 242 298 On Mac OS X \, set this to the right value:; #X msg 192 255 open \$1; #X obj 192 358 comport 1 9600; #X text 107 186 You might need to select another port \, check the Pd window to see if it connected successfully:; #X obj 193 421 moses; #X obj 724 500; #X msg 823 360; #X obj 838 358; #X msg 820 377; #X msg 252 255 close; #X obj 192 392 select 10; #X text 263 392 select new line; #X obj 262 426 print; #X obj 165 423 bng 15 250 50 0 empty empty empty 0 -6 0 8 -262144 -1 -1; #X text 16 13 This patch works with the example Arduino firmware of the same name.; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; #X obj 241 251 s \$0-number-canvas; #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; #X obj 101 134 + 1; #X obj 100 173 outlet; #X obj 101 39 inlet; #X msg 241 228 label \$1; #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; #X connect 3 0 7 0; #X connect 5 0 2 0; #X connect 6 0 1 0; #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; #X restore 192 232 pd serin; #X text 273 233 serial port #; #X connect 0 0 1 0; #X connect 2 0 3 0; #X connect 4 0 5 0; #X connect 6 0 7 0; #X connect 8 0 9 0; #X connect 10 0 11 0; #X connect 13 0 12 0; #X connect 15 0 14 0; #X connect 17 0 16 0; #X connect 18 0 21 0; #X connect 20 0 21 0; #X connect 21 0 29 0; #X connect 28 0 21 0; #X connect 29 0 32 0; #X connect 29 1 31 0; #X connect 34 0 20 0; --- NEW FILE: PD_send_potentiometer.pd --- #N canvas 66 362 494 354 10; #X text 153 122 On Mac OS X \, set this to the right value:; #X obj 103 182 comport 1 9600; #X text 30 11 You might need to select another port \, check the Pd window to see if it connected successfully:; #X msg 163 87 close; #X msg 157 139 devicename /dev/tty.usbserial-191; #X obj 102 215 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 79 256; #X text 36 252 CAUTION! Watch out if you connect your potentiometer without an extra resistor \, when you turn it all the way up \, the full voltage and currrent will go to the input. This could kill your board!; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; #X obj 241 251 s \$0-number-canvas; #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; #X obj 101 134 + 1; #X obj 100 173 outlet; #X obj 101 39 inlet; #X msg 241 228 label \$1; #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; #X connect 3 0 7 0; #X connect 5 0 2 0; #X connect 6 0 1 0; #X connect 7 0 6 0; #X coords 0 -1 1 1 76 17 1 100 100; #X restore 103 61 pd serin; #X msg 103 86 open \$1; #X text 184 62 serial port #; #X text 30 -20 This patch works with the example Arduino firmware of the same name.; #X connect 1 0 5 0; #X connect 3 0 1 0; #X connect 4 0 1 0; #X connect 7 0 8 0; #X connect 8 0 1 0;

1 0

pd/src s_audio.c,1.5.4.16.2.5,1.5.4.16.2.6
by Tim Blechmann 02 Mar '06

02 Mar '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv9068 Modified Files: Tag: devel_0_39 s_audio.c Log Message: current operating systems won't be able to sleep less than 1 ms Index: s_audio.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/s_audio.c,v retrieving revision 1.5.4.16.2.5 retrieving revision 1.5.4.16.2.6 diff -C2 -d -r1.5.4.16.2.5 -r1.5.4.16.2.6 *** s_audio.c 16 Dec 2005 21:22:19 -0000 1.5.4.16.2.5 --- s_audio.c 2 Mar 2006 12:55:28 -0000 1.5.4.16.2.6 *************** *** 1233,1242 **** void sys_update_sleepgrain(void) { ! sys_sleepgrain = sys_schedadvance/4; ! if (sys_sleepgrain < 100) ! sys_sleepgrain = 100; else ! if (sys_sleepgrain > 5000) ! sys_sleepgrain = 5000; } --- 1233,1242 ---- void sys_update_sleepgrain(void) { ! sys_sleepgrain = sys_schedadvance/4; ! if (sys_sleepgrain < 1000) ! sys_sleepgrain = 1000; else ! if (sys_sleepgrain > 5000) ! sys_sleepgrain = 5000; }

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Pd-cvs March 2006