Pd-cvs March 2006

pd-cvs@lists.iem.at

16 participants
280 discussions

externals/hardware/arduino/examples/Pd_Input Pd_Input.pde, 1.1, 1.2
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples/Pd_Input In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv27679/Pd_Input Modified Files: Pd_Input.pde Log Message: got the firmware for the high-speed protocol sketched out, now I need to figure out the div/mod byte format Index: Pd_Input.pde =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/Pd_Input/Pd_Input.pde,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** Pd_Input.pde 5 Mar 2006 06:48:01 -0000 1.1 --- Pd_Input.pde 11 Mar 2006 04:35:36 -0000 1.2 *************** *** 2,14 **** * ------------------ * ! * This program reads all of the Analog inputs ! * and sends the data to the computer as fast as ! * possible. It was designed to work with the Pd ! * patch of the same name in: ! * Help -> Browser -> examples -> hardware * * (cleft) 2006 Hans-Christoph Steiner * @author: Hans-Christoph Steiner ! * @date: 2006-03-04 * @location: Polytechnic University, Brooklyn, New York, USA */ --- 2,17 ---- * ------------------ * ! * This program reads all of the Analog and 12 Digital Inputs ! * and sends the data to the computer as fast as possible. ! * It reads one analog pin and two digital pins per cycle ! * so that the time between reads on all pins remains ! * constant. ! * ! * It was designed to work with the Pd patch of the same ! * name in: Help -> Browser -> examples -> hardware * * (cleft) 2006 Hans-Christoph Steiner * @author: Hans-Christoph Steiner ! * @date: 2006-03-10 * @location: Polytechnic University, Brooklyn, New York, USA */ *************** *** 20,33 **** */ ! int potPin = 0; void setup() { ! beginSerial(19200); } void loop() { ! printByte(potPin + 65); // add 65 to get ASCII chars starting with A ! printInteger(analogRead(potPin)); ! potPin = potPin + 1; ! if (potPin > 5) ! potPin = 0; } --- 23,64 ---- */ ! int analogPin = 0; ! int digitalPin = 0; ! int ledOut = 1; ! int analogIn = 0; void setup() { ! beginSerial(9600); } void loop() { ! /* ! * get two digital ins ! */ ! /* ! printByte(digitalRead(digitalPin)); ! digitalPin = digitalPin + 1; ! if (digitalPin > 11) ! digitalPin = 0; ! printByte(digitalRead(digitalPin)); ! digitalPin = digitalPin + 1; ! if (digitalPin > 11) ! digitalPin = 0; ! */ ! /* ! * get analog in ! */ ! printByte(65); ! analogIn = analogRead(analogPin); ! printByte(analogIn / 127); ! printByte(analogIn % 127); ! analogPin = analogPin + 1; ! if (analogPin > 5) ! { ! analogPin = 0; ! // toggle the status LED (pin 13) ! digitalWrite(13,ledOut); ! ledOut = !ledOut; // alternate the LED ! // the newline (ASCII 10) marks the start/end of the sequence ! printNewline(); ! } }

1 0

externals/hardware/arduino/examples PD_all_inputs.pd, 1.1, 1.2
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv27679 Modified Files: PD_all_inputs.pd Log Message: got the firmware for the high-speed protocol sketched out, now I need to figure out the div/mod byte format Index: PD_all_inputs.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_all_inputs.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** PD_all_inputs.pd 5 Mar 2006 06:48:01 -0000 1.1 --- PD_all_inputs.pd 11 Mar 2006 04:35:36 -0000 1.2 *************** *** 1,22 **** ! #N canvas 159 48 492 617 10; ! #X obj 346 18 import zexy; ! #X text 112 148 On Mac OS X \, set this to the right value:; ! #X text 5 38 You might need to select another port \, check the Pd window to see if it connected successfully:; ! #X msg 136 120 close; ! #X msg 116 165 devicename /dev/tty.usbserial-191; ! #X obj 11 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC0 5 30 1 10 ! -3754 -1 -1 508 256; ! #N canvas 162 133 518 368 serin 0; ! #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; ! #X obj 241 251 s \$0-number-canvas; ! #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; ! #X obj 101 134 + 1; ! #X obj 100 173 outlet; ! #X obj 101 39 inlet; ! #X msg 241 228 label \$1; ! #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; --- 1,44 ---- ! #N canvas 970 165 635 705 10; ! #X obj 480 668 import zexy; ! #X obj 21 78 nbx 4 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 91 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 161 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 231 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 301 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 371 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -241291 -1 -1 0 256; ! #X obj 21 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; ! #X obj 122 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; ! #X obj 223 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; ! #X text 160 241 On Mac OS X \, set this to the right value:; ! #X msg 100 220 open \$1; ! #X obj 100 287 comport 1 9600; ! #X text 15 156 You might need to select another port \, check the Pd window to see if it connected successfully:; ! #X obj 724 492; ! #X msg 823 352; ! #X obj 838 350; ! #X msg 820 369; ! #X text 16 5 This patch works with the example Arduino firmware of ! the same name.; ! #N canvas 162 133 526 376 serin 0; ! #X obj 120 61 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; ! #X obj 200 225 s \$0-number-canvas; ! #X obj 60 61 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; ! #X obj 60 108 + 1; ! #X obj 59 147 outlet; ! #X obj 60 13 inlet; ! #X msg 200 202 label \$1; ! #X obj 200 180 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; *************** *** 25,95 **** #X connect 6 0 1 0; #X connect 7 0 6 0; ! #X coords 0 -1 1 1 76 17 1 100 100; ! #X restore 77 71 pd serin; ! #X msg 77 119 open \$1; ! #X text 4 -3 This patch works with the example Arduino firmware of ! the same name.; ! #X text 9 552 CAUTION! Watch out if you connect your potentiometer ! without an extra resistor \, when you turn it all the way up \, the ! full voltage and current will go to the input. This could fry your ! board!; ! #X obj 79 357 +; ! #X obj 78 259 trigger float bang; ! #X obj 95 318 float; ! #X obj 95 337 * 10; ! #X obj 176 345 float; ! #X msg 196 290 0; ! #X text 250 459 ASCII for A B C D E F; ! #X obj 77 235 - 48; ! #X obj 79 460 route 65 66 67 68 69 70; ! #X obj 79 378 trigger bang float; ! #X obj 79 417 float; ! #X obj 247 386 float; ! #X obj 79 440 pack float float; ! #X obj 61 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC1 5 30 1 10 -3754 -1 -1 0 256; ! #X obj 111 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC2 5 30 1 10 ! -3754 -1 -1 10 256; ! #X obj 161 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC3 5 30 1 10 ! -3754 -1 -1 98 256; ! #X obj 211 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC4 5 30 1 10 ! -3754 -1 -1 158 256; ! #X obj 261 508 nbx 4 20 -1e+37 1e+37 0 0 empty empty ADC5 5 30 1 10 ! -3754 -1 -1 623 256; ! #X obj 320 511 print ERRANT_VALUE; ! #X obj 247 250 float; ! #X obj 77 211 moses 58; ! #X text 84 88 (sometimes it takes up to 10 seconds to close the serial ! port \, if things are running fast); ! #X text 181 121 <-- close before uploading a new firmware!; ! #X obj 77 188 comport 1 19200; ! #X connect 3 0 33 0; ! #X connect 4 0 33 0; ! #X connect 6 0 7 0; ! #X connect 7 0 33 0; ! #X connect 10 0 14 0; ! #X connect 10 0 19 0; ! #X connect 11 0 10 0; ! #X connect 11 1 12 0; ! #X connect 12 0 13 0; ! #X connect 13 0 10 1; ! #X connect 14 0 12 1; ! #X connect 15 0 12 1; ! #X connect 17 0 11 0; ! #X connect 18 0 5 0; ! #X connect 18 1 23 0; ! #X connect 18 2 24 0; ! #X connect 18 3 25 0; ! #X connect 18 4 26 0; ! #X connect 18 5 27 0; ! #X connect 18 6 28 0; ! #X connect 19 0 20 0; ! #X connect 19 1 22 1; ! #X connect 20 0 22 0; ! #X connect 21 0 20 1; ! #X connect 22 0 18 0; ! #X connect 29 0 15 0; ! #X connect 29 0 21 0; ! #X connect 30 0 17 0; ! #X connect 30 1 29 0; ! #X connect 33 0 30 0; --- 47,158 ---- #X connect 6 0 1 0; #X connect 7 0 6 0; ! #X coords 0 -1 1 1 76 17 1 60 60; ! #X restore 100 197 pd serin; ! #X text 181 198 serial port #; ! #X obj 21 112 receive A; ! #X obj 122 112 receive B; ! #X obj 223 112 receive C; ! #X obj 91 58 receive E; ! #X obj 21 58 receive D; ! #X obj 161 58 receive F; ! #X obj 231 58 receive G; ! #X obj 301 58 receive H; ! #X obj 371 58 receive I; ! #X text 12 95 potentiometers:; ! #X text 10 39 pushbuttons; ! #X text 281 675 released under the GNU GPL; ! #X text 67 660 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> ! ; ! #X obj 324 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 425 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; ! #X obj 526 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; ! #X obj 324 112 receive D; ! #X obj 425 112 receive E; ! #X obj 526 112 receive F; ! #X obj 65 383 spigot; ! #X obj 105 361 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 ! 1; ! #X msg 160 220 close; ! #X obj 68 492 print --------------------; ! #X obj 67 434 select 10 65; ! #X obj 105 466 print A; ! #X obj 163 454 print; ! #X msg 164 259 devicename /dev/tty.usbserial-0B1; ! #N canvas 630 635 454 304 alternate 0; ! #X obj 87 8 inlet; ! #X obj 151 244 outlet; ! #X obj 319 247 outlet; ! #X obj 159 197 spigot; ! #X obj 319 191 spigot; ! #X obj 158 57 trigger anything bang; ! #X obj 196 152 abs; ! #X floatatom 212 198 5 0 0 0 - - -; ! #X obj 356 147 abs; ! #X msg 295 77 1; ! #X obj 196 173 float; ! #X obj 355 168 float; ! #X obj 86 34 route reset; ! #X msg 103 82 1; ! #X obj 356 128 -; ! #X msg 73 82 0; ! #X obj 196 133 -; ! #X obj 15 35 loadbang; ! #X obj 86 54 bang; ! #X connect 0 0 12 0; ! #X connect 3 0 1 0; ! #X connect 4 0 2 0; ! #X connect 5 0 3 0; ! #X connect 5 0 4 0; ! #X connect 5 1 9 0; ! #X connect 6 0 10 0; ! #X connect 8 0 11 0; ! #X connect 9 0 14 0; ! #X connect 9 0 16 0; ! #X connect 10 0 3 1; ! #X connect 10 0 7 0; ! #X connect 10 0 16 1; ! #X connect 11 0 4 1; ! #X connect 11 0 14 1; ! #X connect 12 0 18 0; ! #X connect 12 1 5 0; ! #X connect 13 0 14 1; ! #X connect 14 0 8 0; ! #X connect 15 0 16 1; ! #X connect 16 0 6 0; ! #X connect 17 0 13 0; ! #X connect 17 0 15 0; ! #X connect 18 0 13 0; ! #X connect 18 0 15 0; ! #X restore 286 465 pd alternate; ! #X msg 317 423 reset; ! #X obj 285 499 print HIGH; ! #X obj 365 498 print LOW; ! #X connect 11 0 12 0; ! #X connect 12 0 40 0; ! #X connect 19 0 11 0; ! #X connect 21 0 7 0; ! #X connect 22 0 8 0; ! #X connect 23 0 9 0; ! #X connect 24 0 2 0; ! #X connect 25 0 1 0; ! #X connect 26 0 3 0; ! #X connect 27 0 4 0; ! #X connect 28 0 5 0; ! #X connect 29 0 6 0; ! #X connect 37 0 34 0; ! #X connect 38 0 35 0; ! #X connect 39 0 36 0; ! #X connect 40 0 44 0; ! #X connect 41 0 40 1; ! #X connect 42 0 12 0; ! #X connect 44 0 43 0; ! #X connect 44 1 45 0; ! #X connect 44 2 46 0; ! #X connect 44 2 48 0; ! #X connect 47 0 12 0; ! #X connect 48 0 50 0; ! #X connect 48 1 51 0; ! #X connect 49 0 48 0;

1 0

abstractions/purepd alternate.pd,1.1,1.2
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/abstractions/purepd In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv24921/purepd Modified Files: alternate.pd Log Message: added reset message Index: alternate.pd =================================================================== RCS file: /cvsroot/pure-data/abstractions/purepd/alternate.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** alternate.pd 11 Mar 2006 04:20:36 -0000 1.1 --- alternate.pd 11 Mar 2006 04:30:43 -0000 1.2 *************** *** 1,30 **** ! #N canvas 581 288 454 304 10; ! #X obj 81 23 inlet; ! #X obj 72 256 outlet; ! #X obj 273 254 outlet; ! #X obj 80 209 spigot; ! #X obj 240 203 spigot; ! #X obj 79 69 trigger anything bang; ! #X obj 117 164 abs; ! #X obj 277 159 abs; ! #X msg 216 89 1; ! #X obj 117 185 float; ! #X obj 276 180 float; ! #X obj 117 145 - 0; ! #X obj 277 140 - 1; ! #X connect 0 0 5 0; #X connect 3 0 1 0; #X connect 4 0 2 0; #X connect 5 0 3 0; #X connect 5 0 4 0; ! #X connect 5 1 8 0; ! #X connect 6 0 9 0; ! #X connect 7 0 10 0; #X connect 8 0 11 0; ! #X connect 8 0 12 0; ! #X connect 9 0 3 1; ! #X connect 9 0 11 1; ! #X connect 10 0 4 1; ! #X connect 10 0 12 1; ! #X connect 11 0 6 0; ! #X connect 12 0 7 0; --- 1,45 ---- ! #N canvas 581 288 458 308 10; ! #X obj 87 8 inlet; ! #X obj 151 244 outlet; ! #X obj 319 247 outlet; ! #X obj 159 197 spigot; ! #X obj 319 191 spigot; ! #X obj 158 57 trigger anything bang; ! #X obj 196 152 abs; ! #X floatatom 212 198 5 0 0 0 - - -; ! #X obj 356 147 abs; ! #X msg 295 77 1; ! #X obj 196 173 float; ! #X obj 355 168 float; ! #X obj 86 34 route reset; ! #X msg 103 82 1; ! #X obj 356 128 -; ! #X msg 73 82 0; ! #X obj 196 133 -; ! #X obj 15 35 loadbang; ! #X obj 86 54 bang; ! #X connect 0 0 12 0; #X connect 3 0 1 0; #X connect 4 0 2 0; #X connect 5 0 3 0; #X connect 5 0 4 0; ! #X connect 5 1 9 0; ! #X connect 6 0 10 0; #X connect 8 0 11 0; ! #X connect 9 0 14 0; ! #X connect 9 0 16 0; ! #X connect 10 0 3 1; ! #X connect 10 0 7 0; ! #X connect 10 0 16 1; ! #X connect 11 0 4 1; ! #X connect 11 0 14 1; ! #X connect 12 0 18 0; ! #X connect 12 1 5 0; ! #X connect 13 0 14 1; ! #X connect 14 0 8 0; ! #X connect 15 0 16 1; ! #X connect 16 0 6 0; ! #X connect 17 0 13 0; ! #X connect 17 0 15 0; ! #X connect 18 0 13 0; ! #X connect 18 0 15 0;

1 0

abstractions Makefile,1.21,1.22
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/abstractions In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv21524 Modified Files: Makefile Log Message: added purepd to the Pd-extended build system Index: Makefile =================================================================== RCS file: /cvsroot/pure-data/abstractions/Makefile,v retrieving revision 1.21 retrieving revision 1.22 diff -C2 -d -r1.21 -r1.22 *** Makefile 16 Dec 2005 18:39:15 -0000 1.21 --- Makefile 11 Mar 2006 04:24:33 -0000 1.22 *************** *** 33,37 **** gyre_install keyboardkeys_install la_install-kitchen list-abs_install memento_install \ nusmuk_install nqpoly_install parazit_install pddp_install pixeltango_install \ ! rradical_install @echo " " @echo "abstractions install succeeded!" --- 33,37 ---- gyre_install keyboardkeys_install la_install-kitchen list-abs_install memento_install \ nusmuk_install nqpoly_install parazit_install pddp_install pixeltango_install \ ! purepd_install rradical_install @echo " " @echo "abstractions install succeeded!" *************** *** 240,243 **** --- 240,253 ---- #------------------------------------------------------------------------------- + # PUREPD + PUREPD_NAME = purepd + purepd_install: + install -d $(objectsdir)/$(PUREPD_NAME) + install -p $(abstractions_src)/purepd/*.pd \ + $(objectsdir)/$(PUREPD_NAME) + + + + #------------------------------------------------------------------------------- # RRADical RRADICAL_NAME = rradical

1 0

abstractions/purepd alternate.pd,NONE,1.1
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/abstractions/purepd In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv19314 Added Files: alternate.pd Log Message: Gem's [alternate] written in Pd --- NEW FILE: alternate.pd --- #N canvas 581 288 454 304 10; #X obj 81 23 inlet; #X obj 72 256 outlet; #X obj 273 254 outlet; #X obj 80 209 spigot; #X obj 240 203 spigot; #X obj 79 69 trigger anything bang; #X obj 117 164 abs; #X obj 277 159 abs; #X msg 216 89 1; #X obj 117 185 float; #X obj 276 180 float; #X obj 117 145 - 0; #X obj 277 140 - 1; #X connect 0 0 5 0; #X connect 3 0 1 0; #X connect 4 0 2 0; #X connect 5 0 3 0; #X connect 5 0 4 0; #X connect 5 1 8 0; #X connect 6 0 9 0; #X connect 7 0 10 0; #X connect 8 0 11 0; #X connect 8 0 12 0; #X connect 9 0 3 1; #X connect 9 0 11 1; #X connect 10 0 4 1; #X connect 10 0 12 1; #X connect 11 0 6 0; #X connect 12 0 7 0;

1 0

[PD-cvs] externals/hardware/arduino/examples PD_inputs_to_PD.pd, 1.2, 1.3 PD_send_potentiometer.pd, 1.2, 1.3 PD_two_potentiometers.pd, 1.1, 1.2
by Hans-Christoph Steiner 11 Mar '06

11 Mar '06

Update of /cvsroot/pure-data/externals/hardware/arduino/examples In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv5017 Modified Files: PD_inputs_to_PD.pd PD_send_potentiometer.pd PD_two_potentiometers.pd Log Message: rewrote PD_inputs_to_PD.pd using PD_two_potentiometers as a starting place, but made improvements on the algorithm; added GPL statement to all Index: PD_inputs_to_PD.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_inputs_to_PD.pd,v retrieving revision 1.2 retrieving revision 1.3 diff -C2 -d -r1.2 -r1.3 *** PD_inputs_to_PD.pd 5 Mar 2006 06:48:01 -0000 1.2 --- PD_inputs_to_PD.pd 11 Mar 2006 02:04:52 -0000 1.3 *************** *** 1,59 **** ! #N canvas 583 37 662 485 10; ! #X obj 29 56 r pushButton2; ! #X obj 29 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 129 56 r pushButton3; ! #X obj 129 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 229 56 r pushButton4; ! #X obj 229 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 329 56 r pushButton5; ! #X obj 329 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 429 56 r pushButton6; ! #X obj 429 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 529 56 r pushButton7; ! #X obj 529 76 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 127 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 127 109 r potentioMeter0; ! #X obj 248 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 248 109 r potentioMeter1; ! #X obj 369 129 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 369 109 r potentioMeter2; ! #X text 242 298 On Mac OS X \, set this to the right value:; ! #X msg 192 255 open \$1; ! #X obj 192 358 comport 1 9600; ! #X text 107 186 You might need to select another port \, check the ! Pd window to see if it connected successfully:; ! #X obj 193 421 moses; ! #X obj 724 500; ! #X msg 823 360; ! #X obj 838 358; ! #X msg 820 377; ! #X msg 252 255 close; ! #X obj 192 392 select 10; ! #X text 263 392 select new line; ! #X obj 262 426 print; ! #X obj 165 423 bng 15 250 50 0 empty empty empty 0 -6 0 8 -262144 -1 ! -1; ! #X text 16 13 This patch works with the example Arduino firmware of the same name.; ! #N canvas 162 133 518 368 serin 0; ! #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; ! #X obj 241 251 s \$0-number-canvas; ! #X obj 100 101 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; ! #X obj 101 134 + 1; ! #X obj 100 173 outlet; ! #X obj 101 39 inlet; ! #X msg 241 228 label \$1; ! #X obj 241 206 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; --- 1,46 ---- ! #N canvas 1030 43 584 697 10; ! #X obj 480 668 import zexy; ! #X obj 21 78 nbx 4 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 91 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 161 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 231 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 301 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 371 78 nbx 3 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -241291 -1 -1 0 256; ! #X obj 21 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 122 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X obj 223 132 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 -3754 -1 -1 0 256; ! #X text 160 241 On Mac OS X \, set this to the right value:; ! #X msg 100 220 open \$1; ! #X obj 100 287 comport 1 9600; ! #X text 15 156 You might need to select another port \, check the Pd ! window to see if it connected successfully:; ! #X obj 724 492; ! #X msg 823 352; ! #X obj 838 350; ! #X msg 820 369; ! #X msg 160 220 close; ! #X obj 100 311 select 10; ! #X text 16 5 This patch works with the example Arduino firmware of the same name.; ! #N canvas 162 133 526 376 serin 0; ! #X obj 120 61 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 -1 0; ! #X obj 200 225 s \$0-number-canvas; ! #X obj 60 61 hradio 15 1 0 4 empty empty empty 0 -6 0 8 -225271 -1 -1 0; ! #X obj 60 108 + 1; ! #X obj 59 147 outlet; ! #X obj 60 13 inlet; ! #X msg 200 202 label \$1; ! #X obj 200 180 makefilename %d; #X connect 2 0 3 0; #X connect 3 0 4 0; *************** *** 62,83 **** #X connect 6 0 1 0; #X connect 7 0 6 0; ! #X coords 0 -1 1 1 76 17 1 100 100; ! #X restore 192 232 pd serin; ! #X text 273 233 serial port #; ! #X msg 246 316 devicename /dev/tty.usbserial-191; ! #X connect 0 0 1 0; ! #X connect 2 0 3 0; ! #X connect 4 0 5 0; ! #X connect 6 0 7 0; ! #X connect 8 0 9 0; ! #X connect 10 0 11 0; ! #X connect 13 0 12 0; ! #X connect 15 0 14 0; ! #X connect 17 0 16 0; ! #X connect 19 0 20 0; ! #X connect 20 0 28 0; ! #X connect 27 0 20 0; ! #X connect 28 0 31 0; ! #X connect 28 1 30 0; ! #X connect 33 0 19 0; ! #X connect 35 0 20 0; --- 49,127 ---- #X connect 6 0 1 0; #X connect 7 0 6 0; ! #X coords 0 -1 1 1 76 17 1 60 60; ! #X restore 100 197 pd serin; ! #X text 181 198 serial port #; ! #X msg 164 259 devicename /dev/tty.usbserial-191; ! #X obj 265 551 +; ! #X obj 235 572 float; ! #X obj 244 415 trigger float bang; ! #X obj 281 512 float; ! #X obj 281 531 * 10; ! #X obj 347 536 float; ! #X msg 311 493 0; ! #X text 336 493 <-- reset for the next pot reading; ! #X obj 121 572 makefilename %c; ! #X obj 121 596 pack symbol float; ! #X msg 122 625 \; \$1 \$2; ! #X obj 158 333 moses 64; ! #X obj 21 112 receive A; ! #X obj 122 112 receive B; ! #X obj 223 112 receive C; ! #X obj 91 58 receive E; ! #X obj 21 58 receive D; ! #X obj 161 58 receive F; ! #X obj 231 58 receive G; ! #X obj 301 58 receive H; ! #X obj 371 58 receive I; ! #X obj 244 365 makefilename %c; ! #X obj 244 385 symbol2list; ! #X obj 75 458 trigger float bang bang; ! #X obj 87 521 float; ! #X text 12 95 potentiometers:; ! #X text 10 39 pushbuttons; ! #X text 359 365 <-- convert integer to ASCII; ! #X text 327 384 <-- converts the ASCII digit; ! #X text 404 396 symbol to a float; ! #X text 170 311 <-- filter out newline characters; ! #X text 169 633 <-- send to a [receive] using the letter as the name ! ; ! #X text 8 543 store letter to output with value; ! #X text 221 334 <-- split the labels from the data; ! #X text 281 675 released under the GNU GPL; ! #X text 67 660 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> ! ; ! #X connect 11 0 12 0; ! #X connect 12 0 19 0; ! #X connect 18 0 12 0; ! #X connect 19 1 35 0; ! #X connect 21 0 11 0; ! #X connect 23 0 12 0; ! #X connect 24 0 25 1; ! #X connect 24 0 29 0; ! #X connect 25 0 33 1; ! #X connect 26 0 24 0; ! #X connect 26 1 27 0; ! #X connect 27 0 28 0; ! #X connect 28 0 24 1; ! #X connect 29 0 27 1; ! #X connect 30 0 27 1; ! #X connect 32 0 33 0; ! #X connect 33 0 34 0; ! #X connect 35 0 45 0; ! #X connect 35 1 47 0; ! #X connect 36 0 7 0; ! #X connect 37 0 8 0; ! #X connect 38 0 9 0; ! #X connect 39 0 2 0; ! #X connect 40 0 1 0; ! #X connect 41 0 3 0; ! #X connect 42 0 4 0; ! #X connect 43 0 5 0; ! #X connect 44 0 6 0; ! #X connect 45 0 46 0; ! #X connect 46 0 26 0; ! #X connect 47 0 48 1; ! #X connect 47 1 48 0; ! #X connect 47 2 30 0; ! #X connect 47 2 25 0; ! #X connect 48 0 32 0; Index: PD_send_potentiometer.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_send_potentiometer.pd,v retrieving revision 1.2 retrieving revision 1.3 diff -C2 -d -r1.2 -r1.3 *** PD_send_potentiometer.pd 5 Mar 2006 06:48:01 -0000 1.2 --- PD_send_potentiometer.pd 11 Mar 2006 02:04:52 -0000 1.3 *************** *** 1,3 **** ! #N canvas 66 362 498 358 10; #X text 151 136 On Mac OS X \, set this to the right value:; #X obj 101 196 comport 1 9600; --- 1,3 ---- ! #N canvas 66 362 502 362 10; #X text 151 136 On Mac OS X \, set this to the right value:; #X obj 101 196 comport 1 9600; *************** *** 7,11 **** #X msg 155 153 devicename /dev/tty.usbserial-191; #X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 13 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 --- 7,11 ---- #X msg 155 153 devicename /dev/tty.usbserial-191; #X obj 100 229 nbx 6 16 -1e+37 1e+37 0 0 empty empty empty 0 -6 0 14 ! -3754 -1 -1 0 256; #N canvas 162 133 518 368 serin 0; #X obj 160 101 cnv 15 15 15 empty \$0-number-canvas 1 4 7 0 14 -233017 *************** *** 35,38 **** --- 35,41 ---- full voltage and current will go to the input. This could kill your board!; + #X text 247 338 released under the GNU GPL; + #X text 33 323 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> + ; #X connect 1 0 5 0; #X connect 3 0 1 0; Index: PD_two_potentiometers.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/examples/PD_two_potentiometers.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** PD_two_potentiometers.pd 5 Mar 2006 06:48:01 -0000 1.1 --- PD_two_potentiometers.pd 11 Mar 2006 02:04:52 -0000 1.2 *************** *** 1,4 **** ! #N canvas 327 35 530 629 10; ! #X obj 420 2 import zexy; #X text 127 139 On Mac OS X \, set this to the right value:; #X obj 77 195 comport 1 9600; --- 1,4 ---- ! #N canvas 1102 74 533 633 10; ! #X obj 431 598 import zexy; #X text 127 139 On Mac OS X \, set this to the right value:; #X obj 77 195 comport 1 9600; *************** *** 7,11 **** #X msg 137 104 close; #X msg 131 156 devicename /dev/tty.usbserial-191; ! #X obj 111 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15 30 1 14 -3754 -1 -1 0 256; #N canvas 162 133 518 368 serin 0; --- 7,11 ---- #X msg 137 104 close; #X msg 131 156 devicename /dev/tty.usbserial-191; ! #X obj 110 496 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_0 -15 30 1 14 -3754 -1 -1 0 256; #N canvas 162 133 518 368 serin 0; *************** *** 32,36 **** #X text 4 -3 This patch works with the example Arduino firmware of the same name.; ! #X text 6 550 CAUTION! Watch out if you connect your potentiometer without an extra resistor \, when you turn it all the way up \, the full voltage and current will go to the input. This could fry your --- 32,36 ---- #X text 4 -3 This patch works with the example Arduino firmware of the same name.; ! #X text 20 537 CAUTION! Watch out if you connect your potentiometer without an extra resistor \, when you turn it all the way up \, the full voltage and current will go to the input. This could fry your *************** *** 53,58 **** #X text 169 225 <-- filter out newline characters; #X obj 156 267 select B A; ! #X obj 209 506 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15 30 1 14 -3754 -1 -1 0 256; #X connect 2 0 13 0; #X connect 4 0 2 0; --- 53,61 ---- #X text 169 225 <-- filter out newline characters; #X obj 156 267 select B A; ! #X obj 209 495 nbx 4 20 -1e+37 1e+37 0 0 empty empty Analog_in_1 -15 30 1 14 -3754 -1 -1 0 256; + #X text 227 606 released under the GNU GPL; + #X text 13 591 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> + ; #X connect 2 0 13 0; #X connect 4 0 2 0;

1 0

externals/iem/iem_tab/src makefile,1.1,1.2
by IOhannes m zmölnig 10 Mar '06

10 Mar '06

Update of /cvsroot/pure-data/externals/iem/iem_tab/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv12774 Modified Files: makefile Log Message: removed dependency on "libpthread" (there is none!); do not touch every file on compilation; exchanged "cc" and "ld" by "$(CC)" and "$(LD)" Index: makefile =================================================================== RCS file: /cvsroot/pure-data/externals/iem/iem_tab/src/makefile,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** makefile 10 Mar 2006 03:05:55 -0000 1.1 --- makefile 10 Mar 2006 12:21:20 -0000 1.2 *************** *** 6,10 **** LDFLAGS = -export-dynamic -shared ! LIB = -ldl -lm -lpthread #select either the DBG and OPT compiler flags below: --- 6,10 ---- LDFLAGS = -export-dynamic -shared ! LIB = -ldl -lm #select either the DBG and OPT compiler flags below: *************** *** 72,81 **** all: $(OBJ) @echo :: $(OBJ) ! ld $(LDFLAGS) -o $(TARGET) *.o $(LIB) strip --strip-unneeded $(TARGET) $(OBJ) : %.o : %.c ! touch $*.c ! cc $(CFLAGS) $(INCLUDE) -c -o $*.o $*.c --- 72,80 ---- all: $(OBJ) @echo :: $(OBJ) ! $(LD) $(LDFLAGS) -o $(TARGET) *.o $(LIB) strip --strip-unneeded $(TARGET) $(OBJ) : %.o : %.c ! $(CC) $(CFLAGS) $(INCLUDE) -c -o $*.o $*.c

1 0

externals/iem/iem_ambi/src makefile,1.1,1.2
by IOhannes m zmölnig 10 Mar '06

10 Mar '06

Update of /cvsroot/pure-data/externals/iem/iem_ambi/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv9924 Modified Files: makefile Log Message: removed "touch" of each c-file; replaced cc and ld by $(CC) and $(LD) Index: makefile =================================================================== RCS file: /cvsroot/pure-data/externals/iem/iem_ambi/src/makefile,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** makefile 10 Mar 2006 01:43:58 -0000 1.1 --- makefile 10 Mar 2006 12:17:20 -0000 1.2 *************** *** 41,50 **** all: $(OBJ) @echo :: $(OBJ) ! ld $(LDFLAGS) -o $(TARGET) *.o $(LIB) strip --strip-unneeded $(TARGET) $(OBJ) : %.o : %.c ! touch $*.c ! cc $(CFLAGS) $(INCLUDE) -c -o $*.o $*.c --- 41,49 ---- all: $(OBJ) @echo :: $(OBJ) ! $(LD) $(LDFLAGS) -o $(TARGET) *.o $(LIB) strip --strip-unneeded $(TARGET) $(OBJ) : %.o : %.c ! $(CC) $(CFLAGS) $(INCLUDE) -c -o $*.o $*.c

1 0

pd/portaudio/pa_unix pa_unix_hostapis.c, 1.10, 1.11 pa_unix_util.c, 1.10, 1.11 pa_unix_util.h, 1.1, 1.2
by Guenter Geiger 10 Mar '06

10 Mar '06

Update of /cvsroot/pure-data/pd/portaudio/pa_unix In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv26116/pa_unix Added Files: pa_unix_hostapis.c pa_unix_util.c pa_unix_util.h Log Message: these files have been removed by mistake, they are necessary for portaudio support --- NEW FILE: pa_unix_util.h --- #ifndef PA_UNIX_UTIL_H #define PA_UNIX_UTIL_H #include "pa_cpuload.h" #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ #define PA_MIN(x,y) ( (x) < (y) ? (x) : (y) ) #define PA_MAX(x,y) ( (x) > (y) ? (x) : (y) ) /* Utilize GCC branch prediction for error tests */ #if defined __GNUC__ && __GNUC__ >= 3 #define UNLIKELY(expr) __builtin_expect( (expr), 0 ) #else #define UNLIKELY(expr) (expr) #endif #define STRINGIZE_HELPER(expr) #expr #define STRINGIZE(expr) STRINGIZE_HELPER(expr) #define PA_UNLESS(expr, code) \ do { \ if( UNLIKELY( (expr) == 0 ) ) \ { \ PaUtil_DebugPrint(( "Expression '" #expr "' failed in '" __FILE__ "', line: " STRINGIZE( __LINE__ ) "\n" )); \ result = (code); \ goto error; \ } \ } while (0); static PaError paUtilErr_; /* Used with PA_ENSURE */ /* Check PaError */ #define PA_ENSURE(expr) \ do { \ if( UNLIKELY( (paUtilErr_ = (expr)) < paNoError ) ) \ { \ PaUtil_DebugPrint(( "Expression '" #expr "' failed in '" __FILE__ "', line: " STRINGIZE( __LINE__ ) "\n" )); \ result = paUtilErr_; \ goto error; \ } \ } while (0); typedef struct { pthread_t callbackThread; } PaUtilThreading; PaError PaUtil_InitializeThreading( PaUtilThreading *threading ); void PaUtil_TerminateThreading( PaUtilThreading *threading ); PaError PaUtil_StartThreading( PaUtilThreading *threading, void *(*threadRoutine)(void *), void *data ); PaError PaUtil_CancelThreading( PaUtilThreading *threading, int wait, PaError *exitResult ); /* State accessed by utility functions */ /* void PaUnix_SetRealtimeScheduling( int rt ); void PaUtil_InitializeThreading( PaUtilThreading *th, PaUtilCpuLoadMeasurer *clm ); PaError PaUtil_CreateCallbackThread( PaUtilThreading *th, void *(*CallbackThreadFunc)( void * ), PaStream *s ); PaError PaUtil_KillCallbackThread( PaUtilThreading *th, PaError *exitResult ); void PaUtil_CallbackUpdate( PaUtilThreading *th ); */ #ifdef __cplusplus } #endif /* __cplusplus */ #endif --- NEW FILE: pa_unix_util.c --- /* * $Id: pa_unix_util.c,v 1.1.2.8 2005/11/20 13:46:13 aknudsen Exp $ * Portable Audio I/O Library * UNIX platform-specific support functions * * Based on the Open Source API proposed by Ross Bencina * Copyright (c) 1999-2000 Ross Bencina * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * Any person wishing to distribute modifications to the Software is * requested to send the modifications to the original developer so that * they can be incorporated into the canonical version. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include <pthread.h> #include <unistd.h> #include <stdlib.h> #include <time.h> #include <sys/time.h> #include <assert.h> #include <string.h> /* For memset */ #include "pa_util.h" #include "pa_unix_util.h" /* Track memory allocations to avoid leaks. */ #if PA_TRACK_MEMORY static int numAllocations_ = 0; #endif void *PaUtil_AllocateMemory( long size ) { void *result = malloc( size ); #if PA_TRACK_MEMORY if( result != NULL ) numAllocations_ += 1; #endif return result; } void PaUtil_FreeMemory( void *block ) { if( block != NULL ) { free( block ); #if PA_TRACK_MEMORY numAllocations_ -= 1; #endif } } int PaUtil_CountCurrentlyAllocatedBlocks( void ) { #if PA_TRACK_MEMORY return numAllocations_; #else return 0; #endif } void Pa_Sleep( long msec ) { #ifdef HAVE_NANOSLEEP struct timespec req = {0}, rem = {0}; PaTime time = msec / 1.e3; req.tv_sec = (time_t)time; assert(time - req.tv_sec < 1.0); req.tv_nsec = (long)((time - req.tv_sec) * 1.e9); nanosleep(&req, &rem); /* XXX: Try sleeping the remaining time (contained in rem) if interrupted by a signal? */ #else while( msec > 999 ) /* For OpenBSD and IRIX, argument */ { /* to usleep must be < 1000000. */ usleep( 999000 ); msec -= 999; } usleep( msec * 1000 ); #endif } /* *** NOT USED YET: *** static int usePerformanceCounter_; static double microsecondsPerTick_; */ void PaUtil_InitializeClock( void ) { /* TODO */ } PaTime PaUtil_GetTime( void ) { #ifdef HAVE_CLOCK_GETTIME struct timespec tp; clock_gettime(CLOCK_REALTIME, &tp); return (PaTime)(tp.tv_sec + tp.tv_nsec / 1.e9); #else struct timeval tv; gettimeofday( &tv, NULL ); return (PaTime) tv.tv_usec / 1000000. + tv.tv_sec; #endif } PaError PaUtil_InitializeThreading( PaUtilThreading *threading ) { (void) paUtilErr_; return paNoError; } void PaUtil_TerminateThreading( PaUtilThreading *threading ) { } PaError PaUtil_StartThreading( PaUtilThreading *threading, void *(*threadRoutine)(void *), void *data ) { pthread_create( &threading->callbackThread, NULL, threadRoutine, data ); return paNoError; } PaError PaUtil_CancelThreading( PaUtilThreading *threading, int wait, PaError *exitResult ) { PaError result = paNoError; void *pret; if( exitResult ) *exitResult = paNoError; /* Only kill the thread if it isn't in the process of stopping (flushing adaptation buffers) */ if( !wait ) pthread_cancel( threading->callbackThread ); /* XXX: Safe to call this if the thread has exited on its own? */ pthread_join( threading->callbackThread, &pret ); #ifdef PTHREAD_CANCELED if( pret && PTHREAD_CANCELED != pret ) #else /* !wait means the thread may have been canceled */ if( pret && wait ) #endif { if( exitResult ) *exitResult = *(PaError *) pret; free( pret ); } return result; } /* static void *CanaryFunc( void *userData ) { const unsigned intervalMsec = 1000; PaUtilThreading *th = (PaUtilThreading *) userData; while( 1 ) { th->canaryTime = PaUtil_GetTime(); pthread_testcancel(); Pa_Sleep( intervalMsec ); } pthread_exit( NULL ); } */ --- NEW FILE: pa_unix_hostapis.c --- /* * $Id: pa_unix_hostapis.c,v 1.1.2.5 2003/10/02 12:35:46 pieter Exp $ * Portable Audio I/O Library UNIX initialization table * * Based on the Open Source API proposed by Ross Bencina * Copyright (c) 1999-2002 Ross Bencina, Phil Burk * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * Any person wishing to distribute modifications to the Software is * requested to send the modifications to the original developer so that * they can be incorporated into the canonical version. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "pa_hostapi.h" PaError PaJack_Initialize( PaUtilHostApiRepresentation **hostApi, PaHostApiIndex index ); PaError PaAlsa_Initialize( PaUtilHostApiRepresentation **hostApi, PaHostApiIndex index ); PaError PaOSS_Initialize( PaUtilHostApiRepresentation **hostApi, PaHostApiIndex index ); /* Added for IRIX, Pieter, oct 2, 2003: */ PaError PaSGI_Initialize( PaUtilHostApiRepresentation **hostApi, PaHostApiIndex index ); PaUtilHostApiInitializer *paHostApiInitializers[] = { #ifdef PA_USE_OSS PaOSS_Initialize, #endif #ifdef PA_USE_ALSA PaAlsa_Initialize, #endif #ifdef PA_USE_JACK PaJack_Initialize, #endif /* Added for IRIX, Pieter, oct 2, 2003: */ #ifdef PA_USE_SGI PaSGI_Initialize, #endif 0 /* NULL terminated array */ }; int paDefaultHostApiIndex = 0;

1 0

pd/portaudio/pablio ringbuffer.h,1.2,1.3
by Guenter Geiger 10 Mar '06

10 Mar '06

Update of /cvsroot/pure-data/pd/portaudio/pablio In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv26116/pablio Added Files: ringbuffer.h Log Message: these files have been removed by mistake, they are necessary for portaudio support --- NEW FILE: ringbuffer.h --- #ifndef _RINGBUFFER_H #define _RINGBUFFER_H #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ /* * $Id: ringbuffer.h,v 1.3 2006/03/10 11:04:58 ggeiger Exp $ * ringbuffer.h * Ring Buffer utility.. * * Author: Phil Burk, http://www.softsynth.com * * This program is distributed with the PortAudio Portable Audio Library. * For more information see: http://www.audiomulch.com/portaudio/ * Copyright (c) 1999-2000 Ross Bencina and Phil Burk * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files * (the "Software"), to deal in the Software without restriction, * including without limitation the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * Any person wishing to distribute modifications to the Software is * requested to send the modifications to the original developer so that * they can be incorporated into the canonical version. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ #include <stdio.h> #include <stdlib.h> #include <math.h> #include "ringbuffer.h" #include <string.h> typedef struct { long bufferSize; /* Number of bytes in FIFO. Power of 2. Set by RingBuffer_Init. */ long writeIndex; /* Index of next writable byte. Set by RingBuffer_AdvanceWriteIndex. */ long readIndex; /* Index of next readable byte. Set by RingBuffer_AdvanceReadIndex. */ long bigMask; /* Used for wrapping indices with extra bit to distinguish full/empty. */ long smallMask; /* Used for fitting indices to buffer. */ char *buffer; } RingBuffer; /* * Initialize Ring Buffer. * numBytes must be power of 2, returns -1 if not. */ long RingBuffer_Init( RingBuffer *rbuf, long numBytes, void *dataPtr ); /* Clear buffer. Should only be called when buffer is NOT being read. */ void RingBuffer_Flush( RingBuffer *rbuf ); /* Return number of bytes available for writing. */ long RingBuffer_GetWriteAvailable( RingBuffer *rbuf ); /* Return number of bytes available for read. */ long RingBuffer_GetReadAvailable( RingBuffer *rbuf ); /* Return bytes written. */ long RingBuffer_Write( RingBuffer *rbuf, void *data, long numBytes ); /* Return bytes read. */ long RingBuffer_Read( RingBuffer *rbuf, void *data, long numBytes ); /* Get address of region(s) to which we can write data. ** If the region is contiguous, size2 will be zero. ** If non-contiguous, size2 will be the size of second region. ** Returns room available to be written or numBytes, whichever is smaller. */ long RingBuffer_GetWriteRegions( RingBuffer *rbuf, long numBytes, void **dataPtr1, long *sizePtr1, void **dataPtr2, long *sizePtr2 ); long RingBuffer_AdvanceWriteIndex( RingBuffer *rbuf, long numBytes ); /* Get address of region(s) from which we can read data. ** If the region is contiguous, size2 will be zero. ** If non-contiguous, size2 will be the size of second region. ** Returns room available to be written or numBytes, whichever is smaller. */ long RingBuffer_GetReadRegions( RingBuffer *rbuf, long numBytes, void **dataPtr1, long *sizePtr1, void **dataPtr2, long *sizePtr2 ); long RingBuffer_AdvanceReadIndex( RingBuffer *rbuf, long numBytes ); #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* _RINGBUFFER_H */

1 0

← Newer
1
...
15
16
17
18
19
20
21
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Pd-cvs March 2006