Pd-cvs December 2006

pd-cvs@lists.iem.at

19 participants
825 discussions

externals/hardware/arduino/Pd_firmware Pd_firmware.pde, 1.21, 1.22
by Hans-Christoph Steiner 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/externals/hardware/arduino/Pd_firmware In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv2374/Pd_firmware Modified Files: Pd_firmware.pde Log Message: - fixed up help file so that everything loads with Pd-extended - fixed up [arduino] so that everything loads with Pd-extended - started to clean up the firmware and wrote lots of TODOs Index: Pd_firmware.pde =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/Pd_firmware/Pd_firmware.pde,v retrieving revision 1.21 retrieving revision 1.22 diff -C2 -d -r1.21 -r1.22 *** Pd_firmware.pde 31 Oct 2006 00:39:07 -0000 1.21 --- Pd_firmware.pde 6 Dec 2006 03:29:06 -0000 1.22 *************** *** 46,49 **** --- 46,50 ---- * TODO: add "pinMode all 0/1" command * TODO: add cycle markers to mark start of analog, digital, pulseIn, and PWM + * TODO: convert to MIDI protocol using SysEx for longer messages */ *************** *** 54,59 **** * software can test whether it will be compatible with the currently * installed firmware. */ ! #define MAJOR_VERSION 0 ! #define MINOR_VERSION 2 /* firmata protocol --- 55,60 ---- * software can test whether it will be compatible with the currently * installed firmware. */ ! #define MAJOR_VERSION 0 // for non-compatible changes ! #define MINOR_VERSION 3 // for backwards compatible changes /* firmata protocol *************** *** 113,122 **** /* 230-239 // UNASSIGNED */ #define REPORT_VERSION 240 // return the firmware version ! /* 240-249 // UNASSIGNED */ #define DISABLE_PWM 250 // next byte sets pin # to disable #define ENABLE_PWM 251 // next two bytes set pin # and duty cycle ! #define DISABLE_SOFTWARE_PWM 252 // next byte sets pin # to disable ! #define ENABLE_SOFTWARE_PWM 253 // next two bytes set pin # and duty cycle ! #define SET_SOFTWARE_PWM_FREQ 254 // set master frequency for software PWMs /* 255 // UNASSIGNED */ --- 114,122 ---- /* 230-239 // UNASSIGNED */ #define REPORT_VERSION 240 // return the firmware version ! /* 240-248 // UNASSIGNED */ ! #define SET_PIN_STATE 249 // set a digital pit to INPUT or OUTPUT #define DISABLE_PWM 250 // next byte sets pin # to disable #define ENABLE_PWM 251 // next two bytes set pin # and duty cycle ! #define RESET 254 // reset if receive 8 of these bytes /* 255 // UNASSIGNED */ *************** *** 124,136 **** /* two byte digital output data format * ---------------------- ! * 0 get ready for digital input bytes (229) * 1 digitalOut 7-13 bitmask * 2 digitalOut 0-6 bitmask */ ! /* two byte PWM data format * ---------------------- ! * 0 get ready for digital input bytes (ENABLE_SOFTWARE_PWM/ENABLE_PWM) ! * 1 pin # * 2 duty cycle expressed as 1 byte (255 = 100%) */ --- 124,136 ---- /* two byte digital output data format * ---------------------- ! * 0 set digital output bytes (229/OUTPUT_TO_DIGITAL_PINS) * 1 digitalOut 7-13 bitmask * 2 digitalOut 0-6 bitmask */ ! /* control PWM * ---------------------- ! * 0 send digital input bytes (ENABLE_PWM) ! * 1 pin # (0-127) * 2 duty cycle expressed as 1 byte (255 = 100%) */ *************** *** 150,153 **** --- 150,194 ---- */ + /* version report format + * Send a single byte 240, Arduino will reply with: + * ---------------------- + * 0 version report header (240) + * 1 major version (0-127) + * 2 minor version (0-127) + */ + + /* PROPOSED PROTOCOL ADDITIONS */ + + /* set digital pin state (249/SET_PIN_STATE) + * ---------------------- + * 0 set digital pin state + * 1 pin number (0-127) + * 2 state (OUTPUT/INPUT, 0/1) */ + + /* toggle analogIn reporting (249/SET_PIN_STATE) + * ---------------------- + * 0 analogIn reporting mode + * 1 pin number (0-127) + * 2 state (0/1) + */ + + /* control PWM 14-bit + * ---------------------- + * 0 send digital input bytes (ENABLE_PWM) + * 1 pin # (0-127) + * 2 duty cycle, high bits (8-13) + * 3 duty cycle, low bits (0-7) + */ + + + /* pulseIn (uses 32-bit value) + * ---------------------- + * 0 pulseIn + * 1 bits 24-31 (most significant byte) + * 2 bits 16-23 + * 3 bits 8-15 + * 4 bits 0-7 (least significant byte) + */ + #define TOTAL_DIGITAL_PINS 14 *************** *** 182,185 **** --- 223,227 ---- boolean digitalInputsEnabled = true; + // TODO: convert this to a bit array int, 1=report, 0=no report byte analogInputsEnabled = 6; *************** *** 274,283 **** setPinMode(storedInputData[0],INPUT); break; - case ENABLE_SOFTWARE_PWM: - break; - case DISABLE_SOFTWARE_PWM: - break; - case SET_SOFTWARE_PWM_FREQ: - break; } executeMultiByteCommand = 0; --- 316,319 ---- *************** *** 307,310 **** --- 343,380 ---- else { switch (inputData) { + case REPORT_VERSION: + Serial.print(REPORT_VERSION, BYTE); + Serial.print(MAJOR_VERSION, BYTE); + Serial.print(MINOR_VERSION, BYTE); + break; + case ENABLE_PWM: + waitForData = 2; // 2 bytes needed (pin#, dutyCycle) + executeMultiByteCommand = inputData; + break; + case DISABLE_PWM: + waitForData = 1; // 1 byte needed (pin#) + executeMultiByteCommand = inputData; + break; + case OUTPUT_TO_DIGITAL_PINS: // bytes to send to digital outputs + firstInputByte = true; + break; + case DISABLE_DIGITAL_INPUTS: // all digital inputs off + digitalInputsEnabled = false; + break; + case ENABLE_DIGITAL_INPUTS: // all digital inputs on + digitalInputsEnabled = true; + break; + case ZERO_ANALOG_INS: // analog input off + case ONE_ANALOG_IN: // analog 0 on + case TWO_ANALOG_INS: // analog 0,1 on + case THREE_ANALOG_INS: // analog 0-2 on + case FOUR_ANALOG_INS: // analog 0-3 on + case FIVE_ANALOG_INS: // analog 0-4 on + case SIX_ANALOG_INS: // analog 0-5 on + case SEVEN_ANALOG_INS: // analog 0-6 on + case EIGHT_ANALOG_INS: // analog 0-7 on + case NINE_ANALOG_INS: // analog 0-8 on + analogInputsEnabled = inputData - ZERO_ANALOG_INS; + break; case SET_PIN_ZERO_TO_IN: // set digital pins to INPUT case SET_PIN_ONE_TO_IN: *************** *** 339,388 **** setPinMode(inputData - SET_PIN_ZERO_TO_OUT, OUTPUT); break; - case DISABLE_DIGITAL_INPUTS: // all digital inputs off - digitalInputsEnabled = false; - break; - case ENABLE_DIGITAL_INPUTS: // all digital inputs on - digitalInputsEnabled = true; - break; - case ZERO_ANALOG_INS: // analog input off - case ONE_ANALOG_IN: // analog 0 on - case TWO_ANALOG_INS: // analog 0,1 on - case THREE_ANALOG_INS: // analog 0-2 on - case FOUR_ANALOG_INS: // analog 0-3 on - case FIVE_ANALOG_INS: // analog 0-4 on - case SIX_ANALOG_INS: // analog 0-5 on - case SEVEN_ANALOG_INS: // analog 0-6 on - case EIGHT_ANALOG_INS: // analog 0-7 on - case NINE_ANALOG_INS: // analog 0-8 on - analogInputsEnabled = inputData - ZERO_ANALOG_INS; - break; - case ENABLE_PWM: - waitForData = 2; // 2 bytes needed (pin#, dutyCycle) - executeMultiByteCommand = inputData; - break; - case DISABLE_PWM: - waitForData = 1; // 1 byte needed (pin#) - executeMultiByteCommand = inputData; - break; - case SET_SOFTWARE_PWM_FREQ: - waitForData = 1; // 1 byte needed (pin#) - executeMultiByteCommand = inputData; - break; - case ENABLE_SOFTWARE_PWM: - waitForData = 2; // 2 bytes needed (pin#, dutyCycle) - executeMultiByteCommand = inputData; - break; - case DISABLE_SOFTWARE_PWM: - waitForData = 1; // 1 byte needed (pin#) - executeMultiByteCommand = inputData; - break; - case OUTPUT_TO_DIGITAL_PINS: // bytes to send to digital outputs - firstInputByte = true; - break; - case REPORT_VERSION: - Serial.print(REPORT_VERSION, BYTE); - Serial.print(MAJOR_VERSION, BYTE); - Serial.print(MINOR_VERSION, BYTE); - break; } } --- 409,412 ---- *************** *** 398,401 **** --- 422,427 ---- // TODO: load state from EEPROM here + Serial.begin(115200); + /* TODO: send digital inputs here, if enabled, to set the initial state on the * host computer, since once in the loop(), the Arduino will only send data on *************** *** 413,417 **** setPinMode(i,INPUT); } - Serial.begin(115200); } --- 439,442 ----

1 0

externals/hardware/arduino arduino-help.pd, 1.17, 1.18 arduino.pd, 1.19, 1.20
by Hans-Christoph Steiner 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/externals/hardware/arduino In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv2374 Modified Files: arduino-help.pd arduino.pd Log Message: - fixed up help file so that everything loads with Pd-extended - fixed up [arduino] so that everything loads with Pd-extended - started to clean up the firmware and wrote lots of TODOs Index: arduino.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/arduino.pd,v retrieving revision 1.19 retrieving revision 1.20 diff -C2 -d -r1.19 -r1.20 *** arduino.pd 31 Oct 2006 01:05:18 -0000 1.19 --- arduino.pd 6 Dec 2006 03:29:06 -0000 1.20 *************** *** 1,9 **** ! #N canvas 497 22 692 320 10; ! #X text 415 277 released under the GNU GPL; ! #X text 10 277 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> ; ! #X obj 11 21 inlet; ! #X obj 10 241 outlet; ! #X obj 494 241 outlet; #N canvas 382 102 637 357 command 0; #X obj 24 7 inlet; --- 1,10 ---- ! #N canvas 497 22 624 356 10; ! #X obj 323 8 import hardware flatspace iemlib mapping; ! #X text 415 317 released under the GNU GPL; ! #X text 10 317 (C) Copyright 2006 Hans-Christoph Steiner <hans(a)at.or.at> ; ! #X obj 11 61 inlet; ! #X obj 10 281 outlet; ! #X obj 494 281 outlet; #N canvas 382 102 637 357 command 0; #X obj 24 7 inlet; *************** *** 181,189 **** #X connect 12 6 11 0; #X connect 13 0 6 0; ! #X restore 11 52 pd command processing; ! #X text 257 242 DEBUG/RAW data (this will change); ! #X obj 379 19 inlet; ! #X text 354 0 raw input; ! #X text 10 -1 processed input; #N canvas 505 101 491 417 make 0; #X obj 37 8 inlet; --- 182,190 ---- #X connect 12 6 11 0; #X connect 13 0 6 0; ! #X restore 11 92 pd command processing; ! #X text 257 282 DEBUG/RAW data (this will change); ! #X obj 379 59 inlet; ! #X text 354 40 raw input; ! #X text 10 39 processed input; #N canvas 505 101 491 417 make 0; #X obj 37 8 inlet; *************** *** 364,383 **** #X connect 12 0 6 0; #X connect 12 1 7 0; ! #X restore 10 165 pd make lists; ! #X obj 288 103 spigot; ! #X obj 319 81 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0 1; ! #X obj 125 120 print comport; ! #X obj 11 96 comport \$1 115200; ! #X obj 288 126 print command; ! #X obj 438 19 import flatspace iemlib mapping; ! #X connect 2 0 5 0; ! #X connect 5 0 11 0; ! #X connect 5 0 14 0; ! #X connect 7 0 14 0; ! #X connect 10 0 3 0; ! #X connect 11 0 15 0; ! #X connect 12 0 11 1; ! #X connect 14 0 4 0; ! #X connect 14 0 10 0; ! #X connect 14 1 13 0; --- 365,383 ---- #X connect 12 0 6 0; #X connect 12 1 7 0; ! #X restore 10 205 pd make lists; ! #X obj 288 143 spigot; ! #X obj 319 121 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0 1; ! #X obj 125 160 print comport; ! #X obj 11 136 comport \$1 115200; ! #X obj 288 166 print command; ! #X connect 3 0 6 0; ! #X connect 6 0 12 0; ! #X connect 6 0 15 0; ! #X connect 8 0 15 0; ! #X connect 11 0 4 0; ! #X connect 12 0 16 0; ! #X connect 13 0 12 1; ! #X connect 15 0 5 0; ! #X connect 15 0 11 0; ! #X connect 15 1 14 0; Index: arduino-help.pd =================================================================== RCS file: /cvsroot/pure-data/externals/hardware/arduino/arduino-help.pd,v retrieving revision 1.17 retrieving revision 1.18 diff -C2 -d -r1.17 -r1.18 *** arduino-help.pd 30 Oct 2006 05:36:51 -0000 1.17 --- arduino-help.pd 6 Dec 2006 03:29:06 -0000 1.18 *************** *** 1,3 **** ! #N canvas 119 23 691 591 10; #N canvas 233 472 462 312 INSTALL-NOTES 0; #X text 39 201 [comport] \, from pd-cvs/externals/iem/comport; --- 1,4 ---- ! #N canvas 463 31 699 599 10; ! #X obj 568 9 import flatspace; #N canvas 233 472 462 312 INSTALL-NOTES 0; #X text 39 201 [comport] \, from pd-cvs/externals/iem/comport; *************** *** 18,29 **** #X restore 25 92 pd INSTALL-NOTES; #X text 150 93 <- read this first !; ! #X obj 26 198 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1 -1 0; ! #X msg 26 216 open \$1; ! #X floatatom 109 215 5 0 0 0 - - -; ! #X msg 37 237 close; ! #X msg 47 258 info; ! #X text 21 175 select/close the serial port:; ! #N canvas 248 49 455 332 DIGITAL-OUTPUT 1; #X text 72 97 I/O the individual pins:; #X text 20 22 NOTE: don't forget to set pins to output mode first! --- 19,30 ---- #X restore 25 92 pd INSTALL-NOTES; #X text 150 93 <- read this first !; ! #X obj 16 172 hradio 15 1 0 8 empty empty empty 0 -6 0 8 -260818 -1 -1 0; ! #X msg 16 190 open \$1; ! #X floatatom 99 189 5 0 0 0 - - -; ! #X msg 27 211 close; ! #X msg 37 232 info; ! #X text 11 149 select/close the serial port:; ! #N canvas 248 49 459 336 DIGITAL-OUTPUT 0; #X text 72 97 I/O the individual pins:; #X text 20 22 NOTE: don't forget to set pins to output mode first! *************** *** 207,233 **** #X connect 21 0 20 0; #X restore 68 404 pd DIGITAL-INPUT; ! #X text 525 229 (0=input \, 1=output); ! #X obj 289 202 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 307 202 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 325 202 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 343 202 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 361 202 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 379 202 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 397 202 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 415 202 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 433 202 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 451 202 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 469 202 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 487 202 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 505 202 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 531 182 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1; ! #X text 530 167 all; ! #X obj 271 202 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1; ! #N canvas 365 337 766 316 send-to-arduino---------------- 0; #X obj 49 54 inlet; #X obj 89 54 inlet; --- 208,234 ---- #X connect 21 0 20 0; #X restore 68 404 pd DIGITAL-INPUT; ! #X text 545 229 (0=input \, 1=output); ! #X obj 309 202 tgl 15 0 empty empty 1 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 327 202 tgl 15 0 empty empty 2 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 345 202 tgl 15 0 empty empty 3 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 363 202 tgl 15 0 empty empty 4 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 381 202 tgl 15 0 empty empty 5 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 399 202 tgl 15 0 empty empty 6 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 417 202 tgl 15 0 empty empty 7 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 435 202 tgl 15 0 empty empty 8 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 453 202 tgl 15 0 empty empty 9 3 -6 0 10 -260818 -1 -1 0 1; ! #X obj 471 202 tgl 15 0 empty empty 10 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 489 202 tgl 15 0 empty empty 11 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 507 202 tgl 15 0 empty empty 12 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 525 202 tgl 15 0 empty empty 13 3 -6 0 10 -260818 -1 -1 0 1 ; ! #X obj 551 182 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0 1; ! #X text 550 167 all; ! #X obj 291 202 tgl 15 0 empty empty 0 3 -6 0 10 -260818 -1 -1 0 1; ! #N canvas 365 337 770 320 send-to-arduino---------------- 0; #X obj 49 54 inlet; #X obj 89 54 inlet; *************** *** 287,295 **** #X connect 26 0 27 0; #X connect 27 0 28 0; ! #X restore 271 229 pd send-to-arduino----------------; ! #X msg 294 255 pinMode 13 1; ! #X text 412 255 set pin 13 to output mode; ! #X text 270 149 Set input/output mode of the pins for digital IO:; ! #N canvas 374 455 496 348 ANALOG-INPUT 0; #X obj 29 59 r \$0-arduino-out; #X obj 29 97 spigot 0; --- 288,296 ---- #X connect 26 0 27 0; #X connect 27 0 28 0; ! #X restore 291 229 pd send-to-arduino----------------; ! #X msg 314 255 pinMode 13 1; ! #X text 432 255 set pin 13 to output mode; ! #X text 290 149 Set input/output mode of the pins for digital IO:; ! #N canvas 374 455 500 352 ANALOG-INPUT 0; #X obj 29 59 r \$0-arduino-out; #X obj 29 97 spigot 0; *************** *** 304,308 **** #X floatatom 321 220 5 0 0 3 analog4 - -; #X floatatom 395 221 5 0 0 3 analog5 - -; ! #N canvas 400 102 662 136 speed-limiting-to-save-cpu------------------------ 0; #X obj 19 31 inlet; --- 305,309 ---- #X floatatom 321 220 5 0 0 3 analog4 - -; #X floatatom 395 221 5 0 0 3 analog5 - -; ! #N canvas 400 102 666 140 speed-limiting-to-save-cpu------------------------ 0; #X obj 19 31 inlet; *************** *** 358,362 **** #X connect 10 5 9 0; #X restore 75 452 pd ANALOG-INPUT; ! #N canvas 462 492 550 366 ANALOG-OUTPUT-PWM 0; #X text 16 17 Analog Output \, PWM (Pulse Width Modulation); #X text 16 53 With the help of PWM you can write analog values to the --- 359,363 ---- #X connect 10 5 9 0; #X restore 75 452 pd ANALOG-INPUT; ! #N canvas 462 488 554 370 ANALOG-OUTPUT-PWM 0; #X text 16 17 Analog Output \, PWM (Pulse Width Modulation); #X text 16 53 With the help of PWM you can write analog values to the *************** *** 407,419 **** #X text 458 547 2006 \, released under GNU GPL \; Gerda Strobl \, Georg Holzmann; ! #X text 86 259 <- list devices; #X obj 484 87 spigot; #X obj 515 65 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0 1; ! #X obj 271 324 send \$0-arduino; #X obj 344 111 send \$0-arduino-out; #X obj 344 67 receive \$0-arduino; ! #X obj 26 280 send \$0-arduino; ! #N canvas 0 22 458 308 GETTING-INFO 0; #X msg 147 65 version; #X msg 207 65 info; --- 408,420 ---- #X text 458 547 2006 \, released under GNU GPL \; Gerda Strobl \, Georg Holzmann; ! #X text 91 261 <- list devices; #X obj 484 87 spigot; #X obj 515 65 tgl 15 0 empty empty empty 17 7 0 10 -262144 -1 -1 0 1; ! #X obj 291 324 send \$0-arduino; #X obj 344 111 send \$0-arduino-out; #X obj 344 67 receive \$0-arduino; ! #X obj 16 294 send \$0-arduino; ! #N canvas 0 22 462 312 GETTING-INFO 0; #X msg 147 65 version; #X msg 207 65 info; *************** *** 432,436 **** #X restore 75 501 pd GETTING-INFO; #X text 191 502 <- example of getting status data; ! #N canvas 0 22 463 265 SWITCHING-INPUTS 0; #X obj 78 197 send \$0-arduino; #X text 25 32 how many analogIns to enable:; --- 433,437 ---- #X restore 75 501 pd GETTING-INFO; #X text 191 502 <- example of getting status data; ! #N canvas 0 22 467 269 SWITCHING-INPUTS 0; #X obj 78 197 send \$0-arduino; #X text 25 32 how many analogIns to enable:; *************** *** 475,523 **** #X obj 484 111 print STATUS; #X text 191 526 <- example of switching inputs on and off; ! #X msg 353 297 digital 13 \$1; ! #X obj 353 279 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 1; ! #X text 454 295 toggle pin 13 on and off; #X obj 344 90 arduino 1; ! #X connect 2 0 3 0; ! #X connect 2 0 4 0; ! #X connect 3 0 47 0; ! #X connect 5 0 47 0; ! #X connect 6 0 47 0; ! #X connect 11 0 27 1; ! #X connect 12 0 27 2; ! #X connect 13 0 27 3; ! #X connect 14 0 27 4; ! #X connect 15 0 27 5; ! #X connect 16 0 27 6; ! #X connect 17 0 27 7; ! #X connect 18 0 27 8; ! #X connect 19 0 27 9; ! #X connect 20 0 27 10; ! #X connect 21 0 27 11; ! #X connect 22 0 27 12; ! #X connect 23 0 27 13; ! #X connect 24 0 23 0; ! #X connect 24 0 22 0; ! #X connect 24 0 21 0; ! #X connect 24 0 20 0; ! #X connect 24 0 19 0; ! #X connect 24 0 18 0; ! #X connect 24 0 17 0; ! #X connect 24 0 16 0; ! #X connect 24 0 15 0; ! #X connect 24 0 14 0; ! #X connect 24 0 13 0; ! #X connect 24 0 12 0; ! #X connect 24 0 11 0; ! #X connect 24 0 26 0; ! #X connect 26 0 27 0; ! #X connect 27 0 44 0; ! #X connect 28 0 44 0; ! #X connect 42 0 51 0; ! #X connect 43 0 42 1; ! #X connect 46 0 56 0; ! #X connect 53 0 44 0; ! #X connect 54 0 53 0; ! #X connect 56 0 45 0; ! #X connect 56 1 42 0; --- 476,527 ---- #X obj 484 111 print STATUS; #X text 191 526 <- example of switching inputs on and off; ! #X msg 373 297 digital 13 \$1; ! #X obj 373 279 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 1; ! #X text 474 295 toggle pin 13 on and off; #X obj 344 90 arduino 1; ! #X msg 38 260 devices; ! #X text 71 232 <- info for current connection; ! #X connect 3 0 4 0; ! #X connect 3 0 5 0; ! #X connect 4 0 48 0; ! #X connect 6 0 48 0; ! #X connect 7 0 48 0; ! #X connect 12 0 28 1; ! #X connect 13 0 28 2; ! #X connect 14 0 28 3; ! #X connect 15 0 28 4; ! #X connect 16 0 28 5; ! #X connect 17 0 28 6; ! #X connect 18 0 28 7; ! #X connect 19 0 28 8; ! #X connect 20 0 28 9; ! #X connect 21 0 28 10; ! #X connect 22 0 28 11; ! #X connect 23 0 28 12; ! #X connect 24 0 28 13; ! #X connect 25 0 24 0; ! #X connect 25 0 23 0; ! #X connect 25 0 22 0; ! #X connect 25 0 21 0; ! #X connect 25 0 20 0; ! #X connect 25 0 19 0; ! #X connect 25 0 18 0; ! #X connect 25 0 17 0; ! #X connect 25 0 16 0; ! #X connect 25 0 15 0; ! #X connect 25 0 14 0; ! #X connect 25 0 13 0; ! #X connect 25 0 12 0; ! #X connect 25 0 27 0; ! #X connect 27 0 28 0; ! #X connect 28 0 45 0; ! #X connect 29 0 45 0; ! #X connect 43 0 52 0; ! #X connect 44 0 43 1; ! #X connect 47 0 57 0; ! #X connect 54 0 45 0; ! #X connect 55 0 54 0; ! #X connect 57 0 46 0; ! #X connect 57 1 43 0; ! #X connect 58 0 48 0;

1 0

pd/src desire.c,1.1.2.217.2.34,1.1.2.217.2.35
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv28123 Modified Files: Tag: desiredata desire.c Log Message: amd64 fix Index: desire.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/desire.c,v retrieving revision 1.1.2.217.2.34 retrieving revision 1.1.2.217.2.35 diff -C2 -d -r1.1.2.217.2.34 -r1.1.2.217.2.35 *** desire.c 6 Dec 2006 01:24:57 -0000 1.1.2.217.2.34 --- desire.c 6 Dec 2006 03:08:18 -0000 1.1.2.217.2.35 *************** *** 7814,7818 **** hashvalue v; post("newest_table = {"); ! hash_foreach(k,v,newest_table) post(" x%lx -> %5d",(void*)k,(int)v); post("}"); } --- 7814,7818 ---- hashvalue v; post("newest_table = {"); ! hash_foreach(k,v,newest_table) post(" x%lx -> %5ld",(void*)k,(long)v); post("}"); }

1 0

doc/tutorials/sound feedback_delay_network.pd,1.1,1.2
by Hans-Christoph Steiner 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/doc/tutorials/sound In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv21310 Modified Files: feedback_delay_network.pd Log Message: [import] needs to be the first object loaded Index: feedback_delay_network.pd =================================================================== RCS file: /cvsroot/pure-data/doc/tutorials/sound/feedback_delay_network.pd,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** feedback_delay_network.pd 11 Apr 2006 01:11:55 -0000 1.1 --- feedback_delay_network.pd 6 Dec 2006 02:49:44 -0000 1.2 *************** *** 1,3 **** ! #N canvas 319 233 649 478 10; #X obj 541 21 pddp/dsp; #X obj 10 7 cnv 15 400 40 empty empty feedback_delay_network 20 12 --- 1,4 ---- ! #N canvas 319 233 653 482 10; ! #X obj 459 56 import rradical creb; #X obj 541 21 pddp/dsp; #X obj 10 7 cnv 15 400 40 empty empty feedback_delay_network 20 12 *************** *** 30,34 **** when you abuse them:; #X msg 231 264 reset; - #X obj 459 56 import rradical creb; #X text 20 426 For more info \, click the link:; #X text 329 105 try clicking different parameters sets:; --- 31,34 ---- *************** *** 39,64 **** #X msg 384 221 linear 8 1 5; #X msg 384 241 linear 64 4 5; ! #X connect 3 0 28 0; ! #X connect 4 0 7 0; ! #X connect 5 0 4 1; ! #X connect 6 0 2 0; ! #X connect 6 1 2 1; ! #X connect 7 0 6 0; ! #X connect 8 0 7 1; ! #X connect 8 1 16 0; ! #X connect 9 0 8 0; #X connect 10 0 9 0; ! #X connect 11 0 6 0; ! #X connect 12 0 6 0; ! #X connect 13 0 6 0; ! #X connect 14 0 6 0; ! #X connect 15 0 6 0; ! #X connect 16 0 9 0; ! #X connect 18 0 8 0; ! #X connect 19 0 18 0; ! #X connect 21 0 6 0; ! #X connect 25 0 6 0; ! #X connect 27 0 6 0; ! #X connect 28 0 4 0; ! #X connect 29 0 6 0; ! #X connect 30 0 6 0; --- 39,64 ---- #X msg 384 221 linear 8 1 5; #X msg 384 241 linear 64 4 5; ! #X connect 4 0 28 0; ! #X connect 5 0 8 0; ! #X connect 6 0 5 1; ! #X connect 7 0 3 0; ! #X connect 7 1 3 1; ! #X connect 8 0 7 0; ! #X connect 9 0 8 1; ! #X connect 9 1 17 0; #X connect 10 0 9 0; ! #X connect 11 0 10 0; ! #X connect 12 0 7 0; ! #X connect 13 0 7 0; ! #X connect 14 0 7 0; ! #X connect 15 0 7 0; ! #X connect 16 0 7 0; ! #X connect 17 0 10 0; ! #X connect 19 0 9 0; ! #X connect 20 0 19 0; ! #X connect 22 0 7 0; ! #X connect 25 0 7 0; ! #X connect 27 0 7 0; ! #X connect 28 0 5 0; ! #X connect 29 0 7 0; ! #X connect 30 0 7 0;

1 0

pd/src configure,1.6.2.14.2.1,1.6.2.14.2.2
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv19560 Modified Files: Tag: desiredata configure Log Message: amd64 support Index: configure =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/configure,v retrieving revision 1.6.2.14.2.1 retrieving revision 1.6.2.14.2.2 diff -C2 -d -r1.6.2.14.2.1 -r1.6.2.14.2.2 *** configure 4 Dec 2006 20:57:08 -0000 1.6.2.14.2.1 --- configure 6 Dec 2006 02:44:25 -0000 1.6.2.14.2.2 *************** *** 4322,4325 **** --- 4322,4329 ---- fi + if test `uname -p` = x86_64; then + LDSOFLAGS=$LDSOFLAGS" -fPIC" + fi + if test "$static" = yes; then LDFLAGS="$LDFLAGS -static"; fi

1 0

pd/src configure.in,1.5.4.5.2.16.2.2,1.5.4.5.2.16.2.3
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv19212 Modified Files: Tag: desiredata configure.in Log Message: amd64 support Index: configure.in =================================================================== RCS file: /cvsroot/pure-data/pd/src/configure.in,v retrieving revision 1.5.4.5.2.16.2.2 retrieving revision 1.5.4.5.2.16.2.3 diff -C2 -d -r1.5.4.5.2.16.2.2 -r1.5.4.5.2.16.2.3 *** configure.in 4 Dec 2006 20:57:08 -0000 1.5.4.5.2.16.2.2 --- configure.in 6 Dec 2006 02:43:45 -0000 1.5.4.5.2.16.2.3 *************** *** 78,81 **** --- 78,85 ---- fi + if test `uname -p` = x86_64; then + LDSOFLAGS=$LDSOFLAGS" -fPIC" + fi + if test "$static" = yes; then LDFLAGS="$LDFLAGS -static"; fi

1 0

pd/src desire.tk,1.1.2.600.2.24,1.1.2.600.2.25
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv18159 Modified Files: Tag: desiredata desire.tk Log Message: added Help->Documentation back in Index: desire.tk =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/desire.tk,v retrieving revision 1.1.2.600.2.24 retrieving revision 1.1.2.600.2.25 diff -C2 -d -r1.1.2.600.2.24 -r1.1.2.600.2.25 *** desire.tk 6 Dec 2006 00:02:21 -0000 1.1.2.600.2.24 --- desire.tk 6 Dec 2006 02:41:05 -0000 1.1.2.600.2.25 *************** *** 231,237 **** # you pass the 2nd argument if and only if the message creates an object (or pretends to). ! # this happens with those methods of #X (canvases): ! # obj, msg, floatatom, symbolatom, text, pop, connect, text_setto. ! # #N doesn't count and instead #X restore counts and #X pop counts. proc netsend {message {callback nonesuch}} { global serial replyset sock --- 231,237 ---- # you pass the 2nd argument if and only if the message creates an object (or pretends to). ! # this happens with #N canvas, and those methods of #X: ! # obj, msg, floatatom, symbolatom, text, connect, text_setto, array. ! # this does NOT happen with #X coords/restore/pop. proc netsend {message {callback nonesuch}} { global serial replyset sock *************** *** 554,559 **** source $langfile } else { ! source [file join [file dirname $argh0] ../lib/pd/bin/$langfile] ! } --- 554,558 ---- source $langfile } else { ! source [file join [file dirname [file dirname $argh0]] lib/pd/bin/$langfile] } *************** *** 688,698 **** frame .controls.switches foreach {w x y z} { ! audiobutton audio ctrls_audio_on {pd pd dsp $ctrls_audio_on} ! meterbutton meters ctrls_meter_on {pd pd meters $ctrls_meter_on} } { pack [checkbutton .controls.switches.$w -text [say $x] \ -variable $y -anchor w -command $z] -side left } ! pack [button .controls.switches.dio -text [say io_errors] -command {pd pd audiostatus} -padx 5] pack .controls.switches -side right frame .debug --- 687,697 ---- frame .controls.switches foreach {w x y z} { ! audiobutton audio ctrls_audio_on {netsend "pd dsp $ctrls_audio_on"} ! meterbutton meters ctrls_meter_on {netsend "pd meters $ctrls_meter_on"} } { pack [checkbutton .controls.switches.$w -text [say $x] \ -variable $y -anchor w -command $z] -side left } ! pack [button .controls.switches.dio -text [say io_errors] -command {netsend "pd audiostatus"} -padx 5] pack .controls.switches -side right frame .debug *************** *** 838,842 **** } ! proc pdtk_watchdog {} {pd pd ping; after 2000 {pdtk_watchdog}} proc accel_munge {acc} { --- 837,841 ---- } ! proc pdtk_watchdog {} {netsend "pd ping"; after 2000 {pdtk_watchdog}} proc accel_munge {acc} { *************** *** 896,900 **** set basename [string range $filename [expr $i+1] end] if {[string last .pd $filename] >= 0} { ! pd pd open [enquote $basename] [enquote $folder] } } --- 895,899 ---- set basename [string range $filename [expr $i+1] end] if {[string last .pd $filename] >= 0} { ! netsend "pd open [enquote $basename] [enquote $folder]" } } *************** *** 912,916 **** def Client quit {} { set answer [tk_messageBox -message "Do you really wish to quit?" -type yesno -icon question] ! switch -- $answer {yes {pd pd quit; exit}} } --- 911,915 ---- def Client quit {} { set answer [tk_messageBox -message "Do you really wish to quit?" -type yesno -icon question] ! switch -- $answer {yes {netsend "pd quit"; exit}} } *************** *** 942,946 **** $self populate_menu find {find find_again find_last_error} $self populate_menu help { ! about class_browser client_class_tree clipboard_view history_view do_what_i_mean {} test_audio_and_midi load_meter latency_meter} } --- 941,945 ---- $self populate_menu find {find find_again find_last_error} $self populate_menu help { ! about documentation class_browser client_class_tree clipboard_view history_view do_what_i_mean {} test_audio_and_midi load_meter latency_meter} } *************** *** 1045,1049 **** read_ddrc "defaults.ddrc" } else { ! read_ddrc [file join [file dirname $argh0] "../lib/pd/bin/defaults.ddrc"] } read_ddrc --- 1044,1048 ---- read_ddrc "defaults.ddrc" } else { ! read_ddrc [file join [file dirname [file dirname $argh0]] "lib/pd/bin/defaults.ddrc"] } read_ddrc *************** *** 1358,1370 **** } ! def Canvas new_file {} {global main; $main new_file} ! def Canvas open_file {} {global main; $main open_file} ! def Canvas send_message {} {global main; $main send_message} ! def Canvas paths {} {global main; $main paths} ! def Client paths {} {pd pd start-path-dialog} def Client test_audio_and_midi {} {menu_doc_open doc/7.stuff/tools testtone.pd } def Client load_meter {} {menu_doc_open doc/7.stuff/tools load-meter.pd} def Client latency_meter {} {menu_doc_open doc/7.stuff/tools latency.pd } - def Client menu_documentation {} {pd menu_documentation} def Client about {} {AboutDialog new} def Client class_browser {} {Browser new_as browser browser 0 0 ""} --- 1357,1382 ---- } ! def Client documentation {} { ! set filename [tk_getOpenFile -defaultextension .pd \ ! -filetypes { {{documentation} {.pd .txt .htm}} } -initialdir $::docdir] ! if {$filename != ""} { ! if {[string first .txt $filename] >= 0} { ! menu_opentext $filename ! } elseif {[string first .htm $filename] >= 0} { ! menu_openhtml $filename ! } else { ! set help_directory [string range $filename 0 [expr [string last / $filename]-1]] ! set basename [string range $filename [expr [string last / $filename]+1] end] ! netsend "pd open [pdtk_enquote $basename] [pdtk_enquote $help_directory]" ! } ! } ! } ! ! def Canvas new_file {} {$::main new_file} ! def Canvas open_file {} {$::main open_file} ! def Canvas send_message {} {$::main send_message} def Client test_audio_and_midi {} {menu_doc_open doc/7.stuff/tools testtone.pd } def Client load_meter {} {menu_doc_open doc/7.stuff/tools load-meter.pd} def Client latency_meter {} {menu_doc_open doc/7.stuff/tools latency.pd } def Client about {} {AboutDialog new} def Client class_browser {} {Browser new_as browser browser 0 0 ""} *************** *** 1378,1384 **** set pd_guidir ${pd_prefix}/lib/pd set doc_number 1 proc menu_opentext {filename} { ! global doc_number pd_guidir pd_myversion set w [format ".help%d" $doc_number] toplevel $w --- 1390,1402 ---- set pd_guidir ${pd_prefix}/lib/pd set doc_number 1 + set updir [file dirname [file dirname $argh0]] + if {[file exists $updir/lib/pd/doc]} { + set docdir $updir/lib/pd/doc + } else { + set docdir $updir/doc + } proc menu_opentext {filename} { ! global doc_number pd_myversion set w [format ".help%d" $doc_number] toplevel $w *************** *** 1395,1399 **** while {![eof $f]} { set bigstring [read $f 1000] ! regsub -all PD_BASEDIR $bigstring $pd_guidir bigstring regsub -all PD_VERSION $bigstring $pd_myversion bigstring $w.1.text insert end $bigstring --- 1413,1417 ---- while {![eof $f]} { set bigstring [read $f 1000] ! regsub -all PD_BASEDIR $bigstring $::pd_guidir bigstring regsub -all PD_VERSION $bigstring $pd_myversion bigstring $w.1.text insert end $bigstring *************** *** 1406,1411 **** proc menu_doc_open {subdir basename} { ! global pd_guidir ! set dirname $pd_guidir/$subdir if {[string first .txt $basename] >= 0} { return [menu_opentext $dirname/$basename] --- 1424,1428 ---- proc menu_doc_open {subdir basename} { ! set dirname $::pd_guidir/$subdir if {[string first .txt $basename] >= 0} { return [menu_opentext $dirname/$basename]

1 0

[PD-cvs] pd/src s_path.c, 1.3.4.6.2.8.2.1, 1.3.4.6.2.8.2.2 desire.c, 1.1.2.217.2.33, 1.1.2.217.2.34
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv22866 Modified Files: Tag: desiredata s_path.c desire.c Log Message: removed pd start-startup-dialog and pd startup-dialog Index: s_path.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/s_path.c,v retrieving revision 1.3.4.6.2.8.2.1 retrieving revision 1.3.4.6.2.8.2.2 diff -C2 -d -r1.3.4.6.2.8.2.1 -r1.3.4.6.2.8.2.2 *** s_path.c 6 Dec 2006 01:23:07 -0000 1.3.4.6.2.8.2.1 --- s_path.c 6 Dec 2006 01:24:57 -0000 1.3.4.6.2.8.2.2 *************** *** 516,585 **** } - /* undo pdtk_encodedialog. This allows dialogs to send spaces, commas, dollars, and semis down here. */ - t_symbol *sys_decodedialog(t_symbol *s) - { - char buf[MAXPDSTRING], *sp = s->s_name; - int i; - if (*sp != '+') - bug("sys_decodedialog: %s", sp); - else sp++; - for (i = 0; i < MAXPDSTRING-1; i++, sp++) - { - if (!sp[0]) - break; - if (sp[0] == '+') - { - if (sp[1] == '_') - buf[i] = ' ', sp++; - else if (sp[1] == '+') - buf[i] = '+', sp++; - else if (sp[1] == 'c') - buf[i] = ',', sp++; - else if (sp[1] == 's') - buf[i] = ';', sp++; - else if (sp[1] == 'd') - buf[i] = '$', sp++; - else buf[i] = sp[0]; - } - else buf[i] = sp[0]; - } - buf[i] = 0; - return (gensym(buf)); - } - - /* start a startup dialog window */ - void glob_start_startup_dialog(t_pd *dummy) - { - char buf[MAXPDSTRING]; - int i; - t_namelist *nl; - - for (nl = sys_externlist, i = 0; nl && i < 10; nl = nl->nl_next, i++) - sys_vgui("pd_set pd_startup%d \"%s\"\n", i, nl->nl_string); - for (; i < 10; i++) - sys_vgui("pd_set pd_startup%d \"\"\n", i); - - sprintf(buf, "pdtk_startup_dialog %%s %d \"%s\"\n", sys_defeatrt, - sys_flags->s_name); - gfxstub_new(&glob_pdobject, (void *)glob_start_startup_dialog, buf); - } - - /* new values from dialog window */ - void glob_startup_dialog(t_pd *dummy, t_symbol *s, int argc, t_atom *argv) - { - int i; - namelist_free(sys_externlist); - sys_externlist = 0; - sys_defeatrt = atom_getintarg(0, argc, argv); - sys_flags = sys_decodedialog(atom_getsymbolarg(1, argc, argv)); - for (i = 0; i < argc-2; i++) - { - t_symbol *s = sys_decodedialog(atom_getsymbolarg(i+2, argc, argv)); - if (*s->s_name) - sys_externlist = namelist_append_files(sys_externlist, s->s_name); - } - } - - #ifdef DESIRE void glob_update_path (void) { --- 516,519 ---- Index: desire.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/desire.c,v retrieving revision 1.1.2.217.2.33 retrieving revision 1.1.2.217.2.34 diff -C2 -d -r1.1.2.217.2.33 -r1.1.2.217.2.34 *** desire.c 6 Dec 2006 01:23:07 -0000 1.1.2.217.2.33 --- desire.c 6 Dec 2006 01:24:57 -0000 1.1.2.217.2.34 *************** *** 7841,7846 **** class_addmethod3(c,glob_midi_properties, "midi-properties", "F"); class_addmethod3(c,glob_midi_dialog, "midi-dialog", "*"); - class_addmethod3(c,glob_start_startup_dialog,"start-startup-dialog", ""); - class_addmethod3(c,glob_startup_dialog, "startup-dialog", "*"); class_addmethod3(c,glob_ping, "ping",""); class_addmethod3(c,glob_tooltips, "tooltips", "F"); --- 7841,7844 ----

1 0

pd/src s_path.c, 1.3.4.6.2.8, 1.3.4.6.2.8.2.1 desire.c, 1.1.2.217.2.32, 1.1.2.217.2.33
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv22152 Modified Files: Tag: desiredata s_path.c desire.c Log Message: removed pd start-path-dialog and pd path-dialog Index: s_path.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/s_path.c,v retrieving revision 1.3.4.6.2.8 retrieving revision 1.3.4.6.2.8.2.1 diff -C2 -d -r1.3.4.6.2.8 -r1.3.4.6.2.8.2.1 *** s_path.c 19 Nov 2006 08:02:21 -0000 1.3.4.6.2.8 --- s_path.c 6 Dec 2006 01:23:07 -0000 1.3.4.6.2.8.2.1 *************** *** 516,521 **** } ! /* undo pdtl_encodedialog. This allows dialogs to send spaces, commas, ! dollars, and semis down here. */ t_symbol *sys_decodedialog(t_symbol *s) { --- 516,520 ---- } ! /* undo pdtk_encodedialog. This allows dialogs to send spaces, commas, dollars, and semis down here. */ t_symbol *sys_decodedialog(t_symbol *s) { *************** *** 549,585 **** } - - /* start a search path dialog window */ - void glob_start_path_dialog(t_pd *dummy) - { - char buf[MAXPDSTRING]; - int i; - t_namelist *nl; - - for (nl = sys_searchpath, i = 0; nl && i < 10; nl = nl->nl_next, i++) - sys_vgui("pd_set pd_path%d \"%s\"\n", i, nl->nl_string); - for (; i < 10; i++) - sys_vgui("pd_set pd_path%d \"\"\n", i); - - sprintf(buf, "pdtk_path_dialog %%s %d %d\n", sys_usestdpath, sys_verbose); - gfxstub_new(&glob_pdobject, (void *)glob_start_path_dialog, buf); - } - - /* new values from dialog window */ - void glob_path_dialog(t_pd *dummy, t_symbol *s, int argc, t_atom *argv) - { - int i; - namelist_free(sys_searchpath); - sys_searchpath = 0; - sys_usestdpath = atom_getintarg(0, argc, argv); - sys_verbose = atom_getintarg(1, argc, argv); - for (i = 0; i < argc-2; i++) - { - t_symbol *s = sys_decodedialog(atom_getsymbolarg(i+2, argc, argv)); - if (*s->s_name) - sys_searchpath = namelist_append_files(sys_searchpath, s->s_name); - } - } - /* start a startup dialog window */ void glob_start_startup_dialog(t_pd *dummy) --- 548,551 ---- Index: desire.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/desire.c,v retrieving revision 1.1.2.217.2.32 retrieving revision 1.1.2.217.2.33 diff -C2 -d -r1.1.2.217.2.32 -r1.1.2.217.2.33 *** desire.c 6 Dec 2006 00:33:29 -0000 1.1.2.217.2.32 --- desire.c 6 Dec 2006 01:23:07 -0000 1.1.2.217.2.33 *************** *** 7841,7846 **** class_addmethod3(c,glob_midi_properties, "midi-properties", "F"); class_addmethod3(c,glob_midi_dialog, "midi-dialog", "*"); - class_addmethod3(c,glob_start_path_dialog,"start-path-dialog", ""); - class_addmethod3(c,glob_path_dialog, "path-dialog", "*"); class_addmethod3(c,glob_start_startup_dialog,"start-startup-dialog", ""); class_addmethod3(c,glob_startup_dialog, "startup-dialog", "*"); --- 7841,7844 ----

1 0

pd/src desire.c,1.1.2.217.2.31,1.1.2.217.2.32
by Mathieu Bouchard 06 Dec '06

06 Dec '06

Update of /cvsroot/pure-data/pd/src In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv3233 Modified Files: Tag: desiredata desire.c Log Message: serial no longer sent by #X restore nor pop (#N canvas instead) Index: desire.c =================================================================== RCS file: /cvsroot/pure-data/pd/src/Attic/desire.c,v retrieving revision 1.1.2.217.2.31 retrieving revision 1.1.2.217.2.32 diff -C2 -d -r1.1.2.217.2.31 -r1.1.2.217.2.32 *** desire.c 5 Dec 2006 23:45:47 -0000 1.1.2.217.2.31 --- desire.c 6 Dec 2006 00:33:29 -0000 1.1.2.217.2.32 *************** *** 777,781 **** static void canvas_pop(t_canvas *x, t_floatarg fvis) { ! pd_set_newest(x); pd_popsym(x); x->loading = 0; --- 777,781 ---- static void canvas_pop(t_canvas *x, t_floatarg fvis) { ! /* pd_set_newest(x); */ pd_popsym(x); x->loading = 0; *************** *** 868,872 **** #undef pd_set_newest void pd_set_newest_debug (t_pd *x, const char *file, int line) { ! post("pd_set_newest(x%lx) called from %s at line %d",(long)x,file,line); pd_set_newest(x); } --- 868,872 ---- #undef pd_set_newest void pd_set_newest_debug (t_pd *x, const char *file, int line) { ! //post("pd_set_newest(x%lx) called from %s at line %d",(long)x,file,line); pd_set_newest(x); }

1 0

← Newer
1
...
69
70
71
72
73
74
75
...
83
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

Pd-cvs December 2006